Download or read book Neural Network Engineering in Dynamic Control Systems written by Kenneth J. Hunt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies, .... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Within the control community there has been much discussion of and interest in the new Emerging Technologies and Methods. Neural networks along with Fuzzy Logic and Expert Systems is an emerging methodology which has the potential to contribute to the development of intelligent control technologies. This volume of some thirteen chapters edited by Kenneth Hunt, George Irwin and Kevin Warwick makes a useful contribution to the literature of neural network methods and applications. The chapters are arranged systematically progressing from theoretical foundations, through the training aspects of neural nets and concluding with four chapters of applications. The applications include problems as diverse as oven tempera ture control, and energy/load forecasting routines. We hope this interesting but balanced mix of material appeals to a wide range of readers from the theoretician to the industrial applications engineer.

Download or read book Neural Network Applications in Control written by George William Irwin and published by IET. This book was released on 1995 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim is to present an introduction to, and an overview of, the present state of neural network research and development, with an emphasis on control systems application studies. The book is useful to a range of levels of reader. The earlier chapters introduce the more popular networks and the fundamental control principles, these are followed by a series of application studies, most of which are industrially based, and the book concludes with a consideration of some recent research.

Download or read book Neural Networks for Modelling and Control of Dynamic Systems written by M. Norgaard and published by . This book was released on 2003 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Neural Systems for Control written by Omid Omidvar and published by Elsevier. This book was released on 1997-02-24 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control problems offer an industrially important application and a guide to understanding control systems for those working in Neural Networks. Neural Systems for Control represents the most up-to-date developments in the rapidly growing aplication area of neural networks and focuses on research in natural and artifical neural systems directly applicable to control or making use of modern control theory. The book covers such important new developments in control systems such as intelligent sensors in semiconductor wafer manufacturing; the relation between muscles and cerebral neurons in speech recognition; online compensation of reconfigurable control for spacecraft aircraft and other systems; applications to rolling mills, robotics and process control; the usage of past output data to identify nonlinear systems by neural networks; neural approximate optimal control; model-free nonlinear control; and neural control based on a regulation of physiological investigation/blood pressure control. All researchers and students dealing with control systems will find the fascinating Neural Systems for Control of immense interest and assistance. Focuses on research in natural and artifical neural systems directly applicable to contol or making use of modern control theory Represents the most up-to-date developments in this rapidly growing application area of neural networks Takes a new and novel approach to system identification and synthesis

Download or read book Adaptive Control with Recurrent High order Neural Networks written by George A. Rovithakis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Neural networks is one of those areas where an initial burst of enthusiasm and optimism leads to an explosion of papers in the journals and many presentations at conferences but it is only in the last decade that significant theoretical work on stability, convergence and robustness for the use of neural networks in control systems has been tackled. George Rovithakis and Manolis Christodoulou have been interested in these theoretical problems and in the practical aspects of neural network applications to industrial problems. This very welcome addition to the Advances in Industrial Control series provides a succinct report of their research. The neural network model at the core of their work is the Recurrent High Order Neural Network (RHONN) and a complete theoretical and simulation development is presented. Different readers will find different aspects of the development of interest. The last chapter of the monograph discusses the problem of manufacturing or production process scheduling.

Download or read book Neural Network Control of Nonlinear Discrete Time Systems written by Jagannathan Sarangapani and published by CRC Press. This book was released on 2018-10-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent systems are a hallmark of modern feedback control systems. But as these systems mature, we have come to expect higher levels of performance in speed and accuracy in the face of severe nonlinearities, disturbances, unforeseen dynamics, and unstructured uncertainties. Artificial neural networks offer a combination of adaptability, parallel processing, and learning capabilities that outperform other intelligent control methods in more complex systems. Borrowing from Biology Examining neurocontroller design in discrete-time for the first time, Neural Network Control of Nonlinear Discrete-Time Systems presents powerful modern control techniques based on the parallelism and adaptive capabilities of biological nervous systems. At every step, the author derives rigorous stability proofs and presents simulation examples to demonstrate the concepts. Progressive Development After an introduction to neural networks, dynamical systems, control of nonlinear systems, and feedback linearization, the book builds systematically from actuator nonlinearities and strict feedback in nonlinear systems to nonstrict feedback, system identification, model reference adaptive control, and novel optimal control using the Hamilton-Jacobi-Bellman formulation. The author concludes by developing a framework for implementing intelligent control in actual industrial systems using embedded hardware. Neural Network Control of Nonlinear Discrete-Time Systems fosters an understanding of neural network controllers and explains how to build them using detailed derivations, stability analysis, and computer simulations.

