Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Processing, Consolidation and Metallurgy of Titanium Selected, peer reviewed papers from the Symposium on Powder Processing and Metallurgy of Titanium, December 4-7, 2011, Brisbane, Australia
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Titanium Powder Metallurgy and Additive Manufacturing written by Huiping Tang and published by Trans Tech Publications Ltd. This book was released on 2018-05-11 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing (PMTi 2017) Selected, peer reviewed papers from the 4th International Conference on Powder Metallurgy of Titanium (PMTi), September 8-10, 2017, Xian, China
Download or read book Additive Fabrication Spy Sampler written by and published by Castle Island Co. This book was released on with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys Basics And Applications written by Peng Cao and published by World Scientific. This book was released on 2024-05-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: At just half the weight of steel and nickel-based superalloys, titanium and its alloys stand out primarily due to their excellent corrosion resistance, high strength, and low density. Such distinctive properties make titanium attractive for a variety of applications, including aerospace, sports and leisure, and industrial uses.The book aims to cover important aspects of titanium metallurgy, from the basic characteristics of titanium to its advanced applications.The introductory chapter introduces the metallurgical background, physical and mechanical properties of titanium, with insights into specialty titanium alloys and titanium matrix composites. The book also discusses the correlation between microstructure and properties of titanium and its alloys along with various heat-treatment opportunities that exist for tailoring the properties to achieve excellent performance in a variety of products. Additionally, the variety of applications of titanium and its alloys in aerospace and non-aerospace markets are documented in detail.Serving an updated account of recent developments with respect to titanium and its alloys, this book is an excellent, timely, and comprehensive reference for materials scientist and engineers who wish to gain knowledge about these engineering materials.
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Department of the Interior and Related Agencies Appropriations for 1987 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1986 with total page 1492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conservation and Substitution Technology for Critical Materials written by and published by . This book was released on 1981 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The DOE FY 99 Budget Authorization Request H R 1806 to Provide for the Consolidation of the DOE Offices of Fossil Energy Renewable Energy and Energy Efficiency S 965 to Amend Title II of the Hydrogen Future Act of 1996 written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 1998 with total page 2068 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tool and Manufacturing Engineers Handbook written by Society of Manufacturing Engineers and published by Society of Manufacturing Engineers. This book was released on 1984-12-10 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: You'll rely on Forming to help you understand over 50 forming processes plus the advantages, limitations, and operating parameters for each process. Save valuable production time and gain a competitive edge with practical data that covers both the basics and advanced forming processes. Forming also helps you choose the most appropriate materials, utilize innovative die designs, and assess the advantages and limitations of different press types and processes.
Download or read book Spark Plasma Sintering written by Giacomo Cao and published by Elsevier. This book was released on 2019-06-10 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spark Plasma Sintering: Current Status, New Developments and Challenges looks at the progress made in the field of SPS. It includes a review of the scientific mechanisms, materials synthesis and industry applications for this processing technique. Chapters are written by leading experts in the field, encompassing topics surrounding the densification mechanism and microstructure evolution, the classification of high-performance materials, a review of numerical simulation, discussions of new technology advances, such as HP-SPS, flash sintering and related challenges. This book will be useful for researchers, engineers and students within the materials science and engineering fields. - Provides significant information on the most relevant research topics currently being addressed by the SPS community - Highlights the application of SPS techniques - Reviews critical issues that still need to be overcome when utilizing SPS technology
Download or read book Fabrication and Processing of Shape Memory Alloys written by Kush Mehta and published by Springer. This book was released on 2018-09-01 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases different processes of fabrication and processing applied to shape memory alloys. It provides details and collective information on working principles, process mechanisms, salient features, novel aspects, process capabilities, properties of material and unique applications of shape memory alloys. The recent progress on fabrication and processing are specially addressed in this book. It covers major topics of manufacturing such as machining, joining, welding and processing of shape memory alloys.
Download or read book Additive Manufacturing of Metals written by Gregory John Gibbons and published by MDPI. This book was released on 2021-05-26 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an exciting collection of research articles that offer a unique view into the fast developing field of metal additive manufacturing, providing insights into this advanced manufacturing technology. The articles span recent advances in metal AM technologies, and their application to a wide range of metals, exploring how the processing parameters offer unique material properties. This book encapsulates the state of the art in this rapidly evolving field of technology and will be a valuable resource for researchers in the field, from Ph.D. students to professors, and through to industrial end users.
Download or read book Tool and Manufacturing Engineers Handbook Desk Edition written by W. H. Cubberly and published by Society of Manufacturing Engineers. This book was released on 1989 with total page 1253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMEH Desk Edition presents a unique collection of manufacturing information in one convenient source. Contains selected information from TMEH Volumes 1-5--over 1,200 pages of manufacturing information. A total of 50 chapters cover topics such as machining, forming, materials, finishing, coating, quality control, assembly, and management. Intended for daily use by engineers, managers, consultants, and technicians, novice engineers or students.
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1977 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
