Download or read book New methods to engineer and seamlessly reconfigure time triggered Ethernet based systems during runtime based on the PROFINET IRT example written by Lukasz Wisniewski and published by Springer. This book was released on 2017-03-20 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this dissertation is to design a concept that would allow to increase the flexibility of currently available Time Triggered Ethernet based (TTEB) systems, however, without affecting their performance and robustness. The main challenges are related to scheduling of time triggered communication that may take significant amount of time and has to be performed on a powerful platform. Additionally, the reliability has to be considered and kept on the required high level. Finally, the reconfiguration has to be optimally done without affecting the currently running system.
Download or read book Intelligence in IoT enabled Smart Cities written by Fadi Al-Turjman and published by CRC Press. This book was released on 2018-12-19 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Cities and intelligence are among the most significant topics in IoT. Intelligence in communication and infrastructure implementation is at the heart of this concept, and its development is a key issue in smart cities. This book addresses the challenges in realizing intelligence in smart cities and sensing platforms in the era of cloud computing and IoT, varying from cost and energy efficiency to availability and service quality. It focuses on both the design and implementation aspects of artificial intelligence approaches in smart cities and sensing applications that are enabled and supported by IoT paradigms, and mainly on data delivery approaches and their performability aspects.
Download or read book Smart Grid in IoT Enabled Spaces written by Fadi Al-Turjman and published by CRC Press. This book was released on 2020-10-05 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internet of Things (IoT)-enabled spaces have made revolutionary advances in the utility grid. Among these advances, intelligent and energy-efficient services are gaining considerable interest. The use of the smart grid is increasing day after day around us and is not only used in saving energy but also in our daily life for intelligent health, traffic, and even farming systems. The grid enabled with IoT features is also expected to communicate with cellular networks smoothly in the next-generation networks (6G and beyond). This will open the door for other interesting research areas. In this book, we consider the most significant and emergent research topics in this domain, addressing major issues and challenges in IoT-based solutions proposed for the smart grid. The chapters provide insight on comprehensive topics in IoT-based smart grids, combining technical aspects with the most up-to-date theory. It investigates the grid under varying and potential emerging paradigms such as edge/fog computing, in addition to big data aspects considerations in the IoT era. With comprehensive surveys and case studies, this book explores basic and high-level grid aspects in the emerging smart city paradigm, which makes it especially attractive to researchers, academics, and higher-level students. This authored book can be used by computer science undergraduate and postgraduate students, researchers and practitioners, city administrators, policymakers, and government regulators.
Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer. This book was released on 2019-08-02 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents selected peer-reviewed papers from the 9th International Workshop on ‘Service Oriented, Holonic and Multi-agent Manufacturing Systems for the Industry of the Future’ organized by Universitat Politècnica de València, Spain, and held on October 3–4, 2019. The SOHOMA 2019 Workshop aimed to foster innovation in the digital transformation of manufacturing and logistics by promoting new concepts and methods and solutions through service orientation in holonic and agent-based control with distributed intelligence. The book provides insights into the theme of the SOHOMA’19 Workshop – ‘Smart anything everywhere – the vertical and horizontal manufacturing integration, ’ addressing ‘Industry of the Future’ (IoF), a term used to describe the 4th industrial revolution initiated by a new generation of adaptive, fully connected, analytical and highly efficient robotized manufacturing systems. This global IoF model describes a new stage of manufacturing, that is fully automatized and uses advanced information, communication and control technologies such as industrial IoT, cyber-physical production systems, cloud manufacturing, resource virtualization, product intelligence, and digital twin, edge and fog computing. It presents the IoF interconnection of distributed manufacturing entities using a ‘system-of-systems’ approach, discussing new types of highly interconnected and self-organizing production resources in the entire value chain; and new types of intelligent decision-making support based on from real-time production data collected from resources, products and machine learning processing. This book is intended for researchers and engineers working in the manufacturing value chain, and specialists developing computer-based control and robotics solutions for the ‘Industry of the Future’. It is also a valuable resource for master’s and Ph.D. students in engineering sciences programs.
Download or read book Instrument Engineers Handbook Volume 3 written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook – Volume 3: Process Software and Digital Networks, Fourth Edition is the latest addition to an enduring collection that industrial automation (AT) professionals often refer to as the "bible." First published in 1970, the entire handbook is approximately 5,000 pages, designed as standalone volumes that cover the measurement (Volume 1), control (Volume 2), and software (Volume 3) aspects of automation. This fourth edition of the third volume provides an in-depth, state-of-the-art review of control software packages used in plant optimization, control, maintenance, and safety. Each updated volume of this renowned reference requires about ten years to prepare, so revised installments have been issued every decade, taking into account the numerous developments that occur from one publication to the next. Assessing the rapid evolution of automation and optimization in control systems used in all types of industrial plants, this book details the wired/wireless communications and software used. This includes the ever-increasing number of applications for intelligent instruments, enhanced networks, Internet use, virtual private networks, and integration of control systems with the main networks used by management, all of which operate in a linked global environment. Topics covered include: Advances in new displays, which help operators to more quickly assess and respond to plant conditions Software and networks that help monitor, control, and optimize industrial processes, to determine the efficiency, energy consumption, and profitability of operations Strategies to counteract changes in market conditions and energy and raw material costs Techniques to fortify the safety of plant operations and the security of digital communications systems This volume explores why the holistic approach to integrating process and enterprise networks is convenient and efficient, despite associated problems involving cyber and local network security, energy conservation, and other issues. It shows how firewalls must separate the business (IT) and the operation (automation technology, or AT) domains to guarantee the safe function of all industrial plants. This book illustrates how these concerns must be addressed using effective technical solutions and proper management policies and practices. Reinforcing the fact that all industrial control systems are, in general, critically interdependent, this handbook provides a wide range of software application examples from industries including: automotive, mining, renewable energy, steel, dairy, pharmaceutical, mineral processing, oil, gas, electric power, utility, and nuclear power.
