Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for manufacturers of Fluid System Components to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Fluid System Components Task Group. Using the corrsponding Audit Criteria checklists (PRI ACs) will ensure that accredited Fluid System suppliers meet all of the requirements in this standard and all applicable supplementary standards.The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements. The corresponding audit criteria are also structured to obtain information relevant to management practices and processes that directly or indirectly affect the product or service. The information thus obtained will be used for determination of accreditation status, and may be used by the supplier to guide improvements in the product/service or associated processes.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FITTINGS AND OTHER MACHINED COMPONENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) is to be used as a supplement to SAE AS7112. In addition to the requirements contained in AS7112, the requirements contained herein shall apply to suppliers seeking NADCAP Fluid System Components Accreditation for Fittings and Other Machined Components.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM HOSE MANUFACTURING REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) is to be used as a supplement to SAE AS7112. In addition to the requirements contained in AS7112, the requirements contained herein shall apply to suppliers seeking NADCAP Fluid System Components Accreditation for Hose Manufacturer.Hose may be manufactured as a "Qualified" end item (bulk) or to be qualified as part of an assembly. The corresponding PRI Audit Criteria (AC) is to be applied to ensure the hose is manufactured to the applicable specification(s) and standard(s).

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR HOSE TUBE ASSEMBLY written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) is to be used as a supplement to SAE AS7112. In addition to the requirements contained in AS7112, the requirements contained herein shall apply to suppliers seeking NADCAP Fluid System Components Accreditation for Hose Assembly.Hose/tube assemblies may be qualified as being comprised of bulk qualified hose/tube and fittings. The purpose of this standard is to define requirements for audit qualification of the hose/tube assembly to an "assembly" procurement/performance specification. It addresses the fabrication of two or more components coupled by means of screwing, bolting, welding, brazing, swaging or crimping together to form an assembly to meet performance criteria - qualification.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard establishes the minimum requirements necessary for NADCAP accreditation of an Inspection System that meets, at a minimum, MIL-I-45208. These requirements may be supplemented by additional requirements at the discretion of the NADCAP General Quality Systems Task Group.It is the intent of this standard to provide a harmonized quality standard that meets MIL-I-45208, MIL-STD- 45662, and the relevant portions of MIL-STD-1520. In addition to meeting these requirements as a minimum, an attempt has been made to harmonize the requirements of MIL-Q and the ISO9000 series of standards. Where similar requirements existed between these two standards, the more stringent requirement was imposed.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM written by Nadcap Management Council and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard establishes the minimum requirements for materials testing laboratories (MTL) accredited by NADCAP. The following test methods and processes for metallic material systems are covered in this standard. aChemical bMechanical cMetallography and Microhardness dHardness eCorrosion and Oxidation fMech. Test Specimen Preparation gDifferential Thermal Analysis hHeat Treat of Specimens iOther Non-Conventional/Engineering Tests jFastener Testing Slower quench rates tend to produce lower tensile strength in Quench + Temper and Solution + Age alloys. For example, properties of water quenched specimen material may not adequately represent oil or air quenched parts. (And in most cases, specimen material has less effective thickness -- hence a naturally faster cooling rate -- than the parts represented even when the same type quench is used.).

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR CORRECTIVE ACTION AND DISPOSITION SYSTEM FOR NONCONFORMING MATERIAL written by Nadcap Management Council and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard is to be used as a supplement to either SAE AS7106 or SAE AS7107. This Standard is required for all suppliers seeking NADCAP General Quality Systems accreditation who have Material Review Board (MRB) authority. Suppliers seeking NADCAP General Quality Systems accreditation who are authorized by contract to conduct final MRB decisions shall comply with all of the requirements contained herein.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM QUALITY PROGRAM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard establishes the minimum requirements necessary for NADCAP accreditation of a General Quality System the meets, at a minimum, MIL-Q-9858. These requirements may be supplemented by additional requirements at the discretion of the NADCAP General Quality Systems Task Group.It is the intent of this standard to provide a harmonized quality standard that meets MIL-Q-9858, MIL-STD-45662, and the relevant portions of MIL-STD-1520. In addition to meeting these requirements as a minimum, an attempt has been made to harmonize the requirements of MIL-Q and the ISO9000 series of standards. Where similar requirements existed between these two standards, the more stringent requirement was imposed.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP REQUIREMENTS FOR ACCREDITATION OF PASS THROUGH DISTRIBUTORS written by Nadcap Management Council and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This aerospace standard outlines the minimum requirements for the quality assurance program of a distributor of new aircraft or aerospace parts and material. It is designed to aid in the surveillance and accreditation of a distributor who procures new parts and materials and resells these products to customers or other distributors in the aviation or aerospace industry, i.e., a PASS THROUGH distributor. This standard may be used to determine the adequacy and implementation of the distributor's quality assurance program.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP GENERAL REQUIREMENTS FOR MATERIALS TESTING LABORATORY ACCREDITATION PROGRAM written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard establishes the minimum requirements for Materials Testing Laboratories (MTL) accredited by NADCAP. The following test methods and processes for metallic material systems are covered in this standard. aChemical Testing bMechanical Testing cMetallography and Microhardness dHardness eCorrosion fMechanical Testing Specimen Preparation gDifferential Thermal Analysis hHeat Treating iX-Ray Diffraction jFastener Testing Slower quench rates tend to produce lower tensile strength in Quench & Temper and Solution & Age alloys. For example, properties of water quenched specimen material may not adequately represent oil or air quenched parts. (In most cases, specimen material has less effective thickness -- hence a naturally faster cooling rate than the parts represented even when the same type quench is used.).

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR CHEMICAL PROCESSING written by Nadcap Management Council and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) establishes the requirements for suppliers of Chemical Processing Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Chemical Processes Task Group. Using the audit checklist (AC7108) will ensure that accredited Chemical Process suppliers meet all of the requirements in this standard and all applicable supplementary standards.

Download or read book National Aerospace and Defense Contractors Accreditation Program NADCAP General Requirements for Materials Testing Laboratory Accreditation Program written by and published by . This book was released on 1997 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR PLATING OF COATED PARTS written by Nadcap Management Council and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) is to be used as a supplement to SAE AS7109. In addition to the requirements contained in AS7109, the requirements contained herein shall apply to suppliers seeking NADCAP Coatings accreditation who are engaged in plating of coated parts. Demonstrated compliance (as described in SAE AS7003) to SAE AS7108 satisfies the requirements contained herein.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP REQUIREMENTS FOR ACCREDITATION OF PASS THRU DISTRIBUTORS written by Nadcap Management Council and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This aerospace standard outlines minimum quality assurance requirements common to commodities which must be met by a "PASS-THRU" distributor for third party accreditation.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM QUALITY ASSURANCE PROGRAM REQUIREMENTS PROCUREMENT written by Nadcap Management Council and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard is to be used as a supplement to either SAE AS7106 or SAE AS7107 to demonstrate compliance to MIL-STD-1535. This Standard is required for all suppliers seeking NADCAP General Quality Systems accreditation who have contractual requirements to comply with MIL-STD-1535.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM NADCAP PROGRAM REQUIREMENTS written by Nadcap Management Council and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Aerospace Standard (AS) documents the requirements for implementing NADCAP industry consensus-based accreditation programs.

Download or read book NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR BRAZING written by Nadcap Management Council and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: