Download or read book Nanostructured Immiscible Polymer Blends written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2019-09-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Immiscible Polymer Blends: Migration and Interface covers a wide range of nanoparticle types, emphasizing the mechanisms and parameters involved in the migration of nanofillers inside immiscible polymer blends. This book explores the influence of nanoparticle migration on the localization, and hence, morphology development, electrical conductivity, and met-rheological properties of blended composite materials. As the influence of solid particles, ranging in size from several hundred nanometers to a few microns in immiscible polymer blends has been extensively studied for use as compatibilizers, morphology stabilizers, and reinforcement agents, this book is a timely resource. - Outlines techniques used to prepare nanoparticles-modified immiscible polymer blend composites - Explains the structural and morphological development, and melt-state rheological behaviors of nanoparticles-modified immiscible polymer blend composites - Discusses major industrial applications

Download or read book Micro and Nanostructured Multiphase Polymer Blend Systems written by Charef Harrats and published by CRC Press. This book was released on 2005-09-29 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces focuses on the formation of phase morphology in polymer blends and copolymers and considers various types of blends including thermosets, thermoplastics, thermoplastic vulcanizates, and structured copolymers. The book carefully debates the processing

Download or read book Nanostructured Polymer Blends written by Sabu Thomas and published by William Andrew. This book was released on 2013-11-28 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 30% of commercial polymers are blends or alloys or one kind or another. Nanostructured blends offer the scientist or plastics engineer a new range of possibilities with characteristics including thermodynamic stablility; the potential to improve material transparency, creep and solvent resistance; the potential to simultaneously increase tensile strength and ductility; superior rheological properties; and relatively low cost. Nanostructured Polymer Blends opens up immense structural possibilities via chemical and mechanical modifications that generate novel properties and functions and high-performance characteristics at a low cost. The emerging applications of these new materials cover a wide range of industry sectors, encompassing the coatings and adhesives industry, electronics, energy (photovoltaics), aerospace and medical devices (where polymer blends provide innovations in biocompatible materials). This book explains the science of nanostructure formation and the nature of interphase formations, demystifies the design of nanostructured blends to achieve specific properties, and introduces the applications for this important new class of nanomaterial. All the key topics related to recent advances in blends are covered: IPNs, phase morphologies, composites and nanocomposites, nanostructure formation, the chemistry and structure of additives, etc. - Introduces the science and technology of nanostructured polymer blends – and the procedures involved in melt blending and chemical blending to produce new materials with specific performance characteristics - Unlocks the potential of nanostructured polymer blends for applications across sectors, including electronics, energy/photovoltaics, aerospace/automotive, and medical devices (biocompatible polymers) - Explains the performance benefits in areas including rheological properties, thermodynamic stablility, material transparency, solvent resistance, etc.

Download or read book Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems written by Sabu Thomas and published by William Andrew. This book was released on 2015-09-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. - Covers all important information for designing and selecting the right nanostructured polymer system - Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems - Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications - Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties

Download or read book Micro and Nano Fibrillar Composites MFCs and NFCs from Polymer Blends written by Raghvendra Kumar Mishra and published by Woodhead Publishing. This book was released on 2017-06-19 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends is a comprehensive reference for researchers, students and scientists working in the field of plastics recycling and composites. The book aims to determine the influence of micro and nanofibrillar morphology on the properties of immiscible blend systems. Chapters cover micro and nanofibrillar composites based on polyolefin, liquid crystal polymer, biodegradable polymers, polyester and polyamide blends in various industrial application fields. The book brings together panels of highly-accomplished experts in the field of plastics recycling, blends and composites systems. For several decades, plastic technology has played an important role in many industrial applications, such as packaging, automobiles, aerospace and construction. However the increasing use of plastics creates a lot of waste. This has led to restrictions on the use of some plastics for certain applications and a drive towards recycling of plastics. More recently, microfibrillar in-situ composites have been prepared from waste plastics such as PET/PP, PET/PE and Nylon/PP as a way of formulating new high performance polymer systems. This book tackles these issues and more, and is an ideal resource for anyone interested in polymer blends. - Provides information on MFC and NFC based polymer blends that have been accumulated over the last 25 years, providing a useful reference - Adopts a novel approach in terms of understanding the relationship between processing, morphology, structure, properties and applications in micro and nanofibrillar composites - Contains contributions from leading experts in the field from both industrial and academic research

