Download or read book Carbon Nanotubes written by Silvana Fiorito and published by CRC Press. This book was released on 2019-04-30 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of C-nanoparticles toxicity is, at present, fragmented and contradictory, oscillating between enthusiastic raptures and bitter disappointments. This important book presents an overall, unitary view of the carbon nanoparticle world, in which both the positive and negative aspects of these recently discovered nanomaterials are critically de
Download or read book Carbon Nanotubes written by M. Meyyappan and published by CRC Press. This book was released on 2004-07-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in the past five years. With a broad range of potential applications including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more moti
Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
Download or read book Carbon Based Nanotubes written by Raúl Hernández Sánchez and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-21 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the chronological development of the synthetic approaches to make carbon nanotube mimics. It starts with the breakthrough syntheses reported in 2008 to the most recent methods to make nanobelts and short nanotubes.
Download or read book Carbon Nanotubes written by M. Endo and published by Elsevier. This book was released on 2013-10-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes have been studied extensively in relation to fullerenes, and together with fullerenes have opened a new science and technology field on nano scale materials.A whole range of issues from the preparation, structure, properties and observation of quantum effects in carbon nanotubes in comparison with 0-D fullerenes are discussed.In addition, complementary reviews on carbon nanoparticles such as carbon nano-capsules, onion-like graphite particles and metal-coated fullerenes are covered.This book aims to cover recent research and development in this area, and so provide a convenient reference tool for all researchers in this field. It is also hoped that this book can serve to stimulate future work on carbon nanotubes.
Download or read book Understanding Carbon Nanotubes written by Annick Loiseau and published by Springer. This book was released on 2006-08-29 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the foundations of carbon nanotube science, reviewing recent developments and prospects for practical application. Each chapter summarizes relevant concepts from physics, chemistry or materials science, followed by detailed reports on topics including polymorphism and mircostructure of carbon; synthesis and growth; structural analysis by electron microscopy; spectroscopic methods; electronic structure; transport; mechanical and surface properties of nanotubes and composites.
Download or read book Carbon Nanotubes and Related Structures written by Peter John Frederich Harris and published by Cambridge University Press. This book was released on 2001-10-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a 1999 book on carbon nanotubes, one of the most exciting areas in materials chemistry.
Download or read book Carbon Filaments and Nanotubes Common Origins Differing Applications written by L.P. Biró and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon filament, vapor grown carbon fibers and carbon nanotubes have been discovered to have remarkable properties, opening they way for their use in intriguing and novel applications in electronics, chemistry and materials science. There are many similarities between nanotubes and filaments, leading many researchers to critically compare the two materials, their production, and potential applications. The two materials are compared and contrasted in depth in the present book, which is a comprehensive review of current research activity, growth mechanisms, physical properties, industrial production, and applications. The structures are discussed using a unified approach, which helps to compare growth mechanisms, contrasting morphological differences, and detailing how novel properties depend on such differences.
Download or read book Industrial Applications of Carbon Nanotubes written by Huisheng Peng and published by William Andrew. This book was released on 2016-10-08 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of Carbon Nanotubes covers the current applications of carbon nanotubes in various industry sectors, from the military to visual display products, and energy harvesting and storage. It also assesses the opportunities and challenges for increased commercialization and manufacturing of carbon nanotubes in the years ahead. Real-life case studies illustrate how carbon nanotubes are used in each industry sector covered, providing a valuable resource for scientists and engineers who are involved and/or interested in carbon nanotubes in both academia and industry. The book serves as a comprehensive guide to the varied uses of carbon nanotubes for specialists in many related fields, including chemistry, physics, biology, and textiles. - Explains how carbon nanotubes can be used to improve the efficiency and performance of industrial products - Includes real-life case studies to illustrate how carbon nanotubes have been successfully employed - Explores how carbon nanotubes could be mass-manufactured in the future, and outlines the challenges that need to be overcome
Download or read book Carbon Nanotubes Quantum Cylinders of Graphene written by and published by Elsevier. This book was released on 2008-09-10 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to mostly to nanotubes, unique synthetic nanoscale quantum systems whose physical properties are often singular (i.e. record-setting). Nanotubes can be formed from a myriad of atomic or molecular species, the only requirement apparently being that the host material or “wall fabric be configurable as a layered or sheet-like structure. Nanotubes with sp2-bonded atoms such as carbon, or boron together with nitrogen, are the champions of extreme mechanical strength, electrical response (either highly conducting or highly insulating), and thermal conductance. Carbon nanotubes can be easily produced by a variety of synthesis techniques, and for this reason they are the most studied nanotubes, both experimentally and theoretically. Boron nitride nanotubes are much more difficult to produce and only limited experimental characterization data exist. Indeed, for boron nitride nanotubes, theory is well ahead of experiment. For these reasons this volume deals largely with carbon nanotubes. Conceptually, the "building block" for a carbon nanotube is a single sheet of graphite, called graphene. Recently, it has become possible to experimentally isolate such single sheets (either on a substrate or suspended). This capability has in turn fueled many new theoretical and experimental studies of graphene itself. It is therefore fitting that this volume contains also a chapter devoted to graphene. - Comprehension- Overview- Highlights in the field
Download or read book Carbon Nanotubes written by Mildred S. Dresselhaus and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a short introduction and a brief review of the relation between carbon nanotubes, graphite and other forms of carbon, the synthesis techniques and growth mechanisms for carbon nanotubes are described. This is followed by reviews on nanotube electronic structure, electrical, optical, and mechanical properties, nanotube imaging and spectroscopy, and nanotube applications.
