Download or read book Networked and Event Triggered Control Approaches in Cyber Physical Systems written by Jinhui Zhang and published by CRC Press. This book was released on 2022-01-27 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The insertion of communication networks in feedback control loops complicates analysis and synthesis of cyber-physical systems (CPSs), and network-induced uncertainties may degrade system control performance. Thus, this book researches networked delay compensation and event-triggered control approaches for a series of CPSs subject to network-induced uncertainties. The authors begin with an introduction to the concepts and challenges of CPSs, followed by an overview of networked control approaches and event-triggered control strategies in CPSs. Then, networked delay compensation and event-triggered control approaches are proposed for CPSs with network communication delay, data dropout, signal quantization, and event-triggered communication. More specifically, networked delay compensation approaches are proposed for linear/nonlinear networked controlled plants with time-varying and random network communication delays and data dropouts. To reduce computational burden and network communication loads in CPSs, event-triggered control, self-triggered control, co-design of event-triggered control and quantized control techniques, and event-triggered disturbance rejection control approaches are also presented. This book is an essential text for researchers and engineers interested in cybersecurity, networked control, and CPSs. It would also prove useful for graduate students in the fields of science, engineering, and computer science.

Download or read book Secure Coordination Control of Networked Robotic Systems written by Xiaolei Li and published by Springer Nature. This book was released on with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Cyber Physical Systems written by Danielle C. Tarraf and published by Springer. This book was released on 2013-06-30 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyber-physical systems (CPS) involve deeply integrated, tightly coupled computational and physical components. These systems, spanning multiple scientific and technological domains, are highly complex and pose several fundamental challenges. They are also critically important to society’s advancement and security. The design and deployment of the adaptable, reliable CPS of tomorrow requires the development of a basic science foundation, synergistically drawing on various branches of engineering, mathematics, computer science, and domain specific knowledge. This book brings together 19 invited papers presented at the Workshop on Control of Cyber-Physical Systems, hosted by the Department of Electrical & Computer Engineering at The Johns Hopkins University in March 2013. It highlights the central role of control theory and systems thinking in developing the theory of CPS, in addressing the challenges of cyber-trust and cyber-security, and in advancing emerging cyber-physical applications ranging from smart grids to smart buildings, cars and robotic systems.

Download or read book Event Based Control and Signal Processing written by Marek Miskowicz and published by CRC Press. This book was released on 2018-09-03 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Event-based systems are a class of reactive systems deployed in a wide spectrum of engineering disciplines including control, communication, signal processing, and electronic instrumentation. Activities in event-based systems are triggered in response to events usually representing a significant change of the state of controlled or monitored physical variables. Event-based systems adopt a model of calls for resources only if it is necessary, and therefore, they are characterized by efficient utilization of communication bandwidth, computation capability, and energy budget. Currently, the economical use of constrained technical resources is a critical issue in various application domains because many systems become increasingly networked, wireless, and spatially distributed. Event-Based Control and Signal Processing examines the event-based paradigm in control, communication, and signal processing, with a focus on implementation in networked sensor and control systems. Featuring 23 chapters contributed by more than 60 leading researchers from around the world, this book covers: Methods of analysis and design of event-based control and signal processing Event-driven control and optimization of hybrid systems Decentralized event-triggered control Periodic event-triggered control Model-based event-triggered control and event-triggered generalized predictive control Event-based intermittent control in man and machine Event-based PID controllers Event-based state estimation Self-triggered and team-triggered control Event-triggered and time-triggered real-time architectures for embedded systems Event-based continuous-time signal acquisition and DSP Statistical event-based signal processing in distributed detection and estimation Asynchronous spike event coding technique with address event representation Event-based processing of non-stationary signals Event-based digital (FIR and IIR) filters Event-based local bandwidth estimation and signal reconstruction Event-Based Control and Signal Processing is the first extensive study on both event-based control and event-based signal processing, presenting scientific contributions at the cutting edge of modern science and engineering.

