Download or read book Natural Gas Conversion IV written by M. de Pontes and published by Elsevier. This book was released on 1997-03-14 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Natural Gas Conversion Symposium was attended by 180 delegates from 25 countries. Representation was evenly balanced between industry and academia. The opening address was delivered by Mr Roy Pithey, Chairman of South Africa's Central Energy Fund, who dealt with the importance and utilisation of natural gas in sub-Saharan Africa. Plenary lectures were presented by Professors E. Iglesia (Catalyst design and selectivity for F-T synthesis) and E.E. Wolf (Oxidative Coupling Methane). A number of keynote addresses were delivered:- Dr T. Fleisch (Amoco) described the use of DME as a transport fuel and the work which has been carried out in this area in collaboration with Haldor Topsoe- Professor L.D. Schmidt (Univ. of Minnesota) explained his work on the direct conversion of methane at high velocities- Dr B. Jager (SASTECH R & D) reported on the recent developments in slurry and fluidized bed F-T reactors as SASOL- Dr J. Rostrup-Nielsen (Haldor Topsoe) discussed the role of catalysis in the conversion of natural gas for power generation.Areas signalled for further research were: direct conversion of methane to intermediate monomers; methanol conversion to higher alcohols; CO/H2 conversion in a commercially viable route to higher alcohols; and CO/H2 conversion to high quality gasoline. It is obvious that such developments would fit into the energy cycle which has moved from wood, to coal, to oil, to gas, and will most probably move to hydrogen.

Download or read book Natural Gas Conversion IV Volume 107 written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.

Download or read book Natural Gas Conversion VIII written by Fabio Bellot Noronha and published by Elsevier. This book was released on 2011-09-22 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 8th Natural gas Conversion Symposium held in Natal-Brazil, May 27-31, 2007. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings. The manuscripts have been divided into eight different topics, Industrial Processes, Economics, Technology Demonstration and Commercial Activities;, Production of Hydrogen from Methane, Methanol, and Other Sources; Production of Synthesis; Fischer-Tropsch Synthesis of Hydrocarbons; From Synthesis Gas to; Catalytic Combustion; From Natural Gas to Chemicals; Light Hydrocarbons; and Production and Conversion. These are the most interesting subjects in the utilization of natural gas with recent scientific innovation and technological advances. The book is of interest to all students and researchers active in utilization of natural gas.* Research comes from the most important industries and research centres in the field * Features new studies from all around the world * Important for consulting and updating research and development data

Download or read book Natural Gas Conversion VII written by Xinhe Bao and published by Elsevier. This book was released on 2004-05-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 7th Natural gas Conversion Symposium held in Dalian, China, June 6-10, 2004, and a FREE CD-rom. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The manuscripts have been divided into eight different topics, Industrial Processes, Economics, Technology Demonstration and Commercial Activities;, Production of Hydrogen from Methane, Methanol, and Other Sources; Production of Synthesis; Fischer-Tropsch Synthesis of Hydrocarbons; From Synthesis Gas to; Catalytic Combustion; From Natural Gas to Chemicals; Light Hydrocarbons; and Production and Conversion .These are the most interesting subjects in the utilization of natural gas with recent scientific innovation and technological advances. The book is of interest to all students and researchers active in utilization of natural gas.- This book contains the papers of the symposium that is considered to be the premier technical meeting in this area.- The chapters give an overview of the latest developments in utilization of natural gas. - Topics included in the book are: Industrial Processes, Economics, Technology Demonstration and Commercial Activities;, Production of Hydrogen from Methane, Methanol, and Other Sources; Production of Synthesis; Fischer-Tropsch Synthesis of Hydrocarbons; From Synthesis Gas to; Catalytic Combustion; From Natural Gas to Chemicals; Light Hydrocarbons; and Production and Conversion.

