Download or read book New Engine Technology for California s Combined Heat and Power Market written by Jean Roy and published by . This book was released on 2013 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2017-02-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants provides an authoritative review of steam turbine design optimization, analysis and measurement, the development of steam turbine blades, and other critical components, including turbine retrofitting and steam turbines for renewable power plants. As a very large proportion of the world's electricity is currently generated in systems driven by steam turbines, (and will most likely remain the case in the future) with steam turbines operating in fossil-fuel, cogeneration, combined cycle, integrated gasification combined cycle, geothermal, solar thermal, and nuclear plants across the world, this book provides a comprehensive assessment of the research and work that has been completed over the past decades. - Presents an in-depth review on steam turbine design optimization, analysis, and measurement - Written by a range of experts in the area - Provides an overview of turbine retrofitting and advanced applications in power generation

Download or read book Engine CHP Emission Control Technology written by Keith Davidson and published by . This book was released on 2011 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.

Download or read book Small and Micro Combined Heat and Power CHP Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines

Download or read book Harnessing Variable Renewables written by Organisation for Economic Co-operation and Development and published by Organization for Economic Co-Operation & Developme. This book was released on 2011 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power systems must be actively managed to maintain a steady balance between supply and demand. This is already a complex task as demand varies continually. But what happens when supply becomes more variable and less certain, as with some renewable sources of electricity like wind and solar PV that fluctuate with the weather? to what extent can the resources that help power systems cope with the challenge of variability in demand also be applied to variability of supply? How large are these resources? and what share of electricity supply from variable renewables can they make possible? There is no one-size-fits-all answer. the ways electricity is produced, transported and consumed around the world exhibit great diversity. Grids can cross borders, requiring co-ordinated international policy, or can be distinct within a single country or region. and whether found in dispatchable power plants, storage facilities, interconnections for trade or on the demand side, the flexible resource that ensures the provision of reliable power in the face of uncertainty likewise differs enormously. Written for decision makers, Harnessing Variable Renewables: a Guide to the Balancing Challenge sheds light on managing power systems with large shares of variable renewables. It presents a new, step-by-step approach developed by the IEA to assess the flexibility of power systems, which identifies the already present resources that could help meet the twin challenges of variability and uncertainty.

Download or read book Combined Cooling Heating and Power written by Masood Ebrahimi and published by Elsevier. This book was released on 2014-10-08 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: A professional reference title written primarily for researchers in thermal engineering, Combined Cooling, Heating and Power: Decision-Making, Design and Optimization summarizes current research on decision-making and optimization in combined cooling, heating, and power (CCHP) systems. The authors provide examples of using these decision-making tools with five examples that run throughout the book. - Offers a unique emphasis on newer techniques in decision-making - Provides examples of decision-making tools with five examples that run throughout the book

Download or read book Thermochemical Processing of Biomass written by Robert C. Brown and published by John Wiley & Sons. This book was released on 2019-05-28 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive examination of the large number of possible pathways for converting biomass into fuels and power through thermochemical processes Bringing together a widely scattered body of information into a single volume, this book provides complete coverage of the many ways that thermochemical processes are used to transform biomass into fuels, chemicals and power. Fully revised and updated, this new edition highlights the substantial progress and recent developments that have been made in this rapidly growing field since publication of the first edition and incorporates up-to-date information in each chapter. Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition incorporates two new chapters covering: condensed phased reactions of thermal deconstruction of biomass and life cycle analysis of thermochemical processing systems. It offers a new introductory chapter that provides a more comprehensive overview of thermochemical technologies. The book also features fresh perspectives from new authors covering such evolving areas as solvent liquefaction and hybrid processing. Other chapters cover combustion, gasification, fast pyrolysis, upgrading of syngas and bio-oil to liquid transportation fuels, and the economics of thermochemically producing fuels and power, and more. Features contributions by a distinguished group of European and American researchers offering a broad and unified description of thermochemical processing options for biomass Combines an overview of the current status of thermochemical biomass conversion as well as engineering aspects to appeal to the broadest audience Edited by one of Biofuels Digest’s "Top 100 People" in bioenergy for six consecutive years Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition will appeal to all academic researchers, process chemists, and engineers working in the field of biomass conversion to fuels and chemicals. It is also an excellent book for graduate and advanced undergraduate students studying biomass, biofuels, renewable resources, and energy and power generation.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1986 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1986 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Green Business written by Nevin Cohen and published by SAGE. This book was released on 2011-06-28 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Presenting 150 signed entries, this book provides an overview of key principles, approaches, strategies, and tools businesses have used to reduce environmental impacts and contribute to sustainability.

