Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONDESTRUCTIVE TESTING written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for suppliers of nondestructive testing (NDT) to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP) in accordance with the current revision of SAE AS7003. Using the audit checklist and the applicable supplementary checklists will ensure that accredited NDT suppliers meet the requirements of this standard and all applicable supplementary standards.When customer requirements differ from those specified herein, the customer requirements shall take precedence.The NADCAP Nondestructive Testing Task Group recognizes SAE AS7004, SAE AS7106, SAE AS7107 or other quality systems documents approved by the NADCAP NDT Task Group as equivalent to portions of this document as noted in the audit checklist.
Download or read book National Aerospace and Defense Contractors Accreditation Program written by WT. Kaarlela and published by . This book was released on 1989 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NADCAP program utilizes third party assessments and surveys of contractor suppliers. The paper describes how nongovernment standards are used in developing actual operating criteria and procedures. Laboratory accreditation criteria from ASTM technical committees are utilized in developing working criteria for nondestructive testing (NDT), sealants, and other process and product areas. This program is an excellent example of using voluntary standards for effective surveillance in commerce.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP SURVEY CHECKLISTS FOR THE NDT SUPPLIERS ACCREDITATION PROGRAM written by Nadcap Management Council and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard includes the forms to be used by a third party to survey a nondestructive test facility with respect to penetrant, magnetic particle, ultrasonic, and/or radiographic methods.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard establishes the minimum requirements necessary for NADCAP accreditation of an Inspection System that meets, at a minimum, MIL-I-45208. These requirements may be supplemented by additional requirements at the discretion of the NADCAP General Quality Systems Task Group.It is the intent of this standard to provide a harmonized quality standard that meets MIL-I-45208, MIL-STD- 45662, and the relevant portions of MIL-STD-1520. In addition to meeting these requirements as a minimum, an attempt has been made to harmonize the requirements of MIL-Q and the ISO9000 series of standards. Where similar requirements existed between these two standards, the more stringent requirement was imposed.
Download or read book National Aerospace and Defense Contractors Accreditation Program NADCAP General Requirements for Materials Testing Laboratory Accreditation Program written by and published by . This book was released on 1997 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM written by Nadcap Management Council and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard establishes the minimum requirements for materials testing laboratories (MTL) accredited by NADCAP. The following test methods and processes for metallic material systems are covered in this standard. aChemical bMechanical cMetallography and Microhardness dHardness eCorrosion and Oxidation fMech. Test Specimen Preparation gDifferential Thermal Analysis hHeat Treat of Specimens iOther Non-Conventional/Engineering Tests jFastener Testing Slower quench rates tend to produce lower tensile strength in Quench + Temper and Solution + Age alloys. For example, properties of water quenched specimen material may not adequately represent oil or air quenched parts. (And in most cases, specimen material has less effective thickness -- hence a naturally faster cooling rate -- than the parts represented even when the same type quench is used.).
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM QUALITY PROGRAM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard establishes the minimum requirements necessary for NADCAP accreditation of a General Quality System the meets, at a minimum, MIL-Q-9858. These requirements may be supplemented by additional requirements at the discretion of the NADCAP General Quality Systems Task Group.It is the intent of this standard to provide a harmonized quality standard that meets MIL-Q-9858, MIL-STD-45662, and the relevant portions of MIL-STD-1520. In addition to meeting these requirements as a minimum, an attempt has been made to harmonize the requirements of MIL-Q and the ISO9000 series of standards. Where similar requirements existed between these two standards, the more stringent requirement was imposed.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP PROGRAM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) documents the requirements for implementing NADCAP industry consensus-based accreditation programs.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP REQUIREMENTS FOR ACCREDITATION OF PASS THRU DISTRIBUTORS written by Nadcap Management Council and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This aerospace standard outlines minimum quality assurance requirements common to commodities which must be met by a "PASS-THRU" distributor for third party accreditation.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP written by Nadcap Management Council and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard includes the forms to be used by a third party for auditing and on-going inspection for assessing the capability of sealant suppliers to furnish product to indicated standards.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for manufacturers of Fluid System Components to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Fluid System Components Task Group. Using the corrsponding Audit Criteria checklists (PRI ACs) will ensure that accredited Fluid System suppliers meet all of the requirements in this standard and all applicable supplementary standards.The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria are also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service. The information thus obtained will be used for determination of accreditation status, and may be used by the supplier to guide improvements in the product/service or associated processes.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONCONVENTIONAL MACHINING written by Nadcap Management Council and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for suppliers of Nonconventional Machining Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the NADCAP Nonconventional Machining and Surface Enhancement (NMSE) Task Group. Using the corresponding Audit Criteria (PRI AC7116) will ensure that accredited Nonconventional Machining suppliers meet all of the requirements in this standard and all applicable supplementary standards.The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria are also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service. This information will be used in the determination of accreditation status and may be used by the supplier to guide improvements in the product or service and the associated processes.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP GENERAL REQUIREMENTS FOR MATERIALS TESTING LABORATORY ACCREDITATION PROGRAM written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard establishes the minimum requirements for Materials Testing Laboratories (MTL) accredited by NADCAP. The following test methods and processes for metallic material systems are covered in this standard. aChemical Testing bMechanical Testing cMetallography and Microhardness dHardness eCorrosion fMechanical Testing Specimen Preparation gDifferential Thermal Analysis hHeat Treating iX-Ray Diffraction jFastener Testing Slower quench rates tend to produce lower tensile strength in Quench & Temper and Solution & Age alloys. For example, properties of water quenched specimen material may not adequately represent oil or air quenched parts. (In most cases, specimen material has less effective thickness -- hence a naturally faster cooling rate than the parts represented even when the same type quench is used.).
Download or read book National Aerospace and Defense Contractors Accreditation Program Requirements for Heat Treating written by Nadcap Management Council and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for Heat Treating Accreditation by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements specified by the NADCAP Heat Treating Task Group. Using the audit checklist (AC7102) will ensure that accredited heat treat suppliers meet all of the requirements in this standard and all applicable supplementary standards.All instructions, procedures, tests and inspection records, etc., referenced herein shall be in writing; distribution of instructions and procedures (including all revisions) shall be recorded and controlled.The NADCAP Heat Treating Task Group recognizes SAE AS7004, SAE AS7106, and SAE AS7107 as equivalent to the systems questions of this document as noted in the NADCAP Auditor Handbook. AS7102B is being cancelled and superseded by PRI AC7102. The requirements in the document have not changed.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FITTINGS AND OTHER MACHINED COMPONENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) is to be used as a supplement to SAE AS7112. In addition to the requirements contained in AS7112, the requirements contained herein shall apply to suppliers seeking NADCAP Fluid System Components Accreditation for Fittings and Other Machined Components.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR CHEMICAL PROCESSING written by Nadcap Management Council and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for suppliers of Chemical Processing Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Chemical Processes Task Group. Using the audit checklist (AC7108) will ensure that accredited Chemical Process suppliers meet all of the requirements in this standard and all applicable supplementary standards.
Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP RULES FOR IMPLEMENTATION written by Nadcap Management Council and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard establishes rules for the implementation of the National Aerospace and Defense Contractors Accreditation Program (NADCAP) to accredit the capability of suppliers furnishing processes, products, and services for the aerospace and defense industries as provided for in specific programs. These rules shall be in compliance with the latest issue of Aerospace Standard AS7003.
