Download or read book NCHRP Report 567 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NCHRP Report 567 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Volumetric Requirements for Superpave Mix Design written by Donald W. Christensen and published by Transportation Research Board. This book was released on 2006 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 567: Volumetric Requirements for Superpave Mix Design examines whether changes to the recommended Superpave mix design criteria for voids in mineral aggregate, voids filled with asphalt, and air voids content might further enhance the performance and durability of hot-mix asphalt.
Download or read book A Manual for Design of Hot Mix Asphalt with Commentary written by and published by Transportation Research Board. This book was released on 2011 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wisconsin Mixture Characterization Using the Asphalt Mixture Performance Tester AMPT on Historical Aggregate Structures written by Ramon Francis Bonaquist and published by . This book was released on 2010 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Flow Number Fn as a Discriminating HMA Mixture Property written by Ramon Francis Bonaquist and published by . This book was released on 2012 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mix Design Practices for Warm Mix Asphalt written by Ramon Francis Bonaquist and published by Transportation Research Board. This book was released on 2011 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 691: Mix Design Practices for Warm-Mix Asphalt explores a mix design method tailored to the unique material properties of warm mix asphalt technologies. Warm mix asphalt (WMA) refers to asphalt concrete mixtures that are produced at temperatures approximately 50°F (28°C) or more cooler than typically used in the production of hot mix asphalt (HMA). The goal of WMA is to produce mixtures with similar strength, durability, and performance characteristics as HMA using substantially reduced production temperatures. There are important environmental and health benefits associated with reduced production temperatures including lower greenhouse gas emissions, lower fuel consumption, and reduced exposure of workers to asphalt fumes. Lower production temperatures can also potentially improve pavement performance by reducing binder aging, providing added time for mixture compaction, and allowing improved compaction during cold weather paving. Appendices to NCHRP Report 691 include the following. Appendices A, B, and D are included in the printed and PDF version of the report. Appendices C and E are available only online.
Download or read book Refinement of Current WisDOT HMA Mixture Application Guidelines Related to NMAS and Aggregate Characteristics written by Donald W. Christensen and published by . This book was released on 2013 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Short term Laboratory Aging of Neat and Modified Asphalt Binders written by David A. Anderson and published by Transportation Research Board. This book was released on 2012 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's National Cooperative Highway Research Program (NCHRP) Report 709: Investigation of Short-Term Laboratory Aging of Neat and Modified Asphalt Binders provides a proposed method of testing for short-term laboratory aging of neat and modified asphalt binders using the modified German rotating flask as an alternative to the rolling thin film oven test. The following appendixes A-E to NCHRP Report 709 are only available in electronic format."--
Download or read book Evaluation of the Moisture Susceptibility of WMA Technologies written by Amy Epps Martin and published by Transportation Research Board. This book was released on 2014 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's National Cooperative Highway Research Program (NCHRP) Report 763: Evaluation of the Moisture Susceptibility of WMA Technologies presents proposed guidelines for identifying potential moisture susceptibility in warm mix asphalt (WMA). The report also suggests potential revisions to the Appendix to AASHTO R 35, "Special Mixture Design Considerations and Methods for WMA" as a means to implement the guidelines."--publisher's description
Download or read book Advances in Pavement Design through Full scale Accelerated Pavement Testing written by David Jones and published by CRC Press. This book was released on 2012-10-08 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pack: Book and CDInternationally, full-scale accelerated pavement testing, either on test roads or linear/circular test tracks, has proven to be a valuable tool that fills the gap between models and laboratory tests and long-term experiments on in-service pavements. Accelerated pavement testing is used to improve understanding of pavement behavior,
Download or read book Bearing Capacity of Roads Railways and Airfields written by Andreas Loizos and published by CRC Press. This book was released on 2017-07-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bearing Capacity of Roads, Railways and Airfields includes the contributions to the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields (BCRRA 2017, 28-30 June 2017, Athens, Greece). The papers cover aspects related to materials, laboratory testing, design, construction, maintenance and management systems of transport infrastructure, and focus on roads, railways and airfields. Additional aspects that concern new materials and characterization, alternative rehabilitation techniques, technological advances as well as pavement and railway track substructure sustainability are included. The contributions discuss new concepts and innovative solutions, and are concentrated but not limited on the following topics: · Unbound aggregate materials and soil properties · Bound materials characteritics, mechanical properties and testing · Effect of traffic loading · In-situ measurements techniques and monitoring · Structural evaluation · Pavement serviceability condition · Rehabilitation and maintenance issues · Geophysical assessment · Stabilization and reinforcement · Performance modeling · Environmental challenges · Life cycle assessment and sustainability Bearing Capacity of Roads, Railways and Airfields is essential reading for academics and professionals involved or interested in transport infrastructure systems, in particular roads, railways and airfields.
