Download or read book New Trends in Optimal Filtering and Control for Polynomial and Time Delay Systems written by Michael Basin and published by Springer. This book was released on 2009-08-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: 0. 1 Introduction Although the general optimal solution of the ?ltering problem for nonlinear state and observation equations confused with white Gaussian noises is given by the Kushner equation for the conditional density of an unobserved state with respect to obser- tions (see [48] or [41], Theorem 6. 5, formula (6. 79) or [70], Subsection 5. 10. 5, formula (5. 10. 23)), there are a very few known examples of nonlinear systems where the Ku- ner equation can be reduced to a ?nite-dimensional closed system of ?ltering eq- tions for a certain number of lower conditional moments. The most famous result, the Kalman-Bucy ?lter [42], is related to the case of linear state and observation equations, where only two moments, the estimate itself and its variance, form a closed system of ?ltering equations. However, the optimal nonlinear ?nite-dimensional ?lter can be - tained in some other cases, if, for example, the state vector can take only a ?nite number of admissible states [91] or if the observation equation is linear and the drift term in the 2 2 state equation satis?es the Riccati equation df /dx + f = x (see [15]). The complete classi?cation of the “general situation” cases (this means that there are no special - sumptions on the structure of state and observation equations and the initial conditions), where the optimal nonlinear ?nite-dimensional ?lter exists, is given in [95].

Download or read book New Trends in Optimal Filtering and Control for Polynomial and Time Delay Systems written by Michael Basin and published by Springer Science & Business Media. This book was released on 2008-09-23 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: 0. 1 Introduction Although the general optimal solution of the ?ltering problem for nonlinear state and observation equations confused with white Gaussian noises is given by the Kushner equation for the conditional density of an unobserved state with respect to obser- tions (see [48] or [41], Theorem 6. 5, formula (6. 79) or [70], Subsection 5. 10. 5, formula (5. 10. 23)), there are a very few known examples of nonlinear systems where the Ku- ner equation can be reduced to a ?nite-dimensional closed system of ?ltering eq- tions for a certain number of lower conditional moments. The most famous result, the Kalman-Bucy ?lter [42], is related to the case of linear state and observation equations, where only two moments, the estimate itself and its variance, form a closed system of ?ltering equations. However, the optimal nonlinear ?nite-dimensional ?lter can be - tained in some other cases, if, for example, the state vector can take only a ?nite number of admissible states [91] or if the observation equation is linear and the drift term in the 2 2 state equation satis?es the Riccati equation df /dx + f = x (see [15]). The complete classi?cation of the “general situation” cases (this means that there are no special - sumptions on the structure of state and observation equations and the initial conditions), where the optimal nonlinear ?nite-dimensional ?lter exists, is given in [95].

Download or read book Time Delay Systems Methods Applications and New Trends written by Rifat Sipahi and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the control and dynamics of time delay systems; a research field with at least six-decade long history that has been very active especially in the past two decades. In parallel to the new challenges emerging from engineering, physics, mathematics, and economics, the volume covers several new directions including topology induced stability, large-scale interconnected systems, roles of networks in stability, and new trends in predictor-based control and consensus dynamics. The associated applications/problems are described by highly complex models, and require solving inverse problems as well as the development of new theories, mathematical tools, numerically-tractable algorithms for real-time control. The volume, which is targeted to present these developments in this rapidly evolving field, captures a careful selection of the most recent papers contributed by experts and collected under five parts: (i) Methodology: From Retarded to Neutral Continuous Delay Models, (ii) Systems, Signals and Applications, (iii): Numerical Methods, (iv) Predictor-based Control and Compensation, and (v) Networked Control Systems and Multi-agent Systems.