Download or read book Artificial Neural Networks for Modelling and Control of Non Linear Systems written by Johan A.K. Suykens and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial neural networks possess several properties that make them particularly attractive for applications to modelling and control of complex non-linear systems. Among these properties are their universal approximation ability, their parallel network structure and the availability of on- and off-line learning methods for the interconnection weights. However, dynamic models that contain neural network architectures might be highly non-linear and difficult to analyse as a result. Artificial Neural Networks for Modelling and Control of Non-Linear Systems investigates the subject from a system theoretical point of view. However the mathematical theory that is required from the reader is limited to matrix calculus, basic analysis, differential equations and basic linear system theory. No preliminary knowledge of neural networks is explicitly required. The book presents both classical and novel network architectures and learning algorithms for modelling and control. Topics include non-linear system identification, neural optimal control, top-down model based neural control design and stability analysis of neural control systems. A major contribution of this book is to introduce NLq Theory as an extension towards modern control theory, in order to analyze and synthesize non-linear systems that contain linear together with static non-linear operators that satisfy a sector condition: neural state space control systems are an example. Moreover, it turns out that NLq Theory is unifying with respect to many problems arising in neural networks, systems and control. Examples show that complex non-linear systems can be modelled and controlled within NLq theory, including mastering chaos. The didactic flavor of this book makes it suitable for use as a text for a course on Neural Networks. In addition, researchers and designers will find many important new techniques, in particular NLq emTheory, that have applications in control theory, system theory, circuit theory and Time Series Analysis.

Download or read book Data Driven Science and Engineering written by Steven L. Brunton and published by Cambridge University Press. This book was released on 2022-05-05 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook covering data-science and machine learning methods for modelling and control in engineering and science, with Python and MATLAB®.

Download or read book Neural Networks for Control written by W. Thomas Miller and published by MIT Press. This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural Networks for Control brings together examples of all the most important paradigms for the application of neural networks to robotics and control. Primarily concerned with engineering problems and approaches to their solution through neurocomputing systems, the book is divided into three sections: general principles, motion control, and applications domains (with evaluations of the possible applications by experts in the applications areas.) Special emphasis is placed on designs based on optimization or reinforcement, which will become increasingly important as researchers address more complex engineering challenges or real biological-control problems.A Bradford Book. Neural Network Modeling and Connectionism series

Download or read book Neural Network Control Of Robot Manipulators And Non Linear Systems written by F W Lewis and published by CRC Press. This book was released on 1998-11-30 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been great interest in "universal controllers" that mimic the functions of human processes to learn about the systems they are controlling on-line so that performance improves automatically. Neural network controllers are derived for robot manipulators in a variety of applications including position control, force control, link flexibility stabilization and the management of high-frequency joint and motor dynamics. The first chapter provides a background on neural networks and the second on dynamical systems and control. Chapter three introduces the robot control problem and standard techniques such as torque, adaptive and robust control. Subsequent chapters give design techniques and Stability Proofs For NN Controllers For Robot Arms, Practical Robotic systems with high frequency vibratory modes, force control and a general class of non-linear systems. The last chapters are devoted to discrete- time NN controllers. Throughout the text, worked examples are provided.

Download or read book Neural Adaptive Control Technology written by Rafa? ?bikowski and published by World Scientific. This book was released on 1996 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outgrowth of the workshop on Neural Adaptive Control Technology, NACT I, held in 1995 in Glasgow. Selected workshop participants were asked to substantially expand and revise their contributions to make them into full papers.The workshop was organised in connection with a three-year European Union funded Basic Research Project in the ESPRIT framework, called NACT, a collaboration between Daimler-Benz (Germany) and the University of Glasgow (Scotland). A major aim of the NACT project is to develop a systematic engineering procedure for designing neural controllers for nonlinear dynamic systems. The techniques developed are being evaluated on concrete industrial problems from Daimler-Benz.In the book emphasis is put on development of sound theory of neural adaptive control for nonlinear control systems, but firmly anchored in the engineering context of industrial practice. Therefore the contributors are both renowned academics and practitioners from major industrial users of neurocontrol.

Download or read book Recent Advances in Control Problems of Dynamical Systems and Networks written by Ju H. Park and published by Springer Nature. This book was released on 2020-08-11 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book introduces readers to new analytical techniques and controller design schemes used to solve the emerging “hottest” problems in dynamic control systems and networks. In recent years, the study of dynamic systems and networks has faced major changes and challenges with the rapid advancement of IT technology, accompanied by the 4th Industrial Revolution. Many new factors that now have to be considered, and which haven’t been addressed from control engineering perspectives to date, are naturally emerging as the systems become more complex and networked. The general scope of this book includes the modeling of the system itself and uncertainty elements, examining stability under various criteria, and controller design techniques to achieve specific control objectives in various dynamic systems and networks. In terms of traditional stability matters, this includes the following special issues: finite-time stability and stabilization, consensus/synchronization, fault-tolerant control, event-triggered control, and sampled-data control for classical linear/nonlinear systems, interconnected systems, fractional-order systems, switched systems, neural networks, and complex networks. In terms of introducing graduate students and professional researchers studying control engineering and applied mathematics to the latest research trends in the areas mentioned above, this book offers an excellent guide.

