Download or read book Neutronics of Advanced Nuclear Systems written by Yican Wu and published by Springer. This book was released on 2019-03-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive introduction to the neutronics of advanced nuclear systems, covering all key aspects, from the fundamental theories and methodologies to a wide range of advanced nuclear system designs and experiments. It is the first-ever book focusing on the neutronics of advanced nuclear systems in the world. Compared with traditional nuclear systems, advanced nuclear systems are characterized by more complex geometry and nuclear physics, and pose new challenges in terms of neutronics. Based on the achievements and experiences of the author and his team over the past few decades, the book focuses on the neutronics characteristics of advanced nuclear systems and introduces novel neutron transport methodologies for complex systems, high-fidelity calculation software for nuclear design and safety evaluation, and high-intensity neutron source and technologies for neutronics experiments. At the same time, it describes the development of various neutronics designs for advanced nuclear systems, including neutronics design for ITER, CLEAR and FDS series reactors. The book not only summarizes the progress and achievements of the author’s research work, but also highlights the latest advances and investigates the forefront of the field and the road ahead.
Download or read book Neutronics Methods for Transient and Safety Analysis of Fast Reactors written by Marchetti, Marco and published by KIT Scientific Publishing. This book was released on 2017-03-02 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Neutronics written by Yican Wu and published by Springer. This book was released on 2017-08-16 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive introduction to fusion neutronics, covering all key topics from the fundamental theories and methodologies, as well as a wide range of fusion system designs and experiments. It is the first-ever book focusing on the subject of fusion neutronics research. Compared with other nuclear devices such as fission reactors and accelerators, fusion systems are normally characterized by their complex geometry and nuclear physics, which entail new challenges for neutronics such as complicated modeling, deep penetration, low simulation efficiency, multi-physics coupling, etc. The book focuses on the neutronic characteristics of fusion systems and introduces a series of theories and methodologies that were developed to address the challenges of fusion neutronics. Further, it introduces readers to the unique principles and procedures of neutronics design, experimental methodologies and methodologies for fusion systems. The book not only highlights the latest advances and trends in the field, but also draws on the experiences and skills collected in the author’s more than 40 years of research. To make it more accessible and enhance its practical value, various representative examples are included to illustrate the application and efficiency of the methods, designs and experimental techniques discussed.
Download or read book Neutronics written by Jean-François Parisot and published by . This book was released on 2015 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Neutronics (or neutron physics) is the study of neutrins travelling through matter, of conditions for a chain reaction, and of changes in matter's composition due to nuclear reactions. It makes it possible to design and operate nuclear reactors and fuel cycle facilities."--Publisher.
Download or read book Elementary Neutronics Considerations in LMFBR Design written by G. H. Golden and published by . This book was released on 1969 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multivariable Optimization of Fusion Reactor Blankets written by Wayne Raymond Meier and published by . This book was released on 1984 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The optimization problem consists of four key elements: a figure of merit for the reactor, a technique for estimating the neutronic performance of the blanket as a function of the design variables, constraints on the design variables and neutronic performance, and a method for optimizing the figure of merit subject to the constraints. The first reactor concept investigated uses a liquid lithium blanket for breeding tritium and a steel blanket to increase the fusion energy multiplication factor. The capital cost per unit of net electric power produced is minimized subject to constraints on the tritium breeding ratio and radiation damage rate. The optimal design has a 91-cm-thick lithium blanket denatured to 0.1% 6Li. The second reactor concept investigated uses a BeO neutron multiplier and a LiAlO2 breeding blanket. The total blanket thickness is minimized subject to constraints on the tritium breeding ratio, the total neutron leakage, and the heat generation rate in aluminum support tendons. The optimal design consists of a 4.2-cm-thick BeO multiplier and 42-cm-thick LiAlO2 breeding blanket enriched to 34% 6Li.