Download or read book Advances in Sliding Mode Control written by B Bandyopadhyay and published by Springer. This book was released on 2013-03-15 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sliding mode control paradigm has become a mature technique for the design of robust controllers for a wide class of systems including nonlinear, uncertain and time-delayed systems. This book is a collection of plenary and invited talks delivered at the 12th IEEE International Workshop on Variable Structure System held at the Indian Institute of Technology, Mumbai, India in January 2012. After the workshop, these researchers were invited to develop book chapters for this edited collection in order to reflect the latest results and open research questions in the area. The contributed chapters have been organized by the editors to reflect the various themes of sliding mode control which are the current areas of theoretical research and applications focus; namely articulation of the fundamental underpinning theory of the sliding mode design paradigm, sliding modes for decentralized system representations, control of time-delay systems, the higher order sliding mode concept, results applicable to nonlinear and underactuated systems, sliding mode observers, discrete sliding mode control together with cutting edge research contributions in the application of the sliding mode concept to real world problems. This book provides the reader with a clear and complete picture of the current trends in Variable Structure Systems and Sliding Mode Control Theory.

Download or read book Topics in Time Delay Systems written by Jean Jacques Loiseau and published by Springer. This book was released on 2009-08-10 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time delays are present in many physical processes due to the period of time it takes for the events to occur. Delays are particularly more pronounced in networks of interconnected systems, such as supply chains and systems controlled over c- munication networks. In these control problems, taking the delays into account is particularly important for performance evaluation and control system’s design. It has been shown, indeed, that delays in a controlled system (for instance, a c- munication delay for data acquisition) may have an “ambiguous” nature: they may stabilize the system, or, in the contrary,they may lead to deteriorationof the clos- loop performance or even instability, depending on the delay value and the system parameters. It is a fact that delays have stabilizing effects, but this is clearly con i- ing for human intuition. Therefore,speci c analysis techniquesand design methods are to be developed to satisfactorily take into account the presence of delays at the design stage of the control system. The research on time delay systems stretches back to 1960s and it has been very active during the last twenty years. During this period, the results have been presented at the main control conferences(CDC, ACC, IFAC), in specialized wo- shops (IFAC TDS series), and published in the leading journals of control engine- ing, systems and control theory, applied and numerical mathematics.

Download or read book Feedback Control for Personalized Medicine written by Esteban A. Hernandez-Vargas and published by Academic Press. This book was released on 2022-04-21 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feedback Control for Personalized Medicine provides ideas on ongoing efforts and obstacles by members of the control engineering community in different biological and medical applications. In addition, the book presents key challenges, insights, tools and theoretical developments that arise from personalized medicine, along with medical concepts that are explained by engineers to help non-experts follow research topics. Several clinical trials have tried to find therapeutic approaches to achieve eradication or at least lifelong, therapy-free, host control of the infection. This has been performed integrating clinical observations, empirical knowledge and information from medical tests to treat patients. As this “trial and error approach is becoming more challenging and unfeasible by the steep increase in the number of different pieces of information and the complexity of large datasets, a systematic and tractable approach that integrates a variety of biological and medical research data into mathematical models and computational algorithms is crucial to harness knowledge and to develop new therapies towards personalized medicine. Presents the most recent research in personalized medicine using control theoretical tools Offers numerical simulations that are analyzed in detail and compared with control experiments Brings the most recent research of control theory in medicine

Download or read book Homogeneous Polynomial Forms for Robustness Analysis of Uncertain Systems written by Graziano Chesi and published by Springer Science & Business Media. This book was released on 2009-07-13 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a number of techniques for robustness analysis of uncertain systems. In it, convex relaxations for several robustness problems are derived by exploiting and providing new results on the theory of homogenous polynomial forms.

Download or read book Nonlinear Filtering and Optimal Phase Tracking written by Zeev Schuss and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an analytical rather than measure-theoretical approach to the derivation of the partial differential equations of nonlinear filtering theory. The basis for this approach is the discrete numerical scheme used in Monte-Carlo simulations of stochastic differential equations and Wiener's associated path integral representation of the transition probability density. Furthermore, it presents analytical methods for constructing asymptotic approximations to their solution and for synthesizing asymptotically optimal filters. It also offers a new approach to the phase tracking problem, based on optimizing the mean time to loss of lock. The book is based on lecture notes from a one-semester special topics course on stochastic processes and their applications that the author taught many times to graduate students of mathematics, applied mathematics, physics, chemistry, computer science, electrical engineering, and other disciplines. The book contains exercises and worked-out examples aimed at illustrating the methods of mathematical modeling and performance analysis of phase trackers.