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Sustainable Polylactide Based Blends written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2022-02-16 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Polylactide-Based Blends provides a critical overview of the state-of-the-art in polylactide (PLA)-based blends, addressing the latest advances, innovative processing techniques and fundamental issues that persist in the field. Sections cover the fundamentals of sustainable polymeric materials, polylactide and polymer blends, current and upcoming processing technologies, structure and morphology characterization techniques for PLA and PLA-based blends, and the processing, morphology development, and properties of polylactide-based blends. Final chapters focus on current and future applications, market potential, key challenges and future outlooks. Throughout the book, theoretical modeling of immiscible polymer blends helps to establish structure-property relationships in various PLA-based polymer blends. With in-depth coverage of fundamentals and processing techniques, the book aims to support the selection of each processing method, along with an understanding of surface chemistry to achieve improved compatibility between phases. - Explains fundamental aspects of polylactide-based blends, including characterization methods and property measurement techniques - Offers comprehensive and detailed coverage of processing, morphology and properties, all organized by blend material - Analyzes novel methods and addresses challenges associated with PLA-based blends, with a focus on applications and market potential

Download or read book Nanostructured Polymer Blends written by Juan Rodríguez-Hernández and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of polymer blends constitutes an interesting alternative to obtaining micro- and nanostructured surfaces. The cost is reasonable and it is free from time-consuming procedures. Blending of polymers can yield materials with unprecedented properties that cannot be provided otherwise by using a single polymer. The free surface topography of polymer blend films, often related to phase domain structure, is critical to the applications. Two main aspects need to be considered in the preparation of multistructured blends: the interfaces involved and the morphology to be obtained. The control of these two aspects depends further on materials-related parameters involving the composition of the blend, the interfacial tension or viscosity ratio, and the processing conditions related to the temperature, time, or intensity of mixing, among others. Both domain structure and topography of the blend films have garnered increasing interest over the past decade. This chapter describes the nanomicrostructures formed at the polymer surface from polymer blends. Despite the crucial role that surfaces play in the final application of the material, up to now most of the studies concerning polymer blends have been related to the control of the mechanical properties (toughness, stiffness, thermal expansion, etc.), their barrier properties, or the electrical conductivity. This chapter focuses on the analysis of the structured polymer surfaces and thin films, giving an overview of the role of these structures on the final application. The principles of phase separation and the resulting structures formed are briefly discussed, followed by a wide overview of the possibilities of producing stimuli-responsive interfaces by introducing, among other things, pH- or temperature-responsive polymers within the blend. Finally, we look at how using particular preparation conditions and/or self-assembly of block copolymers, the formation of films and surfaces with hierarchical order length-scales can be induced. We also examine the main areas in which multiscale-ordered interfaces obtained from polymer blends have been applied.

Download or read book Nanostructured Polymer Blends written by Emmanuel Rotimi Sadiku and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Great progress has been made in the science and technology of polymer-based nanomaterials over the last decade. Nanostructured polymer systems have attracted much scientific and applied research interest. The last two decades have witnessed significant advances in polymer science and technology generally, but more so for polymer blends. The idea of blending two (or more) polymers, especially immiscible blends, has come with a lot of challenges. Achieving this has brought to the fore the art and science (and engineering) of compatibilization. During the last few decades, the addition of nanoparticles, nanowires, nanotubes, and so on has advanced even further the creation of blends, alloys, and composites with different polymers. In making these blends, intermediaries such as compatibilizers, coupling agents, and other additives are often employed to bring about blends that are satisfactory for the purposes they are intended to serve. Nanostructured polymer blends formation has strongly improved the properties and structural integrities of polymer blends, by employing compatibilization as a tool to achieve such properties and structural integrities of polymer blends. Reinforcing compatibilized polymer blends with nanosize additives has further strengthened the properties and integrities of polymer blends, alloys, and composites.

Download or read book Crystallization in Multiphase Polymer Systems written by Sabu Thomas and published by Elsevier. This book was released on 2017-09-15 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization in Multiphase Polymer Systems is the first book that explains in depth the crystallization behavior of multiphase polymer systems. Polymeric structures are more complex in nature than other material structures due to their significant structural disorder. Most of the polymers used today are semicrystalline, and the subject of crystallization is still one of the major issues relating to the performance of semicrystalline polymers in the modern polymer industry. The study of the crystallization processes, crystalline morphologies and other phase transitions is of great significance for the understanding the structure-property relationships of these systems. Crystallization in block copolymers, miscible blends, immiscible blends, and polymer composites and nanocomposites is thoroughly discussed and represents the core coverage of this book. The book critically analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale. Various experimental techniques used for the characterization of polymer crystallization process are discussed. Written by experts in the field of polymer crystallization, this book is a unique source and enables professionals and students to understand crystallization behavior in multiphase polymer systems such as block copolymers, polymer blends, composites and nanocomposites. - Covers crystallization of multiphase polymer systems, including copolymers, blends and nanocomposites - Features comprehensive, detailed information about the basic research, practical applications and new developments for these polymeric materials - Analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale

Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field.

