Download or read book New Approaches of Geotechnical Engineering Soil Characterization Sustainable Materials and Numerical Simulation written by Jinwoo An and published by Springer Nature. This book was released on 2021-07-10 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The studies presented in this volume cover new approaches of geotechnical engineering introduced by researchers, engineers and scientists to address contemporary issues in geotechnical engineering such as the usage of sustainable materials in soil, soil characterization with new methods, and numerical simulations to predict material properties, etc. Studies were selected from the 6th GeoChina International Conference on Civil & Transportation Infrastructures: From Engineering to Smart & Green Life Cycle Solutions -- Nanchang, China, 2021.

Download or read book Advances in Numerical Methods in Geotechnical Engineering written by Hany Shehata and published by Springer. This book was released on 2018-10-27 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with numerical simulation of coupled problems in soil mechanics and foundations. It contains analysis of both shallow and deep foundations. Several nonlinear problems are considered including, soil plasticity, cracking, reaching the soil bearing capacity, creep, etc. Dynamic analyses together with stability analysis are also included. Several numerical models of dams are considered together with coupled problems in soil mechanics and foundations. It gives wide range of modeling soil in different parts of the world. The volume is based on the best contributions to the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The official international congress of the Soil-Structure Interaction Group in Egypt (SSIGE).

Download or read book New Developments in Soil Characterization and Soil Stability written by Wissem Frikha and published by Springer. This book was released on 2018-07-18 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new studies dealing with the attempts made by the scientists and practitioners to address contemporary issues in geotechnical engineering such as characterization of soil, geomaterials, soil stability and some other geomechanics issues that are becoming quite relevant in today's world. Papers were selected from the 5th GeoChina International Conference on Civil Infrastructures Confronting Severe Weathers and Climate Changes: From Failure to Sustainability, held on July 23-25, 2018 in HangZhou, China.

Download or read book Advances in Numerical Methods in Geotechnical Engineering written by Hany Farouk Shehata and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with numerical simulation of coupled problems in soil mechanics and foundations. It contains analysis of both shallow and deep foundations. Several nonlinear problems are considered including, soil plasticity, cracking, reaching the soil bearing capacity, creep, etc. Dynamic analyses together with stability analysis are also included. Several numerical models of dams are considered together with coupled problems in soil mechanics and foundations. It gives wide range of modeling soil in different parts of the world. The volume is based on the best contributions to the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The official international congress of the Soil-Structure Interaction Group in Egypt (SSIGE).

Download or read book Recent Developments of Soil Mechanics and Geotechnics in Theory and Practice written by Theodoros Triantafyllidis and published by Springer Nature. This book was released on 2019-08-20 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential insights into recent developments in fundamental geotechnical engineering research. Special emphasis is given to a new family of constitutive soil description methods, which take into account the recent loading history and the dilatancy effects. Particular attention is also paid to the numerical implementation of multi-phase material under dynamic loads, and to geotechnical installation processes. In turn, the book addresses implementation problems concerning large deformations in soils during piling operations or densification processes, and discusses the limitations of the respective methods. Numerical simulations of dynamic consolidation processes are presented in slope stability analysis under seismic excitation. Lastly, achieving the energy transition from conventional to renewable sources will call for geotechnical expertise. Consequently, the book explores and analyzes a selection of interesting problems involving the stability and serviceability of supporting structures, and provides new solutions approaches for practitioners and scientists in geotechnical engineering. The content reflects the outcomes of the Colloquium on Geotechnical Engineering 2019 (Geotechnik Kolloquium), held in Karlsruhe, Germany in September 2019.

Download or read book Modeling in Geotechnical Engineering written by Pijush Samui and published by Academic Press. This book was released on 2020-12-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling in Geotechnical Engineering is a one stop reference for a range of computational models, the theory explaining how they work, and case studies describing how to apply them. Drawing on the expertise of contributors from a range of disciplines including geomechanics, optimization, and computational engineering, this book provides an interdisciplinary guide to this subject which is suitable for readers from a range of backgrounds. Before tackling the computational approaches, a theoretical understanding of the physical systems is provided that helps readers to fully grasp the significance of the numerical methods. The various models are presented in detail, and advice is provided on how to select the correct model for your application. Provides detailed descriptions of different computational modelling methods for geotechnical applications, including the finite element method, the finite difference method, and the boundary element method Gives readers the latest advice on the use of big data analytics and artificial intelligence in geotechnical engineering Includes case studies to help readers apply the methods described in their own work