Download or read book Industrial IoT written by Ismail Butun and published by Springer Nature. This book was released on 2020-07-01 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proliferation of Internet of Things (IoT) has enabled rapid enhancements for applications, not only in home and environment scenarios, but also in factory automation. Now, Industrial Internet of Things (IIoT) offers all the advantages of IoT to industry, with applications ranging from remote sensing and actuating, to de-centralization and autonomy. In this book, the editor presents the IIoT and its place during the new industrial revolution (Industry 4.0) as it takes us to a better, sustainable, automated, and safer world. The book covers the cross relations and implications of IIoT with existing wired/wireless communication/networking and safety technologies of the Industrial Networks. Moreover, the book includes practical use-case scenarios from the industry for the application of IIoT on smart factories, smart cities, and smart grids. IoT-driven advances in commercial and industrial building lighting and in street lighting are presented as an example to shed light on the application domain of IIoT. The state of the art in Industrial Automation is also presented to give a better understanding of the enabling technologies, potential advantages, and challenges of the Industry 4.0 and IIoT. Finally, yet importantly, the security section of the book covers the cyber-security related needs of the IIoT users and the services that might address these needs. User privacy, data ownership, and proprietary information handling related to IIoT networks are all investigated. Intrusion prevention, detection, and mitigation are all covered at the conclusion of the book.
Download or read book Risks and Security of Internet and Systems written by Slim Kallel and published by Springer Nature. This book was released on 2020-02-28 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the revised selected papers from the 14th International Conference on Risks and Security of Internet and Systems, CRiSIS 2019, held in Hammamet, Tunisia, in October 2019. The 20 full papers and 4 short papers presented in this volume were carefully reviewed and selected from 64 submissions. They cover diverse research themes that range from classic topics, such as risk analysis and management; access control and permission; secure embedded systems; network and cloud security; information security policy; data protection and machine learning for security; distributed detection system and blockchain.
Download or read book Advances in Automotive Production Technology Theory and Application written by Philipp Weißgraeber and published by Springer Nature. This book was released on 2021-06-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the series ARENA2036 compiles the outcomes of the first Stuttgart Conference on Automotive Production (SCAP2020). It contains peer-reviewed contributions from a theoretical as well as practical vantage point and is topically structured according to the following four sections: It discusses (I) Novel Approaches for Efficient Production and Assembly Planning, (II) Smart Production Systems and Data Services, (III) Advances in Manufacturing Processes and Materials, and (IV) New Concepts for Autonomous, Collaborative Intralogistics. Given the restrictive circumstances of 2020, the conference was held as a fully digital event divided into two parts. It opened with a pre-week, allowing everyone to peruse the scientific contributions at their own pace, followed by a two-day live event that enabled experts from the sciences and the industry to engage in various discussions. The conference has proven itself as an insightful forum that allowed for an expertly exchange regarding the pivotal Advances in Automotive Production and Technology.
Download or read book Real time Iterative Learning Control written by Jian-Xin Xu and published by Springer Science & Business Media. This book was released on 2008-12-12 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time Iterative Learning Control demonstrates how the latest advances in iterative learning control (ILC) can be applied to a number of plants widely encountered in practice. The book gives a systematic introduction to real-time ILC design and source of illustrative case studies for ILC problem solving; the fundamental concepts, schematics, configurations and generic guidelines for ILC design and implementation are enhanced by a well-selected group of representative, simple and easy-to-learn example applications. Key issues in ILC design and implementation in linear and nonlinear plants pervading mechatronics and batch processes are addressed, in particular: ILC design in the continuous- and discrete-time domains; design in the frequency and time domains; design with problem-specific performance objectives including robustness and optimality; design in a modular approach by integration with other control techniques; and design by means of classical tools based on Bode plots and state space.
Download or read book Fieldbus Technology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fieldbus Technology (FT) is an enabling platform that is becoming the preferred choice for the next generation real-time automation and control solutions. This book incorporates a selection of research and development papers. Topics covered include: history and background, contemporary standards, underlying architecture, comparison between different Fieldbus systems, applications, latest innovations, new trends as well as issues such as compatibility, interoperability, and interchangeability.