Download or read book Carbon Nanotubes and Related Structures written by Dirk M. Guldi and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the most prominent experts and pioneers in the field, this ready reference combines fundamental research, recent breakthroughs and real-life applications in one well-organized treatise. As such, both newcomers and established researchers will find here a wide range of current methods for producing and characterizing carbon nanotubes using imaging as well as spectroscopic techniques. One major part of this thorough overview is devoted to the controlled chemical functionalization of carbon nanotubes, covering intriguing applications in photovoltaics, organic electronics and materials design. The latest research on novel carbon-derived structures, such as graphene, nanoonions and carbon pea pods, round off the book.
Download or read book Carbon Nanotubes written by Thomas W. Ebbesen and published by CRC Press. This book was released on 1996-10-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials are destined to become a discipline as distinct and important as polymers are in chemistry! With the realization that the structure of molecules such as C60 and C70 followed simple geometric principles, it became clear that a great variety of hollow, closed carbon structures, including nanotubes, could be made along the same principles. The modern nanotube can be thought of as the ultimate fiber formed of perfectly closed, seamless shells having unique features, such as mechanical and electronic properties that are very sensitive to its geometry and its dimensions. The nanotube has many uses:
Download or read book Nanowelded Carbon Nanotubes written by Changxin Chen and published by Springer Science & Business Media. This book was released on 2009-08-26 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a novel ultrasonic nanowelding technology of carbon nanotubes (CNTs) to metal electrodes and its application for CNT devices. It will be of interest to graduates, scientists and engineers working on CNTs and related topics.
Download or read book Science and Application of Nanotubes written by D. Tománek and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. - Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery - Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines - High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Carbon Nanotubes written by Stephanie Reich and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are exceptionally interesting from a fundamental research point of view. Many concepts of one-dimensional physics have been verified experimentally such as electron and phonon confinement or the one-dimensional singularities in the density of states; other 1D signatures are still under debate, such as Luttinger-liquid behavior. Carbon nanotubes are chemically stable, mechanically very strong, and conduct electricity. For this reason, they open up new perspectives for various applications, such as nano-transistors in circuits, field-emission displays, artificial muscles, or added reinforcements in alloys. This text is an introduction to the physical concepts needed for investigating carbon nanotubes and other one-dimensional solid-state systems. Written for a wide scientific readership, each chapter consists of an instructive approach to the topic and sustainable ideas for solutions. The former is generally comprehensible for physicists and chemists, while the latter enable the reader to work towards the state of the art in that area. The book gives for the first time a combined theoretical and experimental description of topics like luminescence of carbon nanotubes, Raman scattering, or transport measurements. The theoretical concepts discussed range from the tight-binding approximation, which can be followed by pencil and paper, to first-principles simulations. We emphasize a comprehensive theoretical and experimental understanding of carbon nanotubes including - general concepts for one-dimensional systems - an introduction to the symmetry of nanotubes - textbook models of nanotubes as narrow cylinders - a combination of ab-initio calculations and experiments - luminescence excitation spectroscopy linked to Raman spectroscopy - an introduction to the 1D-transport properties of nanotubes - effects of bundling on the electronic and vibrational properties and - resonance Raman scattering in nanotubes.