Download or read book Natural Gas Conversion II written by H.E. Curry-Hyde and published by Elsevier. This book was released on 1994-07-15 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Symposium provided the opportunity to review progress after more than 10 years of research and development in the field of natural gas conversion. Oxidative coupling of methane as a route to higher value fuels or feedstock was a major part of the program. The advances in understanding of reaction mechanisms and catalyst structure were discussed in a Plenary paper and in many of the contributed papers.The homogeneous gas phase chemistry involved in methane oxidation is relevant not only to oxidative coupling but also to synthesis gas and methanol production via partial oxidation. This field is reviewed in a Plenary paper and contributed papers describe developments in catalysts and technology for partial oxidation to synthesis gas and to methanol. An alternative route to synthesis gas from methane currently receiving attention is carbon dioxide reforming. This technology is reviewed in a Plenary paper and recent advances are described in contributed papers. The first detailed account of the Shell SMDS Fischer-Tropsch process for production of transport fuels from natural gas recently commercialised in Malaysia is given in this book. Papers discuss structural aspects of Fischer-Tropsch catalysts, modifications of Fischer-Tropsch catalysts to produce light olefins, and the possibilities of operating a Fischer-Tropsch process off-shore. Methanol as an intermediate in natural gas conversion continues to attract attention, and methanol synthesis and conversion are discussed in contributed papers. The possibilities of finding new uses for methane are treated in a Plenary paper and arguments for using methane as a fuel rather than a feedstock are also presented. Among the new uses of methane considered are the generation of electricity in fuel cells and the use of methane as a reductant for NOx emissions.The papers will be of interest to scientists and engineers working in the field of gas conversion, transportation fuels, primary petrochemicals and catalysis.

Download or read book Advances in Chemical Conversions for Mitigating Carbon Dioxide written by T. Inui and published by Elsevier. This book was released on 1998-03-12 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global environmental problems, especially global warming caused by the accelerative accumulation of carbon dioxide in the atmosphere, are of great importance for humans. The world's population is now approaching 6 billion, and is still increasing. Developments in communication systems and transportation tools have made the circulation of information, technologies and materials easier, which results in rapid economic growth, particularly in the East and Southeastern Asian countries. Increased affluence leads to an increased consumption of fossil fuels. Inevitably, this leads to an increase in carbon dioxide emission and environmentally hazardous materials which in turn precipitates climatic changes on a global scale. Recent studies showed that the increase in carbon dioxide emission for last year was the highest in the past seven years, and the total amount of carbon dioxide emission from all over the world reached 6.5 billion tons. Furthermore, one cannot overlook the report which appeared recently in Nature, that the floor-area of the iceberg in the South Pole has already decreased by 25% in the past five decades.Over 260 scientists and engineers from 21 countries who had a strong interest and wished to contribute to solve the carbon dioxide problem attended this conference. The papers presented in this volume cover most of the possibilities of the chemical conversion of carbon dioxide.

Download or read book Direct Natural Gas Conversion to Value Added Chemicals written by Jianli Hu and published by CRC Press. This book was released on 2020-09-25 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Natural Gas Conversion to Value-Added Chemicals comprehensively discusses all major aspects of natural gas conversion and introduces a broad spectrum of recent technological developments. Specifically, the book describes heterogeneous and homogeneous catalysis, microwave-assisted conversion, non-thermal plasma conversion, electrochemical conversion, and novel chemical looping conversion approaches. Provides an excellent benchmark resource for the industry and academics Appeals to experienced researchers as well as newcomers to the field, despite the variety of contributing authors and the complexity of the material covered Includes all aspects of direct natural gas conversion: fundamental chemistry, different routes of conversion, catalysts, catalyst deactivation, reaction engineering, novel conversion concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development Discusses new developments in natural gas conversion and future challenges and opportunities This book is as an excellent resource for advanced students, technology developers, and researchers in chemical engineering, industrial chemistry, and others interested in the conversion of natural gas.