Download or read book Status of Molten Salt Reactor Technology written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-11-27 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to assist individuals in academia and industry and in relevant regulatory and policy roles, this publication provides a summary of the current knowledge on the status of research, technological developments, reactor designs and experiments in the area of advanced reactors that are fueled or cooled by a molten salt. Identification of challenges and areas where research and development are still required in preparation for commercial deployment gives context to current and planned work. The aim of this publication is to share information on programs and projects on molten salt reactors in Member States which will shape future collaborative efforts.
Download or read book Nuclear Safety written by and published by . This book was released on 1996-04 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neutronic Analysis For Nuclear Reactor Systems written by Bahman Zohuri and published by Springer. This book was released on 2019-02-09 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expanded new edition develops the theory of nuclear reactors from the fundamentals of fission to the operating characteristics of modern reactors. The first half of the book emphasizes reactor criticality analysis and all of the fundamentals that go into modern calculations. Simplified one group diffusion theory models are presented and extended into sophisticated multi-group transport theory models. The second half of the book deals with the two main topics of interest related to operating reactors – reactor kinetics/dynamics, and in-core fuel management. Additional chapters have been added to expand and bring the material up-to-date and include the utilization of more computer codes. Code models and detailed data sets are provided along with example problems making this a useful text for students and researchers wishing to develop an understanding of nuclear power and its implementation in today’s modern energy spectrum. Covers the fundamentals of neutronic analysis for nuclear reactor systems to help understand nuclear reactor theory; Describes the benefits, uses, safety features, and challenges related to implementation of Small Modular Reactors; Provides examples, data sets, and code to assist the reader in obtaining mastery over the subjects.
Download or read book Modelling of Nuclear Reactor Multi physics written by Christophe Demazière and published by Academic Press. This book was released on 2019-11-19 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling of Nuclear Reactor Multiphysics: From Local Balance Equations to Macroscopic Models in Neutronics and Thermal-Hydraulics is an accessible guide to the advanced methods used to model nuclear reactor systems. The book addresses the frontier discipline of neutronic/thermal-hydraulic modelling of nuclear reactor cores, presenting the main techniques in a generic manner and for practical reactor calculations.The modelling of nuclear reactor systems is one of the most challenging tasks in complex system modelling, due to the many different scales and intertwined physical phenomena involved. The nuclear industry as well as the research institutes and universities heavily rely on the use of complex numerical codes. All the commercial codes are based on using different numerical tools for resolving the various physical fields, and to some extent the different scales, whereas the latest research platforms attempt to adopt a more integrated approach in resolving multiple scales and fields of physics. The book presents the main algorithms used in such codes for neutronic and thermal-hydraulic modelling, providing the details of the underlying methods, together with their assumptions and limitations. Because of the rapidly expanding use of coupled calculations for performing safety analyses, the analysists should be equally knowledgeable in all fields (i.e. neutron transport, fluid dynamics, heat transfer).The first chapter introduces the book's subject matter and explains how to use its digital resources and interactive features. The following chapter derives the governing equations for neutron transport, fluid transport, and heat transfer, so that readers not familiar with any of these fields can comprehend the book without difficulty. The book thereafter examines the peculiarities of nuclear reactor systems and provides an overview of the relevant modelling strategies. Computational methods for neutron transport, first at the cell and assembly levels, then at the core level, and for one-/two-phase flow transport and heat transfer are treated in depth in respective chapters. The coupling between neutron transport solvers and thermal-hydraulic solvers for coarse mesh macroscopic models is given particular attention in a dedicated chapter. The final chapter summarizes the main techniques presented in the book and their interrelation, then explores beyond state-of-the-art modelling techniques relying on more integrated approaches. - Covers neutron transport, fluid dynamics, and heat transfer, and their interdependence, in one reference - Analyses the emerging area of multi-physics and multi-scale reactor modelling - Contains 71 short videos explaining the key concepts and 77 interactive quizzes allowing the readers to test their understanding
Download or read book Neutronic Analysis For Nuclear Reactor Systems written by Bahman Zohuri and published by Springer. This book was released on 2016-11-01 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the entire spectrum of the science and technology of nuclear reactor systems, from underlying physics, to next generation system applications and beyond. Beginning with neutron physics background and modeling of transport and diffusion, this self-contained learning tool progresses step-by-step to discussions of reactor kinetics, dynamics, and stability that will be invaluable to anyone with a college-level mathematics background wishing to develop an understanding of nuclear power. From fuels and reactions to full systems and plants, the author provides a clear picture of how nuclear energy works, how it can be optimized for safety and efficiency, and why it is important to the future.