Download or read book Principles of Cyber Physical Systems written by Sandip Roy and published by Cambridge University Press. This book was released on 2020-10-15 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops foundational concepts, key operational and design principles, and interdisciplinary applications for cyber-physical systems.

Download or read book Optimal Event Triggered Control Using Adaptive Dynamic Programming written by Sarangapani Jagannathan and published by CRC Press. This book was released on 2024-06-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Event-triggered Control using Adaptive Dynamic Programming discusses event triggered controller design which includes optimal control and event sampling design for linear and nonlinear dynamic systems including networked control systems (NCS) when the system dynamics are both known and uncertain. The NCS are a first step to realize cyber-physical systems (CPS) or industry 4.0 vision. The authors apply several powerful modern control techniques to the design of event-triggered controllers and derive event-trigger condition and demonstrate closed-loop stability. Detailed derivations, rigorous stability proofs, computer simulation examples, and downloadable MATLAB® codes are included for each case. The book begins by providing background on linear and nonlinear systems, NCS, networked imperfections, distributed systems, adaptive dynamic programming and optimal control, stability theory, and optimal adaptive event-triggered controller design in continuous-time and discrete-time for linear, nonlinear and distributed systems. It lays the foundation for reinforcement learning-based optimal adaptive controller use for infinite horizons. The text then: Introduces event triggered control of linear and nonlinear systems, describing the design of adaptive controllers for them Presents neural network-based optimal adaptive control and game theoretic formulation of linear and nonlinear systems enclosed by a communication network Addresses the stochastic optimal control of linear and nonlinear NCS by using neuro dynamic programming Explores optimal adaptive design for nonlinear two-player zero-sum games under communication constraints to solve optimal policy and event trigger condition Treats an event-sampled distributed linear and nonlinear systems to minimize transmission of state and control signals within the feedback loop via the communication network Covers several examples along the way and provides applications of event triggered control of robot manipulators, UAV and distributed joint optimal network scheduling and control design for wireless NCS/CPS in order to realize industry 4.0 vision An ideal textbook for senior undergraduate students, graduate students, university researchers, and practicing engineers, Optimal Event Triggered Control Design using Adaptive Dynamic Programming instills a solid understanding of neural network-based optimal controllers under event-sampling and how to build them so as to attain CPS or Industry 4.0 vision.

Download or read book Safety Security and Privacy for Cyber Physical Systems written by Riccardo M.G. Ferrari and published by Springer Nature. This book was released on 2021-06-08 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth overview of recent work related to the safety, security, and privacy of cyber-physical systems (CPSs). It brings together contributions from leading researchers in networked control systems and closely related fields to discuss overarching aspects of safety, security, and privacy; characterization of attacks; and solutions to detecting and mitigating such attacks. The book begins by providing an insightful taxonomy of problems, challenges and techniques related to safety, security, and privacy for CPSs. It then moves through a thorough discussion of various control-based solutions to these challenges, including cooperative fault-tolerant and resilient control and estimation, detection of attacks and security metrics, watermarking and encrypted control, privacy and a novel defense approach based on deception. The book concludes by discussing risk management and cyber-insurance challenges in CPSs, and by presenting the future outlook for this area of research as a whole. Its wide-ranging collection of varied works in the emerging fields of security and privacy in networked control systems makes this book a benefit to both academic researchers and advanced practitioners interested in implementing diverse applications in the fields of IoT, cooperative autonomous vehicles and the smart cities of the future.

Download or read book Networked Predictive Control of Systems with Communication Constraints and Cyber Attacks written by Zhong-Hua Pang and published by Springer. This book was released on 2018-06-12 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest results on predictive control of networked systems, where communication constraints (e.g., network-induced delays and packet dropouts) and cyber attacks (e.g., deception attacks and denial-of-service attacks) are considered. For the former, it proposes several networked predictive control (NPC) methods based on input-output models and state-space models respectively. For the latter, it designs secure NPC schemes from the perspectives of information security and real-time control. Furthermore, it uses practical experiments to demonstrate the effectiveness and applicability of all the methods, bridging the gap between control theory and practical applications. The book is of interest to academic researchers, R&D engineers, and graduate students in control engineering, networked control systems and cyber-physical systems.

