Download or read book New Concepts and Practices in Activated Sludge Process Control written by Robert M. Arthur and published by Butterworth-Heinemann. This book was released on 1982 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Concepts and Practices in Activated Sludge Process Control written by Arthur RM. and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Sludge written by N. F. Gray and published by Oxford University Press, USA. This book was released on 1990 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated sludge is the most widely used biological wastewater treatment process in the world, both for domestic and industrial purposes. This book reviews the major theoretical concepts and practical operational factors, and describes the complexities inherent in the process, which depends on a dense microbial population mixed in wastewater under specific aerobic conditions. It is an ideal reference source for scientists, and a useful troubleshooting guide for practicing engineers and plant operators.

Download or read book Procedures and Practices in Activated Sludge Process Control written by Robert M. Arthur and published by Butterworth-Heinemann. This book was released on 1983 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Sludge and Nutrient Removal written by Water Environment Federation and published by Manual of Practice. This book was released on 2017-08-09 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Nutrient Removal guides you through selecting an appropriate sludge age, calculating wasting rates, optimizing return activated sludge flow, managing clarifier blankets, and setting DO and ORP set points.

Download or read book Activated Sludge written by Wesley Eckenfelder and published by CRC Press. This book was released on 1998-08-04 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Process Theory Kinetics and Sludge Quality Control: Activated Sludge Process - Process Theory - Activated Sludge Separation Problems - References Activated Sludge Treatment of Municipal Wastewater U.S.A. Practice: General Approach - Clarifier Design - Aeration Tank (Reactor) Design - Appurtenance Design - Configurations - ReferencesEurope

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Process Control of Activated Sludge Plants by Microscopic Investigation written by Dick H. Eikelboom and published by IWA Publishing. This book was released on 2000-06-30 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is only available as a free copy to download from the WaterWiki. To download your free copy of the eBook, click here. The manual can be used independantly but when used in combination with the CD-ROM, it makes a unique tool for process operators to diagnose and solve operational problems. It is also a valuable educational and training package for universities and post experience courses. Click here for more details about the CD-ROM Process stability and final effluent quality largely depend upon the composition of the biomass in an activated sludge plant. Operational problems such as bulking and scum formation occur when the wrong micro-organisms are dominating the sludge population. Microscopic sludge investigation is therefore essential for process control and stable plant operation. The manual outlines the theoretical framework, extensively illustrated with full-colour micrographs. Contents Microscopy Microscopic sludge investigation Characteristics of activated sludge flocs Filamentous micro-organisms Protozoa and metazoa Conclusions of microscopic sludge investigation The activated sludge process Operational problems Bulking sludge Scum formation

Download or read book Activated Sludge written by Tim Hobson and published by . This book was released on 2009-12-08 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the book's introduction: This is not an introductory text about activated sludge. In this book, we discuss the observation, testing, and calculation procedures that provide data about the status of the activated sludge process. In addition, we discuss in depth how to apply this data to the business of controlling your activated sludge treatment process. Basic activated sludge concepts are addressed in this book in the context of process evaluation and control. We focus our efforts on discussing a basic, practical system of control for the process. The procedures discussed in this manual are equally applicable to all variations. An operator must have information about settleability, dissolved oxygen concentration, solids concentration, effluent quality, and clarifier sludge levels for consistent, efficient process performance of every type of activated sludge process. These procedures are covered in detail. The procedures discussed are based on work done by E. B. Mallory in the 1930's and 40's and further developed by Alfred W. West while he was head of the Operational Technology Branch of the Environmental Protection Agency in the 1960's and 70's. The system, with some modifications by this author, is frequently called the "West Method" or "Sludge Quality Method" of activated sludge process control because operational controls adjustments are based on the sludge quality existing in your facility rather than on arbitrary values.

Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

Download or read book Activated Sludge Process Design and Control written by William Wesley Eckenfelder and published by . This book was released on 1992 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biological Concepts for Design and Operation of the Activated Sludge Process written by Anthony F. Gaudy and published by . This book was released on 1972 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade, research has been conducted to produce a general body of conceptual principles applicable to design and operation of activated sludge processes. The aid of the report is to present these biological concepts in terms readily understood by engineering professionals. Generalized concepts of BOD exertion, the use of the measure of biologically available organic matter in a waste sample as a design and operational tool, the stoichiometry and mass balance concepts of treatment, and kinetic equations for microbial growth are presented. Design models are discussed, and a model for completely mixed reactors holding recycle solids, X(R), constant is recommended. Some guidelines for accommodation of various types of shock loadings are included. Concepts of oxidative assimilation and the multiple effects of solids concentration, nitrogen concentration, and detention time are related; a new activated sludge process (continuous oxidative assimilation) for nitrogen-deficient wastes is presented. Data supporting the concept of total oxidation are presented. Some possible flow diagrams for complete aerobic treatment (purification and sludge disposal) of metabolizable organic wastes are presented.

