Download or read book Radiation Effects in Materials written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of radiation effects has developed as a major field of materials science from the beginning, approximately 70 years ago. Its rapid development has been driven by two strong influences. The properties of the crystal defects and the materials containing them may then be studied. The types of radiation that can alter structural materials consist of neutrons, ions, electrons, gamma rays or other electromagnetic waves with different wavelengths. All of these forms of radiation have the capability to displace atoms/molecules from their lattice sites, which is the fundamental process that drives the changes in all materials. The effect of irradiation on materials is fixed in the initial event in which an energetic projectile strikes a target. The book is distributed in four sections: Ionic Materials; Biomaterials; Polymeric Materials and Metallic Materials.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book Additive Friction Stir Deposition written by Hang Z. Yu and published by Elsevier. This book was released on 2022-07-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Friction Stir Deposition is a comprehensive summary of the state-of-the-art understanding on this emerging solid-state additive manufacturing technology. Sections cover additive friction stir deposition, encompassing advances in processing science, metallurgical science and innovative applications. The book presents a clear description of underlying physical phenomena, shows how the process determines the printing quality, covers resultant microstructure and properties in the as-printed state, highlights its key capabilities and limitations, and explores niche applications in repair, cladding and multi-material 3D printing. Serving as an educational and research guide, this book aims to provide a holistic picture of additive friction stir deposition-based solid-state additive manufacturing as well as a thorough comparison to conventional beam-based metal additive manufacturing, such as powder bed fusion and directed energy deposition. - Provides a clear process description of additive friction stir deposition and highlights key capabilities - Summarizes the current research and application of additive friction stir deposition, including material flow, microstructure evolution, repair and dissimilar material cladding - Discusses future applications and areas of research for this technology

Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.

Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.

Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.

Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.

Download or read book Material Properties of Unirradiated Uranium Molybdenum U Mo Fuel for Research Reactors written by International Atomic Energy Agency and published by . This book was released on 2020-10-12 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the material properties of all unirradiated Uranium-Molybdenum (U-Mo) fuel constituents that are essential for fuel designers and reactor operators to evaluate the fuel's performance and safety for research reactors. Many significant advances in the understanding and development of low enriched uranium U-Mo fuels have been made since 2004, stimulated by the need to understand irradiation behavior and early fuel failures during testing. The publication presents a comprehensive overview of mechanical and physical property data from U-Mo fuel research

Download or read book Superplasticity written by K. A. Padmanabhan and published by Springer. This book was released on 2018-12-08 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.

Download or read book Reactor Dosimetry written by Harry Farrar and published by ASTM International. This book was released on 1994 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 8th ASTM-Euratom Symposium, held in Vail, Colorado, Aug.-Sept. 1993, to provide a forum for experts to discuss their latest results under the broad theme of dosimetry for the correlation of radiation effects. Preceded by a summary of the keynote presentations and followed by summa

Download or read book Elements of Rapid Solidification written by Monde A. Otooni and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Rapid Solidification: Fundamentals and Applications is the product of many years of concentrated work in the field of rapid solidification and processing. This quasi-monograph is unique in two ways. It brings together the talent of many international scientists in an effort to focus attention on all aspects of a new scientific field and it concentrates on fundamentals and practical applications. Simply stated, this book has been written by the senior students in the field of rapid solidification technology for the new generation of solid-state physicists, materials scientists, materials engineers, metallurgists and ceramicists.

Download or read book Materials Handbook written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.

Download or read book The Metallurgy of Anodizing Aluminum written by Jude Mary Runge and published by Springer. This book was released on 2018-02-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the history of the concepts critical to the discovery and development of aluminum, its alloys and the anodizing process are reviewed to provide a foundation for the challenges, achievements, and understanding of the complex relationship between the aluminum alloy and the reactions that occur during anodic oxidation. Empirical knowledge that has long sustained industrial anodizing is clarified by viewing the process as corrosion science, addressing each element of the anodizing circuit in terms of the Tafel Equation. This innovative approach enables a new level of understanding and engineering control for the mechanisms that occur as the oxide nucleates and grows, developing its characteristic highly ordered structure, which impact the practical function of the anodic aluminum oxide.

Download or read book Energy Materials 2017 written by Xingbo Liu and published by Springer. This book was released on 2017-03-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection highlights materials research and innovations for a wide breadth of energy systems and technologies. The volume includes papers organized into the following sections:Energy and Environmental Issues in Materials Manufacturing and ProcessingMaterials in Clean PowerMaterials for Coal-Based PowerMaterials for Energy Conversion with Emphasis on SOFCMaterials for Gas TurbinesMaterials for Nuclear EnergyMaterials for Oil and Gas

Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.

Download or read book Corrosion Inspection and Monitoring written by Pierre R. Roberge and published by John Wiley & Sons. This book was released on 2007-02-09 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference on modern techniques and methods for monitoring and inspecting corrosion Strategic corrosion inspection and monitoring can improve asset management and life cycle assessment and optimize operational budgets. Advances in computer technologies and electronics have led to very efficient tools for monitoring and inspecting corrosion, including impedance spectroscopy, electrical field signatures, acoustic emissions, and radiographs. This up-to-date reference explains both intrusive and non-intrusive methods of measuring corrosion rates. It covers: The impact of corrosion on the economy and the safe operation of systems in diverse operational environments The various forms of corrosion, with a focus on the detectability of corrosion damage in the real world The principles of risk-based inspection and various risk assessment methodologies (HAZOP, FMECA, FTA, and ETA), with examples from industry The monitoring of microbiologically induced corrosion (MIC), cathodic protection (CP) systems, and atmospheric corrosion Non-destructive evaluation (NDE) techniques, including visual, ultrasonic, radiographic, electromagnetic, and thermographic inspection Roadmaps used by various industries and organizations for carrying out complex inspection and monitoring schedules Complete with graphics and illustrations, this is the definitive reference for professionals involved in the maintenance of industrial systems and structures, from oil exploration to chemical plants and infrastructures; consultants; property managers; and civil, materials, and construction engineers.

Download or read book Revolutionizing Aircraft Materials and Processes written by Spiros Pantelakis and published by Springer Nature. This book was released on 2020-03-11 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the emerging needs of the aerospace industry by discussing recent developments and future trends of aeronautic materials. It is aimed at advancing existing materials and fostering the ability to develop novel materials with less weight, increased mechanical properties, more functionality, diverse manufacturing methods, and recyclability. The development of novel materials and multifunctional materials has helped to increase efficiency and safety, reduce costs, and decrease the environmental foot print of the aeronautical industry. In this book, integral metallic structures designed by disruptive concepts, including topology optimization and additive manufacturing, are highlighted.