Download or read book Nasa s Hypersonic Research Engine Project written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-10 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the NASA Hypersonic Research Engine (HRE) Project, which began in 1964, were to design, develop, and construct a high-performance hypersonic research ramjet/scramjet engine for flight tests of the developed concept over the speed range of Mach 4 to 8. The project was planned to be accomplished in three phases: project definition, research engine development, and flight test using the X-15A-2 research airplane, which was modified to carry hydrogen fuel for the research engine. The project goal of an engine flight test was eliminated when the X-15 program was canceled in 1968. Ground tests of full-scale engine models then became the focus of the project. Two axisymmetric full-scale engine models, having 18-inch-diameter cowls, were fabricated and tested: a structural model and combustion/propulsion model. A brief historical review of the project, with salient features, typical data results, and lessons learned, is presented. An extensive number of documents were generated during the HRE Project and are listed. Andrews, Earl H. and Mackley, Ernest A. Langley Research Center...
Download or read book NASA s Hypersonic Research Engine Project A Review written by and published by . This book was released on 1994 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of NASA s Hypersonic Research Engine Project written by Earl H. Andrews and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA s Hypersonic Research Engine Project written by Earl H. Andrews and published by . This book was released on 1994 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enhancing U S Competitiveness written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Technology, Environment, and Aviation and published by . This book was released on 1994 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Facing the Heat Barrier written by T. A. Heppenheimer and published by Government Printing Office. This book was released on 2009-08 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hypersonics is the study of flight at speeds where aerodynamic heating dominates the physics of the problem. It is an engineering science with close links to supersonics and engine design. Within this field, many of the most important results have been experimental. The principal facilities have been wind tunnels and related devices, which have produced flows with speeds up to orbital velocity. Why is this important? Hypersonics has had two major applications. The first has been to provide thermal protection during atmospheric reentry. Success in this enterprise has supported ballistic-missile nose cones, has returned strategic reconnaissance photos from orbit and astronauts from the Moon, and has even dropped an instrument package into the atmosphere of Jupiter. The second application has involved high-speed propulsion and has sought to develop the scramjet as an advanced airbreathing ramjet. Atmospheric entry today is fully mature as an engineering discipline, but work with its applications continues to reach for new achievements. Studies of scramjets still seek full success, in which such engines can accelerate a vehicle without the use of rockets. Hence, there is much to do in this area as well.
Download or read book Hypersonic Airbreathing Propulsion written by William H. Heiser and published by AIAA. This book was released on 1994 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: An almost entirely self-contained engineering textbook primarily for use in undergraduate and graduate courses in airbreathing propulsion. It provides a broad and basic introduction to the elements needed to work in the field as it develops and grows. Homework problems are provided for almost every individual subject. An extensive array of PC-based user-friendly computer programs is provided in order to facilitate repetitious and/or complex calculations. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Analysis of experimental results of the inlet for the NASA hypersonic research engine aerothermodynamic integration model written by Earl H. Andrews and published by . This book was released on 1976 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonics Before the Shuttle A Concise History of the X 15 Research Airplane written by and published by . This book was released on 2000 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Testing of the NASA Hypersonic Project Combined Cycle Engine Testbed for Mode Transition Experiments written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-22 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA is interested in developing technology that leads to more routine, safe, and affordable access to space. Access to space using airbreathing propulsion systems has potential to meet these objectives based on Airbreathing Access to Space (AAS) system studies. To this end, the NASA Fundamental Aeronautics Program (FAP) Hypersonic Project is conducting fundamental research on a Turbine Based Combined Cycle (TBCC) propulsion system. The TBCC being studied considers a dual flow-path inlet system. One flow-path includes variable geometry to regulate airflow to a turbine engine cycle. The turbine cycle provides propulsion from take-off to supersonic flight. The second flow-path supports a dual-mode scramjet (DMSJ) cycle which would be initiated at supersonic speed to further accelerate the vehicle to hypersonic speed. For a TBCC propulsion system to accelerate a vehicle from supersonic to hypersonic speed, a critical enabling technology is the ability to safely and effectively transition from the turbine to the DMSJ-referred to as mode transition. To experimentally test methods of mode transition, a Combined Cycle Engine (CCE) Large-scale Inlet testbed was designed with two flow paths-a low speed flow-path sized for a turbine cycle and a high speed flow-path designed for a DMSJ. This testbed system is identified as the CCE Large-Scale Inlet for Mode Transition studies (CCE-LIMX). The test plan for the CCE-LIMX in the NASA Glenn Research Center (GRC) 10- by 10-ft Supersonic Wind Tunnel (10x10 SWT) is segmented into multiple phases. The first phase is a matrix of inlet characterization (IC) tests to evaluate the inlet performance and establish the mode transition schedule. The second phase is a matrix of dynamic system identification (SysID) experiments designed to support closed-loop control development at mode transition schedule operating points for the CCE-LIMX. The third phase includes a direct demonstration of controlled mode transition using a closed loop control system developed with the data obtained from the first two phases. Plans for a fourth phase include mode transition experiments with a turbine engine. This paper, focusing on the first two phases of experiments, presents developed operational and analysis tools for streamlined testing and data reduction procedures. Unspecified Center AIR FLOW; ENGINE INLETS; DYNAMIC TESTS; HYPERSONIC SPEED; PROPULSION SYSTEM CONFIGURATIONS; TURBINE ENGINES; SUPERSONIC WIND TUNNELS; SUPERSONIC FLIGHT