Download or read book Methanol written by Angelo Basile and published by Elsevier. This book was released on 2017-10-31 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol: Science and Engineering provides a comprehensive review of the chemistry, properties, and current and potential uses and applications of methanol. Divided into four parts, the book begins with a detailed account of current production methods and their economics. The second part deals with the applications of methanol, providing useful insights into future applications. Modeling of the various reactor systems is covered in the next section, with final discussions in the book focusing on the economic and environmental impact of this chemical. Users will find this to be a must-have resource for all researchers and engineers studying alternative energy sources. - Provides the latest developments on methanol research - Reviews methanol production methods and their economics - Outlines the use of methanol as an alternative green transportation fuel - Includes new technologies and many new applications of methanol

Download or read book New Developments and Application in Chemical Reaction Engineering written by Hyun-Ku Rhee and published by Elsevier. This book was released on 2006-05-10 with total page 951 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings of APCRE'05 contains the articles that were presented at the 4th Asia-Pacific Chemical Reaction Engineering Symposium (APCRE'05), held at Gyeongju, Korea between June 12 and June 15, 2005, with a theme of "New Opportunities of Chemical Reaction Engineering in Asia-Pacific Region". Following the tradition of APCRE Symposia and ISCRE, the scientific program encompassed a wide spectrum of topics, including not only the traditional areas but also the emerging fields of chemical reaction engineering into which the chemical reaction engineers have successfully spearheaded and made significant contributions in recent years. In addition to the 190 papers being accepted, six plenary lectures and 11 invited lectures are placed in two separate chapters in the front.* Provides an overview of new developments and application in chemical reaction engineering* Topics include traditional and emerging fields * Papers reviewed by experts in the field

Download or read book Catalytic Polymerization of Cycloolefins written by V. Dragutan and published by Elsevier. This book was released on 2000-06-26 with total page 1293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important topics concerning cationic Ziegler-Natta and ring-opening metathesis polymerization of cycloolefins. The work describes the major pathways that cycloolefins can follow under the action of specific catalytic systems, essentially vinyl and ring-opening polymerization, both reaction types allowing the manufacture of distinct products with wide applicability in modern technologies. The comprehensive data available on this subject are logically and systematically selected and reviewed throughout 18 chapters, according to the basic catalytic processes involved, types of monomers and catalysts employed, reaction conditions and application fields. The modern trends in design of chiral metallocene catalysts, well-defined living metathesis catalysts, catalysts tolerant toward functionalities and water systems are highlighted. The book discusses in detail the relevant aspects of these processes including reaction thermodynamics, kinetics, mechanisms and stereochemistry and correlates the structure of produced polymers with their chemical and physical-mechanical properties. Related important topics include Ziegler-Natta polymerization of olefins and dienes, atom transfer radical polymerization of vinyl compounds, metathesis of olefins and acetylenes, acyclic diene metathesis reaction, carbonyl olefination reaction, metathesis polymerization of acetylenes, metathesis degradation of polymers and ring-opening polymerization of heterocycles. Special emphasis is laid upon the manufacture of commerical products, new polymers and copolymers of potential interest for industry and design and synthesis of speciality polymers with particular structures and architectures and desired properties. The book critically evaluates the most recent achievements reported in this field and outlines the modern trends on the research and application of the catalytic processes for cycloolefin polymerization. For the first time, comprehensive information about the published data on the subject up to now is provided for both academic and industrial researchers working in the areas of polymer chemistry, organic and organometallic chemistry, surface science and catalysis, petrochemistry and chemical engineering. This stimulating book offers an enlightening introduction and a quick documentation on the subject as well as a solid background in this field. Moreover, the work offers a wealth of useful information for specialists applying polymers in various scientific and industrial areas.

