Download or read book Modern Developments in Heat Transfer written by Warren Ibele and published by Elsevier. This book was released on 2012-12-02 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Developments in Heat Transfer provides information pertinent to heat transfer investigation, including convective heat transfer, radiation heat transfer, as well as heat and mass transfer. This book examines the aspects and properties of high temperature heat transfer. Organized into 14 chapters, this book starts with an overview of noncircular duct heat transfer in a wide range of engineering applications from automobile radiators to nuclear power plants. This text then examines the differences between circular and noncircular duct flows. Other chapters describe energy transport by radiation wherein photons, as energy carriers, are released from molecules of the radiating body and travel on straight lines until they are scattered or absorbed by other atoms or molecules. This book discusses as well the process of evaporation, which results in the conversion of a liquid into a vapor. The final chapter deals with plasma dynamics and its features. Physicists, chemists, mathematicians, and engineers will find this book extremely useful.
Download or read book Advances in Heat Exchangers written by Laura Castro Gómez and published by BoD – Books on Demand. This book was released on 2019-02-20 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are important devices for engineering, research, and industry. Because of this, any improvement helps to optimize the whole process. Opportunity areas may be found in design, materials, or working fluids. In this sense, the present book compiles some advances in the matter of design (three chapters) and working fluids (one chapter). An introductory chapter also is presented.
Download or read book Recent Developments in Compact High Duty Heat Exchangers written by Institution of Mechanical Engineers (Great Britain). Thermodynamics and Fluid Mechanics Group and published by . This book was released on 1973 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Operation of Heat Exchangers and their Networks written by Wilfried Roetzel and published by Academic Press. This book was released on 2019-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of heat Exchangers and Their Networks presents a comprehensive and detailed analysis on the thermal design methods for the most common types of heat exchangers, with a focus on their networks, simulation procedures for their operations, and measurement of their thermal performances. The book addresses the fundamental theories and principles of heat transfer performance of heat exchangers and their applications and then applies them to the use of modern computing technology. Topics discussed include cell methods for condensers and evaporators, dispersion models for heat exchangers, experimental methods for the evaluation of heat exchanger performance, and thermal calculation algorithms for multi-stream heat exchangers and heat exchanger networks. - Includes MATLAB codes to illustrate how the technologies and methods discussed can be easily applied and developed - Analyses a range of different models, applications, and case studies in order to reveal more advanced solutions for industrial applications - Maintains a strong focus on the fundamental theories and principles of the heat transfer performance of heat exchangers and their applications for complex flow arrangement
Download or read book Innovative Heat Exchanger Technologies Developments and Applications written by Peixin Dong and published by BoD – Books on Demand. This book was released on 2024-08-21 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the latest technological advancements in heat exchangers, providing valuable insights for researchers, engineers, and students in related fields. It investigates the latest developments and practical applications across various sectors, depicting both foundational concepts and emerging trends. The book is structured into three sections: “Phase-Change Material (PCM) Heat Exchangers”, “Modeling Methodologies”, and “Material Thermodynamics”. In Section 1, two chapters explore the principles and applications of PCMs, focusing on their role in enhancing thermal management and energy storage. In Section 2, three chapters provide an extensive review of the evolution of different heat exchanger designs and modeling methodologies, highlighting innovation-aided performance improvements. In Section 3, the final chapter investigates the practical aspects of heat transfer in thermal materials, emphasizing optimization techniques and real-world applications. Edited by Peixin Dong, a recognized expert from Hong Kong ITF-Talent Hub 2024, and Xin Sui, a senior researcher/engineer, this book serves as an essential resource for anyone involved in studying and utilizing heat exchanger technologies. Whether you are looking to understand the latest research, explore new design methodologies, or apply advanced heat transfer techniques, this volume offers the insights and knowledge required to stay at the forefront of the field. Innovative Heat Exchanger Technologies, Developments and Applications is your gateway to understanding the future of heat exchanger technology and its impact on diverse industries.
Download or read book Fundamentals of Heat Exchanger Design written by Dusan P. Sekulic and published by John Wiley & Sons. This book was released on 2023-12-07 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Heat Exchanger Design, Second Edition builds upon the widely-used First Edition, a text often considered to be the most prominent single-volume heat exchanger text on the market. The new and improved Second Edition serves as an equally comprehensive resource, updated to suit the latest technologies and design methods being used in the Heat Exchanger field. Written by First-Edition author Dusan P. Sekulic, this text addresses the latest developments in the industry, including a brand-new chapter on the manufacturing of compact heat exchangers. After opening with a basic introduction to heat exchanger types and design methods, the book goes on to cover more specialized topics such as such as the design of recuperators and regenerators, pressure drop analysis, geometric properties, flow friction, fouling and corrosion, and more. With many significant revisions throughout, this new edition offers more streamlined content while maintaining the consistent, detailed coverage of the fundamentals of the topic that readers appreciated in the First Edition. These unique features position the Second Edition of Fundamentals of Heat Exchanger Design as the ideal text for both engineering professionals and advanced students alike.
