Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2093 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at University of San Diego, San Diego, CA, on July 27 to August 1, 1997. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the National Institute of Standards and Technology, the Federal Aviation Administration, and the National Science Foundation IndustrylUniversity Cooperative Research Centers. This year's Review of Progress in QNDE was attended by approximately 370 participants from the US and many foreign countries who presented a total of approximately 350 papers. As usual, the meeting was divided into 36 sessions with four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications and inspection systems, and methods of inspection science from acoustics to x-rays. The Review continues to experience some fluctuations in size, mostly under pressure from a decrease in funding for NDE research at the US Federal level, but increased participation from foreign laboratories has more than made up the difference. The Review is ideally sized to permit a full-scale overview of the latest developments in a collegial atmosphere that most participants favor. The opening plenary session this year concentrated on advances in imaging technologies and methodologies that have been made in recent years. Dr. K.
Download or read book Non Destructive Evaluation of Corrosion and Corrosion assisted Cracking written by Raman Singh and published by John Wiley & Sons. This book was released on 2019-03-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text to the non-destructive evaluation of degradation of materials due to environment that takes an interdisciplinary approach Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an important resource that covers the critical interdisciplinary topic of non-destructive evaluation of degradation of materials due to environment. The authors—noted experts in the field—offer an overview of the wide-variety of approaches to non-destructive evaluation and various types of corrosion. The text is filled with instructive case studies from a range of industries including aerospace, energy, defense, and processing. The authors review the most common non-destructive evaluation techniques that are applied in both research and industry in order to evaluate the properties and more importantly degradation of materials components or systems without causing damage. Ultrasonic, radiographic, thermographic, electromagnetic, and optical are some of the methods explored in the book. This important text: Offers a groundbreaking interdisciplinary approach to of non-destructive evaluation of corrosion and corrosion-assisted cracking Discusses techniques for non-destructive evaluation and various types of corrosion Includes information on the application of a variety of techniques as well as specific case studies Contains information targeting industries such as aerospace, energy, processing Presents information from leading researchers and technologists in both non-destructive evaluation and corrosion Written for life assessment and maintenance personnel involved in quality control, failure analysis, and R&D, Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an essential interdisciplinary guide to the topic.
Download or read book The Second Joint NASA FAA DoD Conference on Aging Aircraft written by and published by . This book was released on 1999 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing Reliability and Application of Micro and Nano material Systems written by and published by . This book was released on 2003 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book The First Joint DoD FAA NASA Conference on Aging Aircraft written by and published by . This book was released on 1998 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of NDT Data Fusion written by Xavier E. Gros and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive testing (NDT) systems can generate incomplete, incorrect or conflicting information about a flaw or a defect. Therefore, the use of more than one NDT system is usually required for accurate defect detection and/or quantification. In addition to a reduction in inspection time, important cost savings could be achieved if a data fusion process is developed to combine signals from multisensor systems for manual and remotely operated inspections. This gathering of data from multiple sources and an efficient processing of information help in decision making, reduce signal uncertainty and increase the overall performance of a non-destructive examination. This book gathers, for the first time, essays from leading NDT experts involved in data fusion. It explores the concept of data fusion by providing a comprehensive review and analysis of the applications of NDT data fusion. This publication concentrates on NDT data fusion for industrial applications and highlights progress and applications in the field of data fusion in areas ranging from materials testing in the aerospace industry to medical applications. Each chapter contains a specific case study with a theoretical part but also presents experimental results from a practical point of view. The book should be considered more as a pragmatic introduction to the applications of NDT data fusion rather than a rigorous basis for theoretical studies.
Download or read book Ultrasonic and Advanced Methods for Nondestructive Testing and Material Characterization written by C. H. Chen and published by World Scientific. This book was released on 2007 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.