Download or read book Characterization of Porous Solids VI written by and published by Elsevier. This book was released on 2002-11-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 99 of the papers that were presented at the 6th in the series of Symposia on Characterization of Porous Solids held in Alicante, Spain, May 2002. Written by leading international specialists in the subject, the contributions represent an up-to-date and authoritative account of recent developments around the world in the major methods used to characterize porous solids. The book is a useful work of reference for anyone interested in characterizing porous solids, such as MCM-41 mesoporous materials, pillared clays, etc. Papers on pore structure determination using gas adsorption feature strongly, together with papers on small angle scattering methods, mercury porosimetry, microcalorimetry, scanning probe microscopies, and image analysis.

Download or read book Characterisation of Porous Solids V written by G. Kreysa and published by Elsevier. This book was released on 2000-04-11 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Symposium on the Characterisation of Porous Solids (COPS-V) was held at Heidelberg, Germany, from May 30 to June 2, 1999. About 220 participants from 25 countries enjoyed a very successful meeting with 32 lectures and 155 poster presentations. The Symposium started with a highly stimulating lecture by Sir John Meurig Thomas, Cambridge, highlighting the recent developments in engineering of new catalysts. The following two full sessions were devoted to theory, modelling and simulation which provide the basis for the interpretation of pore structural data of adsorbents and finely dispersed solids. Sessions 2 and 3 focused on the advances in the synthesis and characterisation of highly ordered inorganic adsorbents and carbons. Sessions 4 and 5 addressed important questions with respect to the characterisation of porous solids by sorption measurement and other related techniques. The intensive three-day programme provided a stimulating forum for the exchange of novel research findings, concepts, techniques and materials which are collected in this volume.

Download or read book Coal and Coal Related Compounds written by Toshiaki Kabe and published by Elsevier. This book was released on 2004-11-18 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal is more abundant than petroleum and natural gas. Further, coal is not localized but can be used by many more countries than petroleum. Therefore, if we can establish coal utilization technology, coal will bring about a great contribution to human life and society. On the other hand, shortage of petroleum and natural gas are anticipated in the second half of the 21st century. To compensate, the use of coal is expected to gradually increase during the 21st century. In the future, the development of the coal utilization technology will become more and more important to insure the supply of liquid fuels for transportation and carbon sources for the manufacture of chemicals and plastic materials.In order to develop such technologies, the elucidation of the structure of coal is a fundamental area of study. Further, more efficient coal utilization technology must be established to meet environmental legislation. One of the key technologies for this purpose is catalysis. This volume provides detail of the basic and practical aspects of the science and technology of coal utilization with and without catalysts. The actual structure of coal, the chemistry included in the reactivity of coal, the methods to elucidate the structure of coal and re-action mechanisms of coal conversion, the most important catalyst for converting coal to liquid and gas, the role of the catalysts in coal conversion, the problems in the process engineering, and how to meet environmental regulations are discussed in detail. The recent progress in studies on the structure and reactivity of coal made over the last century is summarized and reviewed with emphasis on both fundamental and applied aspects of the science and technology for coal processing in the presence and absence of catalysts. * This book highlights the issues faced in trying to discover more efficient coal utilization technology.* Provides detailed discussion on how to meet environmental regulations and legislation. * Fills the gap between both the scientific and practical sides of coal utilization with and without catalysts.

Download or read book Science and Technology in Catalysis written by Masakazu Anpo and published by Gulf Professional Publishing. This book was released on 2003-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.

Download or read book Reaction Kinetics and the Development of Catalytic Processes written by G.F. Froment and published by Elsevier. This book was released on 1999-03-18 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium "Reaction Kinetics and the Development of Catalytic Processes" is the continuation of the very successful International Symposium "Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis", held in September 1997 in Antwerp, Belgium. These proceedings contain a unique series of top level plenary lectures mainly focused on• the dynamics of catalytic surfaces• the interaction of the reacting molecules with the solid catalyst• the elementary steps of reaction pathways and molecular kinetics.Surface science techniques, molecular modeling, transient kinetic studies, sophisticated and specific reactors are included to a growing extent in the kinetic modeling and the development of catalytic processes. How this is practiced today and how it will evolve in the coming years, and what benefit can be expected for a more fundamentally based approach is the aim of the symposium.