Download or read book New Solutions for Challenges in Applications of New Materials and Geotechnical Issues written by Shuying Wang and published by Springer. This book was released on 2018-07-11 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book include research studies which deal with the attempts to address new solutions for challenges in geotechnical engineering such as characterization of new materials, application of glass fibre, geotextile fabric and permeable concrete, new numerical methods for traditional problems and some other geotechnical issues that are becoming quite relevant in today's world. The book adds to the geotechnical engineering field which still bears lots of big challenges. It contributes to make the civil infrastructures more sustainable using new technologies and materials that have been proposed and applied in various fields. Papers were selected from the 5th GeoChina International Conference 2018 – Civil Infrastructures Confronting Severe Weathers and Climate Changes: From Failure to Sustainability, held on July 23 to 25, 2018 in HangZhou, China.

Download or read book Advanced Numerical Methods in Foundation Engineering written by Hany Shehata and published by Springer Nature. This book was released on 2019-11-01 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the advanced analysis of the shallow foundations. Several research studies are considered including soil plasticity, cracking, reaching the soil bearing capacity, and creep. Dynamic analyses together with stability analysis are also included. It gives a wide range of dealing with the shallow foundations in different parts of the world.

Download or read book Geotechnical Characterization and Modelling written by Madhavi Latha Gali and published by Springer Nature. This book was released on 2020-09-18 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented during the Indian Geotechnical Conference 2018, discussing issues and challenges relating to the characterization of geomaterials, modelling approaches, and geotechnical engineering education. With a combination of field studies, laboratory experiments and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will be of interest to researchers and practitioners alike.

Download or read book Holistic Simulation of Geotechnical Installation Processes written by Theodoros Triantafyllidis and published by Springer. This book was released on 2017-01-25 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent developments and improvements in the modeling as well as application examples and is a complementary work to the previous Lecture Notes Vols. 77 and 80. It summarizes the fundamental work from scientists dealing with the development of constitutive models for soils, especially cyclic loading with special attention to the numerical implementation. In this volume the neo-hypoplasticity and the ISA (intergranular strain anisotropy) model in their extended version are presented. Furthermore, new contact elements with non-linear constitutive material laws and examples for their applications are given.Comparisons between the experimental and the numerical results show the effectiveness and the drawbacks and provide a useful and comprehensive pool for all the constitutive model developers and scientists in geotechnical engineering, who like to prove the soundness of new approaches.

Download or read book Advances in Characterization and Analysis of Expansive Soils and Rocks written by Laureano R. Hoyos and published by Springer. This book was released on 2017-07-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes a collection of technical papers covering two important research topics in geotechnical engineering: (1) the behavior and treatment of expansive soils, and (2) the characterization of rock properties. The twelve studies on expansive soils include investigations into novel stabilization techniques for expansive soils using different admixtures or mechanical consolidation techniques, as well as new experimental approaches to evaluate the behavior of expansive soils. They also include an evaluation of wetting boundary conditions on the volume change of expansive soils, as well as the role of hydrologic boundary conditions in arid climates. The four studies on rock properties include thermo-hydro-mechanical behavior of gypsum rock, role of rock strength in blastability, indirect methods to estimate rock strength, and variations in isotope distributions in Permian rocks. The two broad themes in this collection, as summarized above, are representative of local challenges facing geotechnical engineers in the Middle East, but their contributions can also be extended to other regions of the world. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.

Download or read book Recent Developments of Soil Mechanics and Geotechnics in Theory and Practice written by and published by . This book was released on 2020 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential insights into recent developments in fundamental geotechnical engineering research. Special emphasis is given to a new family of constitutive soil description methods, which take into account the recent loading history and the dilatancy effects. Particular attention is also paid to the numerical implementation of multi-phase material under dynamic loads, and to geotechnical installation processes. In turn, the book addresses implementation problems concerning large deformations in soils during piling operations or densification processes, and discusses the limitations of the respective methods. Numerical simulations of dynamic consolidation processes are presented in slope stability analysis under seismic excitation. Lastly, achieving the energy transition from conventional to renewable sources will call for geotechnical expertise. Consequently, the book explores and analyzes a selection of interesting problems involving the stability and serviceability of supporting structures, and provides new solutions approaches for practitioners and scientists in geotechnical engineering. The content reflects the outcomes of the Colloquium on Geotechnical Engineering 2019 (Geotechnik Kolloquium), held in Karlsruhe, Germany in September 2019.