Download or read book Activated Sludge Separation Problems written by Valter Tandoi and published by IWA Publishing. This book was released on 2017-09-15 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge Separation Problems: Theory, Control Measures, Practical Experiences, Second Edition, describes the most common activated sludge separation problems and explains the main reasons for the growth of the different filamentous microorganisms in activated sludge. The book summarizes the identification techniques for important groups of activated sludge microorganisms both based on conventional microscopic analysis and using the biological molecular tools available today (FISH and PCR). This new edition, with 70% new and updated material, also provides explanation of basic activated sludge process principles and of parameters necessary for process control and operation. The theory of secondary clarifies is described to the extent necessary for understanding the construction and operation of secondary clarifiers. The activated sludge reactor and secondary clarifies are treated as one system and the interactions are explained. The wide range of experiences around the world is documented and the methods to avoid the proliferation of these organisms are presented and critically reviewed. Activated Sludge Separation Problems consists of six chapters, presenting up-to-date technical and scientific aspects of these processes. The new edition also features an extended list of literature references for further reading. The book will be a valuable help for students of environmental engineering, wastewater specialists, plant operators and designers of activated sludge plants. It is also useful for specialists in wastewater operation laboratories, especially for those studying activated sludge separation properties.

Download or read book Activated Sludge and Aerobic Biofilm Reactors written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Activated Sludge Developments And Sustainable Solutions written by Nicholas F Gray and published by World Scientific. This book was released on 2023-02-27 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated sludge is the most widely used biological wastewater treatment process globally to date, although its high energy demand makes it a major contributor of greenhouse gas emissions. Over recent decades it has been constantly modified and retrofitted to treat ever higher loads or improve effluent standards which have often resulted in even greater carbon emissions. Conventional activated sludge treatment is at a crossroads where new sustainable solutions are required if we are to protect the quality of our rivers and meet net-zero carbon targets.The book details current operation and design with special emphasis on the biological aspects of the process. From the microbial kinetics to the fascinating process of floc formation and development, the book explores the development of our understanding of the process looking at new sustainable designs, including biological nutrient removal and new aeration systems. Sludge separation problems and control options are explained, with a trouble-shooting guide to non-bulking problems. Environmental issues including noise, odor, aerosols, micro-plastics and nanoparticles are all reviewed, as is pathogen removal and the problem of antibiotic resistant genes and bacteria. The development of membrane bioreactors has increased process reliability and effluent quality, while integrated fixed-film activated sludge processes are more efficient and compact. The book concludes by exploring how activated sludge can become more sustainable, for example, by carbon harvesting and byproduct recovery.This interdisciplinary book is essential reading for both engineers and scientists whether training at university or practitioners and consultants in the wastewater industry.Related Link(s)

Download or read book Application of On line Analytical Instrumentation to Process Control written by Robert M. Arthur and published by Butterworth-Heinemann. This book was released on 1982 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Sludge Technologies for Treating Industrial Wastewaters written by W. Wesley Eckenfelder and published by DEStech Publications, Inc. This book was released on 2013-09-30 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical information for using activated sludge to treat effluents from multiple industries Covers virtually all traditional and advanced methods, as well as treatability and process modeling New methods for removing U.S. and European regulated microconstituents, trace organics, active pharmaceutical ingredients and other contaminants Explains advances in water reuse and plant retrofitting Useful for in-house training This comprehensive book presents critical information on the applications of activated sludge for treating industrial wastewaters, as well as other effluents that impact POTWs. The book offers details on how advances in activated sludge can be deployed to meet more stringent discharge limits by explaining many novel variations of activated sludge and offering technical guidance on process modeling and optimization. Special attention is given to emerging contaminants and water reuse strategies. Case studies are drawn from the pharma, food and shale gas industries. Based on short courses taught by the authors, as well as hundreds of hours of in-plant consulting, this book offers the tools to understand and modify the activated sludge process for superior and sustainable wastewater treatment. From the Authors' Preface: "After speaking with practitioners, operators and engineers, the authors felt a new text was needed...to cover the following developments: "the continued evolution of the activated sludge process and its numerous designs, configurations and technology developments; "design of industrial water reuse systems...to achieve industry sustainability goals; "changes...from BOD, TSS and nutrient removal to removal of specific organics, toxicity...microconstituents, and more stringent effluent permit limits; "advances in process modeling tools that can be used in combination with treatability testing tools for plant design, optimization and troubleshooting; "concerns over industrial wastewater discharge impacts to POTWs, such as nitrification inhibition, the impact of frac water...and the fate of microconstituents through POTWs."