Download or read book Ramjet Engines written by Mikhail Makarovich Bondari͡u︡k and published by . This book was released on 1969 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Testing of the Nasa Hypersonic Project Combined Cycle Engine Testbed for Mode Transition Experiments written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-06 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA is interested in developing technology that leads to more routine, safe, and affordable access to space. Access to space using airbreathing propulsion systems has potential to meet these objectives based on Airbreathing Access to Space (AAS) system studies. To this end, the NASA Fundamental Aeronautics Program (FAP) Hypersonic Project is conducting fundamental research on a Turbine Based Combined Cycle (TBCC) propulsion system. The TBCC being studied considers a dual flow-path inlet system. One flow-path includes variable geometry to regulate airflow to a turbine engine cycle. The turbine cycle provides propulsion from take-off to supersonic flight. The second flow-path supports a dual-mode scramjet (DMSJ) cycle which would be initiated at supersonic speed to further accelerate the vehicle to hypersonic speed. For a TBCC propulsion system to accelerate a vehicle from supersonic to hypersonic speed, a critical enabling technology is the ability to safely and effectively transition from the turbine to the DMSJ-referred to as mode transition. To experimentally test methods of mode transition, a Combined Cycle Engine (CCE) Large-scale Inlet testbed was designed with two flow paths-a low speed flow-path sized for a turbine cycle and a high speed flow-path designed for a DMSJ. This testbed system is identified as the CCE Large-Scale Inlet for Mode Transition studies (CCE-LIMX). The test plan for the CCE-LIMX in the NASA Glenn Research Center (GRC) 10- by 10-ft Supersonic Wind Tunnel (10x10 SWT) is segmented into multiple phases. The first phase is a matrix of inlet characterization (IC) tests to evaluate the inlet performance and establish the mode transition schedule. The second phase is a matrix of dynamic system identification (SysID) experiments designed to support closed-loop control development at mode transition schedule operating points for the CCE-LIMX.
Download or read book Facing the Heat Barrier written by T. A. Heppenheimer and published by . This book was released on 2006 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hypersonics is the study of flight at speeds where aerodynamic heating dominates the physics of the problem. Typically this is Mach 5 and higher. Hypersonics is an engineering science with close links to supersonics and engine design. Within this field, many of the most important results have been experimental. The principal facilities have been wind tunnels and related devices, which have produced flows with speeds up to orbital velocity. Why is it important? Hypersonics has had two major applications. The first has been to provide thermal protection during atmospheric entry. Success in this enterprise has supported ballistic-missile nose cones, has returned strategic reconnaissance photos from orbit and astronauts from the Moon, and has even dropped an instrument package into the atmosphere of Jupiter. The last of these approached Jupiter at four times the speed of a lunar mission returning to Earth. Work with re-entry has advanced rapidly because of its obvious importance. The second application has involved high-speed propulsion and has sought to develop the scramjet as an advanced airbreathing ramjet. Scramjets are built to run cool and thereby to achieve near-orbital speeds. They were important during the Strategic Defense Initiative, when a set of these engines was to power the experimental X-30 as a major new launch vehicle. This effort fell short, but the X-43A, carrying a scramjet, has recently flown at Mach 9.65 by using a rocket. Atmospheric entry today is fully mature as an engineering discipline. Still, the Jupiter experience shows that work with its applications continues to reach for new achievements. Studies of scramjets, by contrast, still seek full success, in which such engines can accelerate a vehicle without the use of rockets. Hence, there is much to do in this area as well. For instance, work with computers may soon show just how good scramjets can become. NASA SP-2007-4232
Download or read book Space Shuttle Hypersonic Aerodynamic and Aerothermodynamic Flight Research and the Comparison to Ground Test Results written by Kenneth W. Iliff and published by . This book was released on 1993 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scramjet Propulsion written by E. T. Curran and published by AIAA. This book was released on 2001 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonics Before the Shuttle written by Dennis R. Jenkins and published by . This book was released on 2000 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Road to Mach 10 written by Curtis Peebles and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2008 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first full-length test-flight history of the X-43 project, written by the project historian at Dryden Flight Research Center. The project achieved the first in-flight testing of a scramjet engine, at speeds of nearly Mach 7 and Mach 10.