Download or read book Advances in Thermal Design of Heat Exchangers written by Eric M. Smith and published by . This book was released on 2005 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective in any engineering design process has to be the elimination of uncertainties. In thermal design of heat exchangers there are presently many stages in which assumptions in mathematical solution of the design problem are being made. Accumulation of these assumptions may introduce variations in design. The designer needs to understand where these inaccuracies may arise, and strive to eliminate as many sources of error as possible by choosing design configurations that avoid such problems at source. In this exciting text, the author adopts a numerical approach to the thermal design of heat exchangers, extending the theory of performance evaluation to the point where computer software may be written. The first few chapters are intended to provide a development from undergraduate studies regarding the fundamentals of heat exchanger theory and the concepts of direct sizing. Later chapters on transient response of heat exchangers and on the related single-blow method of obtaining experimental results should also interest the practicing engineer. Theory is explained simply, with the intention that readers can develop their own approach to the solution of particular problems. This book is an indispensable reference text for higher level (post-graduate) students and practicing engineers, researchers and academics in the field of heat exchangers. Includes a whole new chapter on exergy and pressure loss Provides in the first few chapters a development from undergraduate studies regarding the fundamentals of heat exchanger theory, and continues in later chapters to discuss issues such as the transient response of heat exchangers and the related single-blow method of obtaining experimental results that are also of interest to the practicing engineer. Adopts a numerical approach to the thermal design of heat exchangers, extending the theory of performance evaluation to the point where computer software may be written Contributes to the development of the direct ‘sizing’ approach in thermal design of the exchanger surface Explains theory simply, with the objective that the reader can develop their own approach to the solution of particular problems
Download or read book New Developments in Heat Exchangers written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plate Heat Exchangers written by Bengt Sundén and published by WIT Press. This book was released on 2007 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate-and-frame heat exchangers (PHEs) are used in many different processes at a broad range of temperatures and with a variety of substances. Research into PHEs has increased considerably in recent years and this is a compilation of knowledge on the subject. Containing invited contributions from prominent and active investigators in the area, it should enable graduate students, researchers, and research and development engineers in industry to achieve a better understanding of transport processes. Some guidelines for design and development are also included.
Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.
Download or read book Compact Heat Exchangers for Energy Transfer Intensification written by Jiri Jaromir Klemes and published by CRC Press. This book was released on 2015-12-16 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers for Energy Transfer Intensification: Low-Grade Heat and Fouling Mitigation provides theoretical and experimental background on heat transfer intensification in modern heat exchangers. Emphasizing applications in complex heat recovery systems for the process industries, this book:Covers various issues related to low-grade hea
Download or read book Developments in Heat Transfer written by Warren M. Rohsenow and published by MIT Press (MA). This book was released on 1964 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Developments in Heat Exchangers written by N Afgan and published by CRC Press. This book was released on 1996-12-03 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines recent research results on integrated intelligent systems for engineering design based on distributed artificial intelligence (DAI), computer-integrated manufacturing systems (CIMS), and intelligent computer-aided design systems (ICAD). Presents both theory fundamentals and implementation technology, as well as industrial applications. Introduces a new problem-solving strategy for engineering design and its implementation based on integrated distributed artificial intelligence technology in detail. Explores six application case studies, including missile system design, mechanical transmission design, process control system design, and chemical process design.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. - Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. - Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. - Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.
Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2012-03-01 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air conditioning and refrigeration systems. Revised and updated with new problem sets and examples, Heat Exchangers: Selection, Rating, and Thermal Design, Third Edition presents a systematic treatment of the various types of heat exchangers, focusing on selection, thermal-hydraulic design, and rating. Topics discussed include: Classification of heat exchangers according to different criteria Basic design methods for sizing and rating of heat exchangers Single-phase forced convection correlations in channels Pressure drop and pumping power for heat exchangers and their piping circuit Design solutions for heat exchangers subject to fouling Double-pipe heat exchanger design methods Correlations for the design of two-phase flow heat exchangers Thermal design methods and processes for shell-and-tube, compact, and gasketed-plate heat exchangers Thermal design of condensers and evaporators This third edition contains two new chapters. Micro/Nano Heat Transfer explores the thermal design fundamentals for microscale heat exchangers and the enhancement heat transfer for applications to heat exchanger design with nanofluids. It also examines single-phase forced convection correlations as well as flow friction factors for microchannel flows for heat transfer and pumping power calculations. Polymer Heat Exchangers introduces an alternative design option for applications hindered by the operating limitations of metallic heat exchangers. The appendices provide the thermophysical properties of various fluids. Each chapter contains examples illustrating thermal design methods and procedures and relevant nomenclature. End-of-chapter problems enable students to test their assimilation of the material.
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