Download or read book Artificial Neural Networks for Engineering Applications written by Alma Y. Alanis and published by Academic Press. This book was released on 2019-02-07 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Neural Networks for Engineering Applications presents current trends for the solution of complex engineering problems that cannot be solved through conventional methods. The proposed methodologies can be applied to modeling, pattern recognition, classification, forecasting, estimation, and more. Readers will find different methodologies to solve various problems, including complex nonlinear systems, cellular computational networks, waste water treatment, attack detection on cyber-physical systems, control of UAVs, biomechanical and biomedical systems, time series forecasting, biofuels, and more. Besides the real-time implementations, the book contains all the theory required to use the proposed methodologies for different applications. Presents the current trends for the solution of complex engineering problems that cannot be solved through conventional methods Includes real-life scenarios where a wide range of artificial neural network architectures can be used to solve the problems encountered in engineering Contains all the theory required to use the proposed methodologies for different applications

Download or read book Control Technologies for Emerging Micro and Nanoscale Systems written by Evangelos Eleftheriou and published by Springer. This book was released on 2011-07-15 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a selection of the presentations made at the “Workshop on Dynamics and Control of Micro and Nanoscale Systems” held at IBM Research – Zurich, Switzerland, on the 10th and 11th of December 2009. The aim of the workshop was to bring together some of the leading researchers in the field of dynamics and control of micro- and nanoscale systems. It proved an excellent forum for discussing new ideas and approaches.

Download or read book Analysis and Synthesis of Dynamical Systems with Time Delays written by Yuanqing Xia and published by Springer. This book was released on 2009-10-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-delay occurs in many dynamical systems such as biological systems, chemical systems, metallurgical processing systems, nuclear reactor, long transmission lines in pneumatic, hydraulic systems and electrical networks. Especially, in recent years, time-delay which exists in networked control s- temshasbroughtmorecomplexproblemintoanewresearcharea.Frequently, itisasourceofthegenerationofoscillation,instabilityandpoorperformance. Considerable e?ort has been applied to di?erent aspects of linear time-delay systems during recent years. Because the introduction of the delay factor renders the system analysis more complicated, in addition to the di?culties caused by the perturbation or uncertainties, in the control of time-delay s- tems, the problems of robust stability and robust stabilization are of great importance. This book presents some basic theories of stability and stabilization of systems with time-delay, which are related to the main results in this book. More attention will be paid on synthesis of systems with time-delay. That is, sliding mode control of systems with time-delay; networked control systems with time-delay; networked data fusion with random delay.

Download or read book Complexity Analysis and Control of Singular Biological Systems written by Qingling Zhang and published by Springer Science & Business Media. This book was released on 2012-02-18 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complexity, Analysis and Control of Singular Biological Systems follows the control of real-world biological systems at both ecological and phyisological levels concentrating on the application of now-extensively-investigated singular system theory. Much effort has recently been dedicated to the modelling and analysis of developing bioeconomic systems and the text establishes singular examples of these, showing how proper control can help to maintain sustainable economic development of biological resources. The book begins from the essentials of singular systems theory and bifurcations before tackling the use of various forms of control in singular biological systems using examples including predator-prey relationships and viral vaccination and quarantine control. Researchers and graduate students studying the control of complex biological systems are shown how a variety of methods can be brought to bear and practitioners working with the economics of biological systems and their control will also find the monograph illuminating.

Download or read book Analysis and Synthesis of Networked Control Systems written by Yuanqing Xia and published by Springer Science & Business Media. This book was released on 2011-03-14 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Synthesis of Networked Control Systems focuses on essential aspects of this field, including quantization over networks, data fusion over networks, predictive control over networks and fault detection over networks. The networked control systems have led to a complete new range of real-world applications. In recent years, the techniques of Internet of Things are developed rapidly, the research of networked control systems plays a key role in Internet of Things. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. It will be of significant interest to scientists and engineers engaged in the field of Networked Control Systems. Dr. Yuanqing Xia, a professor at Beijing Institute of Technology, has been working on control theory and its applications for over ten years.