Download or read book 11th World Conference Intelligent System for Industrial Automation WCIS 2020 written by Rafik Aziz Aliev and published by Springer Nature. This book was released on 2021-03-16 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 11th Scientific Conference “Intelligent systems for industrial automation,” WCIS-2020, held in Tashkent, Uzbekistan, on November 26–28, 2020. It includes contributions from diverse areas of intelligent industrial systems design as hybrid control systems, intelligent information systems, decision making under imperfect information and others. The topics of the papers include intelligent control systems, pattern recognition, Industry 4.0, information security, neural computing, fuzzy and evolutionary computation, decision making and support systems, modeling of chemical technological processes and others.

Download or read book AI Time Series Control System Modelling written by Chuzo Ninagawa and published by Springer Nature. This book was released on 2022-09-02 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the practical application of artificial intelligence (AI) methods using time series data in system control. This book consistently discusses the application of machine learning to the analysis and modelling of time series data of physical quantities to be controlled in the field of system control. Since dynamic systems are not stable steady states but changing transient states, the changing transient states depend on the state history before the change. In other words, it is essential to predict the change from the present to the future based on the time history of each variable in the target system, and to manipulate the system to achieve the desired change. In short, time series is the key to the application of AI machine learning to system control. This is the philosophy of this book: "time series data" + "AI machine learning" = "new practical control methods". This book can give my helps to undergradate or graduate students, institute researchers and senior engineers whose scientific background are engineering, mathematics, physics and other natural sciences.

Download or read book Artificial Neural Networks for Engineering Applications written by Alma Y. Alanis and published by Academic Press. This book was released on 2019-03-15 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Neural Networks for Engineering Applications presents current trends for the solution of complex engineering problems that cannot be solved through conventional methods. The proposed methodologies can be applied to modeling, pattern recognition, classification, forecasting, estimation, and more. Readers will find different methodologies to solve various problems, including complex nonlinear systems, cellular computational networks, waste water treatment, attack detection on cyber-physical systems, control of UAVs, biomechanical and biomedical systems, time series forecasting, biofuels, and more. Besides the real-time implementations, the book contains all the theory required to use the proposed methodologies for different applications. Presents the current trends for the solution of complex engineering problems that cannot be solved through conventional methods Includes real-life scenarios where a wide range of artificial neural network architectures can be used to solve the problems encountered in engineering Contains all the theory required to use the proposed methodologies for different applications

Download or read book Intelligent Systems and Soft Computing for Nuclear Science and Industry written by D Ruan and published by World Scientific. This book was released on 1996-07-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following FLINS '94, the 1st International workshop on fuzzy logic and intelligent technologies in nuclear science, FLINS '96 aimed to introduce the principles of intelligent systems and soft computing, such as fuzzy logic, neural networks, genetic algorithms (and any combination of these three), knowledge-based expert systems and complex problem-solving techniques, in nuclear science and industry and in related fields. This volume presents carefully selected papers drawn from more than 20 countries. It covers theoretical aspects of intelligent systems and soft computing, together with their applications in nuclear science and industry. Contents:Fuzzy Algorithmic and Knowledge-Based Decision Support in Nuclear Engineering(H-J Zimmermann)Problem-Solving with Multiple Interdependent Criteria: Better Solutions to Complex Problems (C Carlsson & R Fullér)Functional Modelling for Integration of Human–Software–Hardware in Complex Physical Systems (M Modarres)Applying the Transferable Belief Model to Diagnostic Problems (P Smets)Application of Fuzzy Decision Making to Countermeasure Strategies After a Nuclear Accident (X Liu & D Ruan)A Fuzzy Control Algorithm for a Mobile Robot to Move Pass Obstacles (B-S Moon & J Lee)Experiments of Fuzzy Logic Control on a Nuclear Research Reactor (Z Liu & D Ruan)Intelligent Engineering and Technology for Nuclear Power Plant Operation (P P Wang & X L Gu)Improved Method for Incipient Multiple Fault Diagnosis with Application to Nuclear Power Plant (H-Y Chung et al)A Fuzzy Controller for NPPs (G H Schildt)Expert Environment for the Development of Nuclear Power Plants Failure Diagnosis Systems (P N Guido et al)Integrating Information in a Real-Time Data Visualization System on Nuclear Power Plant (E G Galdoz et al)and other papers Readership: Scientists and researchers in artificial intelligence, neural networks, fuzzy logic, robotics, software engineering, nuclear engineering, industrial chemistry, nuclear physics, mathematical physics, and applied mathematics. keywords:

Download or read book Neural Network Modeling and Identification of Dynamical Systems written by Yuri Tiumentsev and published by Academic Press. This book was released on 2019-05-17 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural Network Modeling and Identification of Dynamical Systems presents a new approach on how to obtain the adaptive neural network models for complex systems that are typically found in real-world applications. The book introduces the theoretical knowledge available for the modeled system into the purely empirical black box model, thereby converting the model to the gray box category. This approach significantly reduces the dimension of the resulting model and the required size of the training set. This book offers solutions for identifying controlled dynamical systems, as well as identifying characteristics of such systems, in particular, the aerodynamic characteristics of aircraft. Covers both types of dynamic neural networks (black box and gray box) including their structure, synthesis and training Offers application examples of dynamic neural network technologies, primarily related to aircraft Provides an overview of recent achievements and future needs in this area