Download or read book Characterization of Wisconsin Mixture Low Temperature Properties for the AASHTO Mechanistic empirical Pavement Design Guide written by Ramon Francis Bonaquist and published by . This book was released on 2011 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research evaluated the low temperature creep compliance and tensile strength properties of Wisconsin mixtures. Creep compliance and tensile strength data were collected for 16 Wisconsin mixtures representing commonly used aggregate sources and binder grades. Engineering and statistical analyses were performed on the data to provide recommendations for using measured mechanical properties in thermal cracking analyses with the Mechanistic-Empirical Pavement Design Guide (MEPDG), and to evaluate the thermal fracture resistance of Wisconsin mixtures.
Download or read book Transportation Noise and Noise from Equipment Powered by Internal Combustion Engines written by Wyle Laboratories and published by . This book was released on 1972 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Scale Modeling and Characterization of Infrastructure Materials written by Niki Kringos and published by Springer Science & Business Media. This book was released on 2013-05-26 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The micro- and nano-modification of infrastructure materials and the associated multi-scale characterization and simulation has the potential to open up whole new uses and classes of materials, with wide-ranging implications for society. The use of multi-scale characterization and simulation brings the ability to target changes at the very small scale that predictably effect the bulk behavior of the material and thus allowing for the optimization of material behavior and performance. The International RILEM Symposium on Multi-Scale Modeling and Characterization of Infrastructure Materials (Stockholm, June 10-12, 2013) brought together key researchers from around the world to present their findings and ongoing research in this field in a focused environment with extended discussion times. From asphalt to concrete, from chemistry to mechanics, from nano- to macro-scale: the collection of topics covered by the Symposium represents the width and depth of the currently ongoing efforts of developing more sustainable infrastructure materials. Researchers, practitioners, undergraduates and graduate students engaged in infrastructure materials or multi-scale characterization and modeling efforts can use this book as a comprehensive reference, to learn about the currently ongoing research efforts in this field or as an inspiration for new research ideas to enhance the long-term performance of infrastructure materials from a fundamental perspective. The Symposium was held under the auspices of the RILEM Technical Committee on Nanotechnology-Based Bituminous Materials 231-NBM and the Transport Research Board (TRB) Technical Committee on Characteristics of Asphalt Materials AFK20.
Download or read book Asphalt Paving Technology 2014 written by Eugene Skok and published by DEStech Publications, Inc. This book was released on 2015-02-10 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: New developments in asphalt with bio-oil, rubber and polymer componentsEmpirical data and models on binders, aggregates, RAP, WMA, HMA for pavementSpecial section on asphalt paving research in IndiaFully-searchable text on CD-ROM (included) The latest volume of the AAPT series features over two dozen research presentations devoted to the chemistry, engineering, modeling and testing of asphalt materials and processing. Developments in the use of components like bio-oil are discussed, as are strategies for testing asphalt components for wear and durability at low and high temperatures. The book offers new data on the performance of reclaimed/recycled materials in asphalt paving. A special section focuses exclusively on discussions of binder modifications. The CD-ROM displays figures and illustrations in articles in full color along with a title screen and main menu screen. Each user can link to all papers from the Table of Contents and Author Index and also link to papers and front matter by using the global bookmarks which allow navigation of the entire CD-ROM from every article. Search features on the CD-ROM can be by full text including all key words, article title, author name, and session title. The CD-ROM has Autorun feature for Windows 2000 with Service Pack 4 or higher products along with the program for Adobe Acrobat Reader with Search 11.0. One year of technical support is included with your purchase of this product.
Download or read book Summary of Progress National Cooperative Highway Research Program written by National Cooperative Highway Research Program and published by . This book was released on 2008 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