Download or read book Security of Cyber Physical Systems State Estimation and Control written by Chengwei Wu and published by Springer Nature. This book was released on 2021-10-19 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the secure problems of cyber-physical systems from both the adversary and defender sides. Targeting the challenging security problems of cyber-physical systems under malicious attacks, this book presents some recent novel secure state estimation and control algorithms, in which moving target defense scheme, zero-sum game-theoretical approach, reinforcement learning, neural networks, and intelligent control are adopted. Readers will find not only the valuable secure state estimation and control schemes combined with the approaches aforementioned, but also some vital conclusions for securing cyber-physical systems, for example, the critical value of allowed attack probability, the maximum number of sensors to be attacked, etc. The book also provides practical applications, example of which are unmanned aerial vehicles, interruptible power system, and robot arm to validate the proposed secure algorithms. Given its scope, it offers a valuable resource for undergraduate and graduate students, academics, scientists, and engineers who are working in this field.

Download or read book Security and Resilience in Cyber Physical Systems written by Masoud Abbaszadeh and published by Springer Nature. This book was released on 2022-08-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in cyber-physical security and resilience of cyber-physical systems, including cyber-attack detection, isolation, situation awareness, resilient estimation and resilient control under attack. It presents both theoretical results and important applications of the methods. Security and Resilience in Cyber-Physical Systems begins by introducing the topic of cyber-physical security, covering state-of-the-art trends in both theory and applications, as well as some of the emerging methodologies and future directions for research. It then moves on to detail theoretical methods of attack detection, resilient estimation and control within cyber-physical systems, before discussing their various applications, such as power generation and distribution, autonomous systems, wireless communication networks and chemical plants. Focusing on the detection of and accommodation to cyber-attacks on cyber-physical systems, and including both estimation and artificial-intelligence-based methods, this book will be of interest to researchers, engineers and graduate students within the fields of cyber-physical security and resilient control.

Download or read book Dynamic Systems with Time Delays Stability and Control written by Ju H. Park and published by Springer Nature. This book was released on 2019-08-29 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents up-to-date research developments and novel methodologies to solve various stability and control problems of dynamic systems with time delays. First, it provides the new introduction of integral and summation inequalities for stability analysis of nominal time-delay systems in continuous and discrete time domain, and presents corresponding stability conditions for the nominal system and an applicable nonlinear system. Next, it investigates several control problems for dynamic systems with delays including H(infinity) control problem Event-triggered control problems; Dynamic output feedback control problems; Reliable sampled-data control problems. Finally, some application topics covering filtering, state estimation, and synchronization are considered. The book will be a valuable resource and guide for graduate students, scientists, and engineers in the system sciences and control communities.

Download or read book Computational Intelligence Theories Applications and Future Directions Volume I written by Nishchal K. Verma and published by Springer. This book was released on 2018-07-31 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected proceedings of ICCI-2017, discussing theories, applications and future directions in the field of computational intelligence (CI). ICCI-2017 brought together international researchers presenting innovative work on self-adaptive systems and methods. This volume covers the current state of the field and explores new, open research directions. The book serves as a guide for readers working to develop and validate real-time problems and related applications using computational intelligence. It focuses on systems that deal with raw data intelligently, generate qualitative information that improves decision-making, and behave as smart systems, making it a valuable resource for researchers and professionals alike.