Download or read book Nondestructive Characterization of Materials VI written by Robert E. Green and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally the vast majority of materials characterization techniques have been destructive, e. g. , chemical compositional analysis, metallographic determination of microstructure, tensile test measurement of mechanical properties, etc. Also, traditionally, nondestructive techniques have been used almost exclusively for the detection of macroscopic defects, mostly cracks, in structures and devices which have already been constructed and have already been in service for an extended period of time. Following these conventional nondestructive tests, it has been common practice to use somewhat arbitrary accept-reject criteria to decide whether or not the structure or device should be removed from service. The present unfavorable status of a large segment of industry, coupled with the desire to keep structures in service well past their original design life, dramatically show that our traditional approaches must be drastically modified if we are to be able to meet future needs. The role of nondestructive characterization of materials is changing and will continue to change dramatically. It has become increasingly evident that it is both practical and cost effective to expand the role of nondestructive evaluation to include all aspects of materials' production and application and to introduce it much earlier in the manufacturing cycle. In fact, the recovery of a large portion of industry from severe economic problems is dependent, in part, on the successful implementation of this expanded role.
Download or read book Columbia Accident Investigation Board Report written by United States. Columbia Accident Investigation Board and published by . This book was released on 2003 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Dale E. Chimenti and published by . This book was released on 2002-05-24 with total page 1078 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series provides a comprehensive review of the latest research results in quantitative nondestructive evaluation (NDE). Part A of Volume 21 details the development of nondestructive evaluation techniques. Part B addresses advances in materials characterization, new applications, and reliability.
Download or read book Bridge Maintenance Safety Management Resilience and Sustainability written by Fabio Biondini and published by CRC Press. This book was released on 2012-06-21 with total page 4119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Resilience and Sustainability contains the lectures and papers presented at The Sixth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2012), held in Stresa, Lake Maggiore, Italy, 8-12 July, 2012. This volume consists of a book of extended abstracts (800 pp) Extensive collection of revised expert papers on recent advances in bridge maintenance, safety, management and life-cycle performance, representing a major contribution to the knowledge base of all areas of the field.
Download or read book Advanced Ultrasonic Methods for Material and Structure Inspection written by Tribikram Kundu and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic signals are increasingly being used for predicting material behavior, both in an engineering context (detecting anomalies in a variety of structures) and a biological context (examining human bones, body parts and unborn fetuses). Featuring contributions from authors who are specialists in their subject area, this book presents new developments in ultrasonic research in both these areas, including ultrasonic NDE and other areas which go beyond traditional imaging techniques of internal defects. As such, both those in the biological and physical science communities will find this an informative and stimulating read.
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Nondestructive Materials Characterization written by Norbert G. H. Meyendorf and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an emphasis on aircraft materials, this book describes techniques for the material characterization to detect and quantify degradation processes such as corrosion and fatigue. It introduces readers to these techniques based on x-ray, ultrasonic, optical and thermal principles and demonstrates the potential of the techniques for a wide variety of applications concerning aircraft materials, especially aluminum and titanium alloys. The advantages and disadvantages of various techniques are evaluated.
Download or read book Fiscal Year 2001 NASA Authorization written by United States. Congress. House. Committee on Science. Subcommittee on Space and Aeronautics and published by . This book was released on 2001 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion written by Stephen D. Cramer and published by ASM International(OH). This book was released on 2003 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Every article from the 1987 edition has been reviewed, revised, expanded or updated! The purpose of ASM Handbook, Volume 13A: Corrosion: Fundamentals, Testing, and Protection is to help engineers and designers understand corrosion so that they can solve existing corrosion problems and prevent future ones. It should be the first book you select when researching a corrosion problem. The overage of the volume had been completely revised to ensure that it is the most comprehensive, practical, and up-to-date resource available. Each article is indexed to other appropriate sections of the Handbook, and each provides a road map to the thousand of individual bibliographical references that were used to compile the information. The editors have assembled over 120 leading authorities in the field of corrosion to review, revise, and contribute new articles to this volume. This volume replaces the landmark 1987 Metals Handbook volume on corrosion. In developing this new edition, the coverage of many of the topics has been greatly expanded. The volume has six major sections: Fundamentals of Corrosion, Forms of Corrosion, Corrosion Testing and Evaluation, Methods of Corrosion Protection, Designing for Corrosion Control and Prevention, and Tools for the Corrosionist.