Download or read book Linear Time Varying Systems written by Henri Bourlès and published by Springer. This book was released on 2011-04-21 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to propose a new approach to analysis and control of linear time-varying systems. These systems are defined in an intrinsic way, i.e., not by a particular representation (e.g., a transfer matrix or a state-space form) but as they are actually. The system equations, derived, e.g., from the laws of physics, are gathered to form an intrinsic mathematical object, namely a finitely presented module over a ring of operators. This is strongly connected with the engineering point of view, according to which a system is not a specific set of equations but an object of the material world which can be described by equivalent sets of equations. This viewpoint makes it possible to formulate and solve efficiently several key problems of the theory of control in the case of linear time-varying systems. The solutions are based on algebraic analysis. This book, written for engineers, is also useful for mathematicians since it shows how algebraic analysis can be applied to solve engineering problems. Henri Bourlès is a Professor and holds the industrial automation chair at the Conservatoire national des arts et métiers in France. He has been teaching automation for over 20 years in engineering and graduate schools. Bogdan Marinescu is currently research engineer at the French Transmission System Operator (RTE) and Associate Professor at SATIE-Ecole Normale Supérieure de Cachan.

Download or read book Distributed Decision Making and Control written by Rolf Johansson and published by Springer. This book was released on 2011-11-10 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Decision Making and Control is a mathematical treatment of relevant problems in distributed control, decision and multiagent systems, The research reported was prompted by the recent rapid development in large-scale networked and embedded systems and communications. One of the main reasons for the growing complexity in such systems is the dynamics introduced by computation and communication delays. Reliability, predictability, and efficient utilization of processing power and network resources are central issues and the new theory and design methods presented here are needed to analyze and optimize the complex interactions that arise between controllers, plants and networks. The text also helps to meet requirements arising from industrial practice for a more systematic approach to the design of distributed control structures and corresponding information interfaces Theory for coordination of many different control units is closely related to economics and game theory network uses being dictated by congestion-based pricing of a given pathway. The text extends existing methods which represent pricing mechanisms as Lagrange multipliers to distributed optimization in a dynamic setting. In Distributed Decision Making and Control, the main theme is distributed decision making and control with contributions to a general theory and methodology for control of complex engineering systems in engineering, economics and logistics. This includes scalable methods and tools for modeling, analysis and control synthesis, as well as reliable implementations using networked embedded systems. Academic researchers and graduate students in control science, system theory, and mathematical economics and logistics will find mcu to interest them in this collection, first presented orally by the contributors during a sequence of workshops organized in Spring 2010 by the Lund Center for Control of Complex Engineering Systems, a Linnaeus Center at Lund University, Sweden.>

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer Science & Business Media. This book was released on 2010-06-29 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book Optimization Based Clearance of Flight Control Laws written by Andreas Varga and published by Springer. This book was released on 2011-11-23 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the main achievements of the EC funded 6th Framework Program project COFCLUO – Clearance of Flight Control Laws Using Optimization. This project successfully contributed to the achievement of a top-level objective to meet society’s needs for a more efficient, safer and environmentally friendly air transport by providing new techniques and tools for the clearance of flight control laws. This is an important part of the certification and qualification process of an aircraft – a costly and time-consuming process for the aeronautical industry. The overall objective of the COFCLUO project was to develop and apply optimization techniques to the clearance of flight control laws in order to improve efficiency and reliability. In the book, the new techniques are explained and benchmarked against traditional techniques currently used by the industry. The new techniques build on mathematical criteria derived from the certification and qualification requirements together with suitable models of the aircraft. The development of these criteria and models are also presented in the book. Because of wider applicability, the optimization-based clearance of flight control laws will open up the possibility to design innovative aircraft that today are out of the scope using classical clearance tools. Optimization-based clearance will not only increase safety but it will also simplify the whole certification and qualification process, thus significantly reduce cost. The achieved speedup will also support rapid modeling and prototyping and reduce “time to market”.