Download or read book Robot Operating System ROS written by Anis Koubaa and published by Springer. This book was released on 2017-05-25 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume is a continuation of the successful first volume of this Springer book, and as well as addressing broader topics it puts a particular focus on unmanned aerial vehicles (UAVs) with Robot Operating System (ROS). Consisting of three types of chapters: tutorials, cases studies, and research papers, it provides comprehensive additional material on ROS and the aspects of developing robotics systems, algorithms, frameworks, and applications with ROS. ROS is being increasingly integrated in almost all kinds of robots and is becoming the de-facto standard for developing applications and systems for robotics. Although the research community is actively developing applications with ROS and extending its features, amount of literature references is not representative of the huge amount of work being done. The book includes 19 chapters organized into six parts: Part 1 presents the control of UAVs with ROS, while in Part 2, three chapters deal with control of mobile robots. Part 3 provides recent work toward integrating ROS with Internet, cloud and distributed systems. Part 4 offers five case studies of service robots and field experiments. Part 5 presents signal-processing tools for perception and sensing, and lastly, Part 6 introduces advanced simulation frameworks. The diversity of topics in the book makes it a unique and valuable reference resource for ROS users, researchers, learners and developers.
Download or read book Computer Networks written by Piotr Gaj and published by . This book was released on 2017 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Networking Fundamentals written by Kaveh Pahlavan and published by John Wiley & Sons. This book was released on 2009-04-20 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the physical layer, Networking Fundamentals provides essential information on networking technologies that are used in both wired and wireless networks designed for local area networks (LANs) and wide-area networks (WANs). The book starts with an overview of telecommunications followed by four parts, each including several chapters. Part I explains the principles of design and analysis of information networks at the lowest layers. It concentrates on the characteristics of the transmission media, applied transmission and coding, and medium access control. Parts II and III are devoted to detailed descriptions of important WANs and LANs respectively with Part II describing the wired Ethernet and Internet as well as cellular networks while Part III covers popular wired LANs and wireless LANs (WLANs), as well as wireless personal area network (WPAN) technologies. Part IV concludes by examining security, localization and sensor networking. The partitioned structure of the book allows flexibility in teaching the material, encouraging the reader to grasp the more simple concepts and to build on these foundations when moving onto more complex information. Networking Fundamentals contains numerous illustrations, case studies and tables to supplement the text, as well as exercises with solutions at the end of each chapter. There is also a companion website with password protected solutions manual for instructors along with other useful resources. Provides a unique holistic approach covering wireless communication technologies, wired technologies and networking One of the first textbooks to integrate all aspects of information networks while placing an emphasis on the physical layer and systems engineering aspects Contains numerous illustrations, case studies and tables to supplement the text, as well as exercises with solutions at the end of each chapter Companion website with password protected solutions manual and other useful resources
Download or read book Automating with PROFINET written by Raimond Pigan and published by John Wiley & Sons. This book was released on 2006-06-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an introduction to PROFINET technology, this book gives engineers, technicians and students an overview of the concept and fundamentals for solving automation tasks. Technical relationships and practical applications are described using SIMATIC products as examples.
Download or read book OPC Unified Architecture written by Wolfgang Mahnke and published by Springer Science & Business Media. This book was released on 2009-04-05 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivation for This Book The OPC Foundation provides specifications for data exchange in industrial au- mation. There is a long history of COM/DCOM-based specifications, most pro- nent OPC Data Access (DA), OPC Alarms and Events (A&E), and OPC Historical Data Access (HDA), which are widely accepted in the industry and implemented by almost every system targeting industrial automation. Now the OPC Foundation has released a new generation of OPC specifications called OPC Unified Architecture (OPC UA). With OPC UA, the OPC Foundation fulfills a technology shift from the retiring COM/DCOM technology to a servi- oriented architecture providing data in a platform-independent manner via Web Services or its own optimized TCP-based protocol. OPC UA unifies the previous specifications into one single address space capable of dealing with current data, alarms and events and the history of current data as well as the event history. A remarkable enhancement of OPC UA is the Address Space Model by which v- dors can expose a rich and extensible information model using object-oriented techniques. OPC UA scales well from intelligent devices, controllers, DCS, and SCADA systems up to MES and ERP systems. It also scales well in its ability to provide information; on the lower end, a model similar to Classic OPC can be used, providing only base information, while at the upper end, highly sophisticated models can be described, providing a large amount of metadata including complex type hierarchies.
Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Nature. This book was released on 2023-06-16 with total page 1533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.
Download or read book Industrial Communication Systems written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2018-10-03 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition, Industrial Communications Systems combines traditional and newer, more specialized knowledge that helps industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Modern communication systems in factories use many different—and increasingly sophisticated—systems to send and receive information. Industrial Communication Systems spans the full gamut of concepts that engineers require to maintain a well-designed, reliable communications system that can ensure successful operation of any production process. Delving into the subject, this volume covers: Technical principles Application-specific areas Technologies Internet programming Outlook, including trends and expected challenges Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Control and Mechatronics Intelligent Systems