Download or read book Networked Control Systems with Intermittent Feedback written by Domagoj Tolić and published by CRC Press. This book was released on 2017-03-31 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems (NCSs) are spatially distributed systems for which the communication between sensors, actuators and controllers is realized by a shared (wired or wireless) communication network. NCSs offer several advantages, such as reduced installation and maintenance costs, as well as greater flexibility, over conventional control systems in which parts of control loops exchange information via dedicated point-to-point connections. The principal goal of this book is to present a coherent and versatile framework applicable to various settings investigated by the authors over the last several years. This framework is applicable to nonlinear time-varying dynamic plants and controllers with delayed dynamics; a large class of static, dynamic, probabilistic and priority-oriented scheduling protocols; delayed, noisy, lossy and intermittent information exchange; decentralized control problems of heterogeneous agents with time-varying directed (not necessarily balanced) communication topologies; state- and output-feedback; off-line and on-line intermittent feedback; optimal intermittent feedback through Approximate Dynamic Programming (ADP) and Reinforcement Learning (RL); and control systems with exogenous disturbances and modeling uncertainties.

Download or read book Modeling Control Estimation and Optimization for Microgrids written by Zhixiong Zhong and published by CRC Press. This book was released on 2019-10-28 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to increasing economic and environmental pressures, small-scale grids have received increasing attention in the last fifteen years. These renewable sources, such as solar PVs, wind turbines, and fuel cells, integrated with grid, have changed the way we live our lives. This book describes microgrid dynamics modeling and nonlinear control issues from introductory to the advanced steps. The book addresses the most relevant challenges in microgrid protection and control including modeling, uncertainty, stability issues, local control, coordination control, power quality, and economic dispatch.

Download or read book New Trends in Observer Based Control written by Olfa Boubaker and published by Academic Press. This book was released on 2019-03-30 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Trends in Observer-Based Control: An Introduction to Design Approaches and Engineering Applications, Volume One presents a clear-and-concise introduction to the latest advances in observer-based control design. It provides a comprehensive tutorial on new trends in the design of observer-based controllers for which the separation principle is well established. In addition, since the theoretical developments remain more advanced than the engineering applications, more experimental results are still needed. A wide range of applications are covered, and the book contains worked examples which make it ideal for both advanced courses and researchers starting in the field. - Presents a clear-and-concise introduction to the latest advances in observer-based control design - Offers concise content on the many facets of observer-based control design - Discusses key applications in the fields of power systems, robotics and mechatronics, and flight and automotive systems

Download or read book Artificial Neural Networks for Engineering Applications written by Alma Y Alanis and published by Academic Press. This book was released on 2019-02-13 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Neural Networks for Engineering Applications presents current trends for the solution of complex engineering problems that cannot be solved through conventional methods. The proposed methodologies can be applied to modeling, pattern recognition, classification, forecasting, estimation, and more. Readers will find different methodologies to solve various problems, including complex nonlinear systems, cellular computational networks, waste water treatment, attack detection on cyber-physical systems, control of UAVs, biomechanical and biomedical systems, time series forecasting, biofuels, and more. Besides the real-time implementations, the book contains all the theory required to use the proposed methodologies for different applications.

Download or read book Fault Estimation for Network Systems via Intermediate Estimator written by Jun-Wei Zhu and published by Springer Nature. This book was released on 2022-10-29 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the fault estimation problem for network systems. Firstly, to improve the existing adaptive fault estimation observer, a novel so-called intermediate estimator is proposed to identify the actuator or sensor faults in dynamic control systems with high accuracy and convergence speed. On this basis, by exploiting the properties of network systems such as multi-agent systems and large-scale interconnected systems, this book introduces the concept of distributed intermediate estimator; faults in different nodes can be estimated simultaneously; meanwhile, satisfactory consensus performances can be obtained via compensation based protocols. Finally, the characteristics of the new fault estimation methodology are verified and discussed by a series of experimental results on networked multi-axis motion control systems. This book can be used as a reference book for researcher and designer in the field of fault diagnosis and fault-tolerant control and can also be used as a reference book for senior undergraduate and graduate students in colleges and universities.