Download or read book Neutron Irradiation Effects in A 286 Hastelloy X and Ren 41 Alloys written by F. D. Kingsbury and published by . This book was released on 1963 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies to determine the effect of neutron environment on the stress-rupture properties of A-286, Hastelloy X, and René 41 alloys are described. Specimens were irradiated in the Engineering Test Reactor at approximately 540 and 650 C to fast neutron dosages of 4 to 11 x 1019 nvt (En ? 1 Mev). Postirradiation stress-rupture tests were conducted at 540 and 650 C. The effect of reheat treatment following irradiation was investigated.

Download or read book Effects of Neutron Irradiation on the Elevated Temperature Mechanical Properties of Nickel Base and Refractory Metal Alloys written by T. T. Claudson and published by . This book was released on 1967 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear research and power reactors are now being designed which must operate at temperatures and coolant environments dictating the use of nickel-base and refractory metal alloys for structural components, fuel cladding, and power equipment. Investigation of the effects of irradiation and environment upon the mechanical properties of several nickel-base and refractory metal alloys has been initiated at the Pacific Northwest Laboratory. Tension specimens of Inconel 600, Inconel 625, Inconel 702, Inconel 718, Incoloy 800, Hastelloy C, Hastelloy N, Hastelloy X-280, and Hastelloy R-235 have been irradiated to exposures exceeding 1 x 1021 nvt (E > 1 Mev) in 50 C water, 280 C water, and 740 C gaseous environments. These specimens have been tested in the pre- and postirradiated conditions at room temperature, 300 C, and 650 C. Several metallurgical conditions of the materials have also been examined and the changes in mechanical properties due to the irradiation have been noted. The Cb-1 Zr, Cb-752, TZM Mo, and W-25 Re refractory metals have been irradiated at ambient temperatures, and the effects of irradiation upon the mechanical properties have been evaluated at room temperature and 1090 C. The data obtained for both the nickel-base and refractory metal alloys tested indicate that there is a marked effect upon the mechanical properties due to the thermal environment. In addition to this effect, effects due to the irradiation were also found. Comparison of the elevated temperature data to the room temperature data shows a marked decrease in both strength and ductility. Metallographic examination of these materials is continuing in an attempt to find the cause of these damages.

Download or read book Irradiation Effects on Structural Alloys for Nuclear Reactor Applications written by A. L. Bement and published by ASTM International. This book was released on 1971 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Neutron Irradiation in Non fissionable Metals and Alloys written by International Atomic Energy Agency and published by . This book was released on 1962 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Nuclear Radiation on Structural Metals written by Frederic R. Shober and published by . This book was released on 1961 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of fast-neutron (>1 Mev) irradiation on the mechanical properties of structural metals and alloys was studied. Although the yield strengths and ultimate tensile strengths are increased su stantially for most materials, the ductility suffers severe decreases. This report presents these changes in properties of several structural metals for a number of neutron exposures within the 1.0 x 10 to the 18th power to 5.0 x 10 to the 21st power n/sq cm range. Data summarizing these effects on several classes of materials such as carbon steels, low-alloy steels, stainless steels, Zr-base alloys, ni-base alloys, Al-base alloys, and Ta are given. Additional data which show the influence f irradiation temperatures and of post-irradiation annealing on the radiation-induced property changes are also given and discussed. Increases as great as 175% in yield strength, 100% in ultimate strength, and decreases of 80% in total elongation are reported for fast-neutron exposures as great as 5 10 to the 21st power n/sq cm. (Author).

Download or read book Neutron Irradiation Effects on the Tensile Properties of Inconel 718 Waspaloy and A 286 written by and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Neutron Irradiation on Deformation Behavior of Nickel base Fastener Alloys written by and published by . This book was released on 1999 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents the effects of neutron irradiation on the fracture behavior and deformation microstructure of high-strength nickel-base alloy fastener materials, Alloy X-750 and Alloy 625. Alloy X-750 in the HTH condition, and Alloy 625 in the direct aged condition were irradiated to a fluence of 2.4x102° n/cm2 at 264 C in the Advanced Test Reactor. Deformation structures at low strains were examined. It was previously shown that Alloy X-750 undergoes hardening, a significant degradation in ductility and an increase in intergranular fracture. In contrast, Alloy 625 had shown softening with a concomitant increase in ductility and transgranular failure after irradiation. The deformation microstructures of the two alloys were also different. Alloy X-750 deformed by a planar slip mechanism with fine microcracks forming at the intersections of slip bands with grain boundaries. Alloy 625 showed much more homogeneous deformation with fine, closely spaced slip bands and an absence of microcracks. The mechanism(s) of irradiation assisted stress corrosion cracking (IASCC) are discussed.

Download or read book Neutron Irradiation Effects on the Mechanical Properties of Thorium and Thorium carbon Alloy written by Simon Cheng-Ping Wang and published by . This book was released on 1978 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Neutron Irradiation Effects in Austenitic Stainless Steels and a Nimonic Alloy written by G.H. Broomfield and published by . This book was released on 1964 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Neutron Irradiation on Non fissionable Alloys written by and published by . This book was released on 1962 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Neutron Irradiation in Non fissionable Metals and Alloys written by and published by . This book was released on 1962 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.

Download or read book Characterization of Minerals Metals and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.

Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.

Download or read book Materials for Nuclear Plants written by Wolfgang Hoffelner and published by Springer Science & Business Media. This book was released on 2012-09-21 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The clamor for non-carbon dioxide emitting energy production has directly impacted on the development of nuclear energy. As new nuclear plants are built, plans and designs are continually being developed to manage the range of challenging requirement and problems that nuclear plants face especially when managing the greatly increased operating temperatures, irradiation doses and extended design life spans. Materials for Nuclear Plants: From Safe Design to Residual Life Assessments provides a comprehensive treatment of the structural materials for nuclear power plants with emphasis on advanced design concepts. Materials for Nuclear Plants: From Safe Design to Residual Life Assessments approaches structural materials with a systemic approach. Important components and materials currently in use as well as those which can be considered in future designs are detailed, whilst the damage mechanisms responsible for plant ageing are discussed and explained. Methodologies for materials characterization, materials modeling and advanced materials testing will be described including design code considerations and non-destructive evaluation concepts. Including models for simple system dynamic problems and knowledge of current nuclear power plants in operation, Materials for Nuclear Plants: From Safe Design to Residual Life Assessments is ideal for students studying postgraduate courses in Nuclear Engineering. Designers on courses for code development, such as ASME or ISO and nuclear authorities will also find this a useful reference.

Download or read book High Entropy Alloys written by B.S. Murty and published by Elsevier. This book was released on 2019-03-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Entropy Alloys, Second Edition provides a complete review of the current state of the field of high entropy alloys (HEA). Building upon the first edition, this fully updated release includes new theoretical understandings of these materials, highlighting recent developments on modeling and new classes of HEAs, such as Eutectic HEAs and Dual phase HEAs. Due to their unique properties, high entropy alloys have attracted considerable attention from both academics and technologists. This book presents the fundamental knowledge, the spectrum of various alloy systems and their characteristics, key focus areas, and the future scope of the field in terms of research and technological applications. Provides an up-to-date, comprehensive understanding on the current status of HEAs in terms of theoretical understanding and modeling efforts Gives a complete idea on alloy design criteria of various classes of HEAs developed so far Discusses the microstructure property correlations in HEAs in terms of structural and functional properties Presents a comparison of HEAs with other multicomponent systems, like intermetallics and bulk metallic glasses