Download or read book Advanced Geotechnical Engineering written by Chandrakant S. Desai and published by CRC Press. This book was released on 2013-11-27 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil-structure interaction is an area of major importance in geotechnical engineering and geomechanics Advanced Geotechnical Engineering: Soil-Structure Interaction using Computer and Material Models covers computer and analytical methods for a number of geotechnical problems. It introduces the main factors important to the application of computer methods and constitutive models with emphasis on the behavior of soils, rocks, interfaces, and joints, vital for reliable and accurate solutions. This book presents finite element (FE), finite difference (FD), and analytical methods and their applications by using computers, in conjunction with the use of appropriate constitutive models; they can provide realistic solutions for soil–structure problems. A part of this book is devoted to solving practical problems using hand calculations in addition to the use of computer methods. The book also introduces commercial computer codes as well as computer codes developed by the authors. Uses simplified constitutive models such as linear and nonlinear elastic for resistance-displacement response in 1-D problems Uses advanced constitutive models such as elasticplastic, continued yield plasticity and DSC for microstructural changes leading to microcracking, failure and liquefaction Delves into the FE and FD methods for problems that are idealized as two-dimensional (2-D) and three-dimensional (3-D) Covers the application for 3-D FE methods and an approximate procedure called multicomponent methods Includes the application to a number of problems such as dams , slopes, piles, retaining (reinforced earth) structures, tunnels, pavements, seepage, consolidation, involving field measurements, shake table, and centrifuge tests Discusses the effect of interface response on the behavior of geotechnical systems and liquefaction (considered as a microstructural instability) This text is useful to practitioners, students, teachers, and researchers who have backgrounds in geotechnical, structural engineering, and basic mechanics courses.

Download or read book Technology and Practice in Geotechnical Engineering written by Adeyeri, Joseph B. and published by IGI Global. This book was released on 2014-09-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge surrounding the behavior of earth materials is important to a number of industries, including the mining and construction industries. Further research into the field of geotechnical engineering can assist in providing the tools necessary to analyze the condition and properties of the earth. Technology and Practice in Geotechnical Engineering brings together theory and practical application, thus offering a unified and thorough understanding of soil mechanics. Highlighting illustrative examples, technological applications, and theoretical and foundational concepts, this book is a crucial reference source for students, practitioners, contractors, architects, and builders interested in the functions and mechanics of sedimentary materials.

Download or read book Ground Characterization and Foundations written by C. N. V. Satyanarayana Reddy and published by Springer Nature. This book was released on 2021-09-26 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the Indian Geotechnical Conference (IGC) 2020. The contents focus on recent developments in geotechnical engineering for a sustainable tomorrow. The book covers the topics related to traditional and latest methods in characterisation of ground at construction sites, recent technological developments/ advances in design of shallow and deep foundations in different subsoil conditions.

Download or read book Numerical Methods and Implementation in Geotechnical Engineering Part 2 written by Y.M. Cheng and published by Bentham Science Publishers. This book was released on 2020-04-20 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Implementation in Geotechnical Engineering explains several numerical methods that are used in geotechnical engineering. The second part of this reference set includes more information on the distinct element method, geotechnical optimization analysis and reliability analysis. Information about relevant additional numerical methods is also provided in each chapter with problems where applicable. The authors have also presented different computer programs associated with the materials in this book set which will be useful to students learning how to apply the models explained in the text into practical situations when designing structures in locations with specific soil and rock settings. This reference book set is a suitable textbook primer for civil engineering students as it provides a basic introduction to different numerical methods (classical and modern) in comprehensive readable volumes.

Download or read book Advances in Machinery Materials Science and Engineering Application IX written by M. Chen and published by IOS Press. This book was released on 2023-11-14 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: New engineering materials, techniques and applications are constantly being researched and developed, and keeping up to speed with the latest advances is crucial for engineers if they are to successfully address the challenges they face in their work. This book presents the selected proceedings of MMSE2023, the 9th International Conference on Advances in Machinery, Materials Science and Engineering Applications, jointly organized by the SAE-Supmeca, France and China University of Geosciences (Wuhan) and held on 22 and 23 July 2023 in Wuhan, China. For the past 12 years, this annual conference has collated recent advances and experiences, identified emerging trends and provided a platform for participants from academia and industry to exchange information and views, helping to address the world’s machinery and engineering challenges. The book contains 4 sections: mechanical engineering, material science and manufacturing technology; electrical engineering, automation and control; modeling, simulation and optimization techniques in engineering; and advanced engineering technologies and applications. A total of 241 submissions were received for MMSE2023, of which 151 papers were selected for the conference and for publication by means of a rigorous international peer-review process. These papers present exciting ideas and methods that will open novel research directions for different communities. Offering a current overview of the latest research and applications in machinery and materials-science engineering, the book will be of interest to all those working in the field.