Download or read book Combined Heating Cooling Power Handbook written by Neil Petchers and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the economic road blocks which have previously served to discourage the implementation of alternative power generation technologies can now be readily overcome through effective energy resource optimization. It is now a fact that solid financial returns can be achieved from combined heating, cooling and power generation projects by integrating energy and cost efficiency goals, and seeking a match between power production and heating/cooling requirements. This book is intended to serve as a road map to those seeking to realize optimum economic returns on such projects. The first section provides an introduction to basic heat and power thermodynamics, with an overview of heat and power generation technologies and equipment. The second section explores the infrastructure in which the project must be implemented, including environmental considerations, as well as utility rate structures. The third section provides detailed coverage of a broad range of technology types, and discusses how opportunities for their application can be identified and successfully exploited. The final section takes you through each step of project development, implementation and operation. Numerous examples are provided of actual field applications, with supporting documentation of system layouts and performance. The text is supplemented with more than one thousand graphics, including photos, cutaway drawings, layout schematics, performance curves, and data tables.

Download or read book 1st World Conference on Biomass for Energy and Industry written by Spyros Kyritsis and published by Earthscan. This book was released on 2001 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st World Conference and Technology Exhibition on Biomass for Energy and Industry, held in Sevilla in June 2000, brought together for the first time the traditional European Conference on Biomass for Energy and Industry and the Biomass Conference of the Americas, thus creating the largest and most outstanding event in the worldwide biomass sector. The conference elaborated innovative global strategies, projects and efficient practice rules for energy and the environment at a key stage in the industry's development. New concepts and projects were highlighted to increase the social and political awareness for a change in worldwide resource consumption and to promote economically, socially and environmentally sustainable development for the next millennium. In 2 volumes, the Proceedings include some 470 papers essential to an understanding of current thinking, practice, research and global developments in the biomass sector - a vital reference source for researchers, manufacturers, and policy makers involved or interested in the use of biomass for energy and industry.

Download or read book Energy and Water Development Appropriations for 2006 Dept of the Army Corps of Engineers written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2005 with total page 1928 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cogeneration Fuel Cell Sorption Air Conditioning Systems written by I. Pilatowsky and published by Springer Science & Business Media. This book was released on 2011-01-28 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although conventional cogeneration systems have been used successfully in the last two decades, most of them have been large units using mainly hydrocarbon fuels that are becoming increasingly expensive. New cogeneration systems based on fuel cells and sorption air conditioning systems promise to be an energy-saving alternative for situations when cooling, heating and power are needed at low and medium capacities. Cogeneration Fuel Cell-Sorption Air Conditioning Systems examines the thermodynamic principles of fuel cell performance and sorption air conditioning systems, and gives relevant information about the state of the art of these technologies. It also provides the reader with the theoretical bases and knowledge needed to understand the operation of these new cogeneration systems, as well as discussing the design basis and economical evaluation. Topics covered include: • selected fuel cells for cogeneration CHP processes; • state-of-the-art sorption refrigeration systems; • potential applications in demonstration projects; and • profitability assessment of the cogeneration system. Air conditioning and fuel cell engineers; postgraduates and researchers in energy fields; and designers of cooling, heating and power cogeneration systems will find Cogeneration Fuel Cell-Sorption Air Conditioning Systems a useful and informative reference.

Download or read book Optimum Choice of Energy System Configuration and Storages for a Proper Match between Energy Conversion and Demands written by Andrea Lazzaretto and published by MDPI. This book was released on 2020-01-31 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue addresses the general problem of a proper match between the demands of energy users and the units for energy conversion and storage, by means of proper design and operation of the overall energy system configuration. The focus is either on systems including single plants or groups of plants, connected or not to one or more energy distribution networks. In both cases, the optimum design and operation involve decisions about thermodynamic processes, about the type, number, design parameters of components/plants, and storage capacities, and about mutual interconnections and the interconnections with the distribution grids. The problem is absolutely general, encompassing design and operation of energy systems for single houses, groups of houses, industries, industrial districts, municipal areas, regions and countries. The presented papers show that similar approaches can be used in different applications, although a general standard has not been achieved yet.

Download or read book Leading edge Electric Power Research written by Cian M. O'Sullivan and published by Nova Publishers. This book was released on 2008 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new and significant research on electric power. The world is becoming increasingly electrified. For the foreseeable future, coal will continue to be the dominant fuel used for electric power production. The low cost and abundance of coal is one of the primary reasons for this. Electric power transmission, a process in the delivery of electricity to consumers, is the bulk transfer of electrical power. Typically, power transmission is between the power plant and a substation near a populated area. Electricity distribution is the delivery from the substation to the consumers. Due to the large amount of power involved, transmission normally takes place at high voltage (110 kV or above). Electricity is usually transmitted over long distance through overhead power transmission lines. Underground power transmission is used only in densely populated areas due to its high cost of installation and maintenance, and because the high reactive power gain produces large charging currents and difficulties in voltage management. A power transmission system is sometimes referred to colloquially as a "grid"; however, for reasons of economy, the network is rarely a true grid. Redundant paths and lines are provided so that power can be routed from any power plant to any load centre, through a variety of routes, based on the economics of the transmission path and the cost of power. Much analysis is done by transmission companies to determine the maximum reliable capacity of each line, which, due to system stability considerations, may be less than the physical or thermal limit of the line. Deregulation of electricity companies in many countries has led to renewed interest in reliable economic design of transmission networks.