Download or read book Micro and Nanostructured Polymer Systems written by Sabu Thomas and published by CRC Press. This book was released on 2016-01-05 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the recent trends in micro- and nano-structured polymer systems, particularly natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. This valuable volume covers the occurrence, synthesis, isolation, production, properties and applications, modification, as well as the relevant analysis techniques t

Download or read book Micro and Nanostructured Multiphase Polymer Blend Systems written by Charef Harrats and published by CRC Press. This book was released on 2005-09-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces focuses on the formation of phase morphology in polymer blends and copolymers and considers various types of blends including thermosets, thermoplastics, thermoplastic vulcanizates, and structured copolymers. The book carefully debates the processing

Download or read book Compatibilization of Polymer Blends written by Ajitha A. R and published by Elsevier. This book was released on 2019-10-10 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compatibilization of Polymer Blends: Micro and Nano Scale Phase Morphologies, Interphase Characterization and Properties offers a comprehensive approach to the use of compatibilizers in polymer blends, examining both fundamental and advanced knowledge in the field. The book begins by introducing polymer blends, describing thermodynamics, miscibility, and phase separation, and explaining the main concepts of compatibilization. Other sections cover theoretical approaches for nearly compatible blends, incompatible blends, nanofillers, physical compatibilization, reactive compatibilization, morphological and structural characterization, and physico-mechanical characterization. Finally, key application areas are covered, including biomedical applications, packaging and automobile engineering. While this book will be a highly valuable reference source for academics, researchers and postgraduate students interested in polymer blends, it will also be ideal for anyone involved in the fields of polymer science, polymer chemistry, polymer physics, materials science, scientists, R&D professionals, and engineers in involved in the development or engineering of polymer products. - Offers detailed and systematic coverage of essential and advanced topics relating to the compatibilization of polymer blends - Presents a critical analysis of the effect of compatibilization on morphology and thermal, mechanical, electrical and viscoelastic properties of polymer blends - Draws on novel studies and state-of-the-art research, discussing the latest issues and developments

Download or read book Nanostructured Polymer Blends written by Roberto Scaffaro and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofillers can play two important roles in polymer blends. The first is the improvement of various properties such as mechanical, barrier, thermal, flame retardancy, and electrical properties. The second is the modification of miscibility/compatibility and morphology of polymer blends. The mechanism of action of nanoparticles to modify the morphology, interfacial properties, and performance of immiscible polymer blends relies on their localization, their interactions with polymer components, and the way these additives disperse within the polymer blend. The objective of this chapter is to review the research on nanofilled thermoplastic/thermoplastic polymer blends, paying particular attention both to the distribution of nanoparticles inside a binary polymer blend and to the effect of nanofillers on the morphology and on the properties of the thermoplastic polymer blends. In a large majority of cases, thermoplastic polymer blends filled with nanoparticles show better compatibility in terms of morphology size than pure blends. Moreover, the formation of a cocontinuous structure is promoted by the presence of the nanofiller.

Download or read book Rheology of Polymer Blends and Nanocomposites written by Sabu Thomas and published by Elsevier. This book was released on 2019-09-08 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology of Polymer Blends and Nanocomposites: Theory, Modelling and Applications focuses on rheology in polymer nanocomposites. It provides readers with a solid grounding in the fundamentals of rheology, with an emphasis on recent advancements. Chapters explore potential future applications for nanocomposites and polymer blends, giving readers a thorough understanding of the specific features derived from rheology as a tool for the study of polymer blends and nanocomposites. This book is ideal for industrial and academic researchers in the field of polymer blends and nanocomposites, but is also a great resource for anyone who wants to learn about the applications of rheology. - Sets out the principles of rheology as it is applied to polymer blends and nanocomposites - Demonstrates how rheological techniques are best applied to different classes of nanocomposites - Assesses the opportunities and major challenges of rheological approaches to polymer blends and nanocomposites

Download or read book Processing of Polymer based Nanocomposites written by Suprakas Sinha Ray and published by . This book was released on 2018 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processing of polymer nanocomposites usually requires special attention since the resultant structure-micro- and nano-level, is directly influenced by among other factors, polymer/nano-additive chemistry and the processing strategy. This book consolidates knowledge, from fundamental to product development, on polymer nanocomposites processing with special emphasis on the processing-structure-property-performance relationships in a wide range of polymer nanocomposites. Furthermore, this book focuses on emerging processing technologies such as electrospinning, which has very exciting applications ranging from medical to filtration. Additionally, the important role played by the nanoparticles in polymer blends structures has been illustrated in the current book, with special focus on fundamental aspects and properties of nanoparticles migration and interface crossing in immiscible polymer blend nanocomposites. This book focuses heavily on the processing technologies and strategies and extensively addresses the processing-structure-property-performance relationships in a wide range of polymer nanocomposites, such as commodity polymers (chapter 1), engineering polymers (chapter 2), elastomers (chapter 3), thermosets (chapter 4), biopolymers (chapter 5), polymer blends (chapter 6), and electrospun polymer (chapter 7). The important role played by nanoparticles in polymer blends structures in particular is illustrated. The book is useful to undergraduate and postgraduate students (polymer engineering, materials science & engineering, chemical & process engineering), as well as research & development personnel, engineers, and material scientists.