Download or read book Multi Physics and Multi Scale Modeling and Simulation Methods for Nuclear Reactor Application written by Xingjie Peng and published by Frontiers Media SA. This book was released on 2024-02-28 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: A nuclear reactor operates in an environment where complex multi-physics and multi-scale phenomena exist, and it requires consideration of coupling among neutronics, thermal hydraulics, fuel performance, chemical dynamics, and coupling between the reactor core and first circuit. Safe, reliable, and economical operation can be achieved by leveraging high-fidelity numerical simulation, and proper considerations for coupling among different physics and required to provide powerful numerical simulation tools. In the past simplistic models for some of the physics phenomena are used, with the recent development of advanced numerical methods, software design, and high-performance computing power, the appeal of multi-physics and multi-scale modeling and simulation has been broadened.
Download or read book Nuclear Fusion Programme Annual Report of the Association Karlsruhe Institute of Technology EURATOM January 2013 December 2013 written by Pleli, Ingrid and published by KIT Scientific Publishing. This book was released on 2015-03-18 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coupled Neutronics thermal hydraulics Analyses of Supercritical Water Reactor written by Po Hu and published by . This book was released on 2008 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Single phase Two phase and Supercritical Natural Circulation Systems written by Pallippattu Krishnan Vijayan and published by Woodhead Publishing. This book was released on 2019-06-19 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single-Phase, Two-Phase and Supercritical Natural Circulation Systems provides readers with a deep understanding of natural circulation systems. This book equips the reader with an understanding on how to detect unstable loops to ensure plant safety and reliability, calculate heat transport capabilities, and design effective natural circulation loops, stability maps and parallel channel systems. Each chapter begins with an introduction to the circulation system before discussing each element in detail and analyzing its effect on the performance of the system. The book also presents thermosyphon heat transport devices in nuclear and other industrial plants, a common information need for students and researchers alike. This book is invaluable for engineers, designers, operators and consultants in nuclear, mechanical, electrical and chemical disciplines. - Presents single-phase, two-phase and supercritical natural circulation systems together in one resource to fill an existing knowledge gap - Guides the reader through relevant processes, such as designing, analyzing and generating stability maps and natural circulation loops, calculating heat transport capabilities, and maintaining natural circulation system operations - Includes global case studies and examples to increase understanding, along with important IAEA standards and procedures
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975-04 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resilience A New Paradigm of Nuclear Safety written by Joonhong Ahn and published by Springer. This book was released on 2017-08-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is published open access under a CC BY 4.0 license. This book summarizes presentations and discussions from the two-day international workshop held at UC Berkeley in March 2015, and derives questions to be addressed in multi-disciplinary research toward a new paradigm of nuclear safety. The consequences of the Fukushima Daiichi nuclear accident in March 2011 have fuelled the debate on nuclear safety: while there were no casualties due to radiation, there was substantial damage to local communities. The lack of common understanding of the basics of environmental and radiological sciences has made it difficult for stakeholders to develop effective strategies to accelerate recovery, and this is compounded by a lack of effective decision-making due to the eroded public trust in the government and operators. Recognizing that making a society resilient and achieving higher levels of safety relies on public participation in and feedback on decision-making, the book focuses on risk perception and mitigation in its discussion of the development of resilient communities.
