Download or read book Nanoscaled Films and Layers written by Laszlo Nanai and published by BoD – Books on Demand. This book was released on 2017-05-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, scientific investigations and technological developments have resulted in many new results. Direct applications of quantum mechanical laws to system with length scales lower than 100 nm (nano) had opened a way to construction of new equipment in the field f.e. of nano- and optoelectronics. This book fits into this trend summarizing the results related to discoveries and technological applications of nanolayer in different fields of material science and even life science. The chapters are organized into three subfields: 1) Preparation and fabrications of nanolayers with different methods. 2) Description of recent achievements related to very important III-V heterostructures. 3) Descriptions of mechanical, thermal, optoelectronic, photocatalytic, and tribological properties of nanolayered structures. Some environmentally friendly applications are also treated in this book. The presented book provides a description of specific and original results obtained by authors. We hope that the volume will be of interest for a wide range of readers working in the field of material science.
Download or read book Nanoscaled Films and Layers written by and published by . This book was released on 19?? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure and Properties of Micro and Nanoscale Materials Films and Coatings NAP 2019 written by Alexander D. Pogrebnjak and published by Springer Nature. This book was released on 2020-01-28 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of experimental and theoretical (including first-principles molecular dynamics simulation) studies of nanostructured and nanocomposite metal-based materials, and nanoscale multilayer coatings fabricated by physical or chemical vapor deposition, magnetron sputtering, electrospark alloying, ionic layer absorption, contact melting, and high-current electron beam irradiation. It also discusses novel methods of nanocomposite formation, as well as the structure of the deposited films, coatings and other nanoscale materials, their elemental and phase composition, and their physical–mechanical, tribological, magnetic and electrical properties. Lastly, it explores the influence of a various surface modification methods, such as thermal annealing, pulsed laser modification, and thermomechanical and ultrasonic treatment, as well as different properties of nanostructured films.
Download or read book Nanostructured Thin Films written by Maria Benelmekki and published by Elsevier. This book was released on 2019-08-25 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Thin Films: Fundamentals and Applications presents an overview of the synthesis and characterization of thin films and their nanocomposites. Both vapor phase and liquid phase approaches are discussed, along with the methods that are sufficiently attractive for large-scale production. Examples of applications in clean energy, sensors, biomedicine, anticorrosion and surface modification are also included. As the applications of thin films in nanomedicine, cell phones, solar cell-powered devices, and in the protection of structural materials continues to grow, this book presents an important research reference for anyone seeking an informed overview on their structure and applications. Shows how thin films are being used to create more efficient devices in the fields of medicine and energy harvesting Discusses how to alter the design of nanostructured thin films by vapor phase and liquid phase methods Explores how modifying the structure of thin films for specific applications enhances their performance
Download or read book Nanoscale structure forming processes written by Viktor Elofsson and published by Linköping University Electronic Press. This book was released on 2016-11-30 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film growth from the vapor phase has for a long time intrigued researchers endeavouring to unravel and understand atomistic surface processes that govern film formation. Their motivation has not been purely scientific, but also driven by numerous applications where this understanding is paramount to knowledge-based design of novel film materials with tailored properties. Within the above framework, this thesis investigates growth of metal films on weakly bonding substrates, a combination of great relevance for applications concerning e.g., catalysis, graphene metallization and architectural glazing. When metal vapor condenses on weakly bonding substrates three dimensional islands nucleate, grow and coalesce prior to forming a continuous film. The combined effect of these initial growth stages on film formation and morphology evolution is studied using pulsed vapor fluxes for the model system Ag/SiO2. It is shown that the competition between island growth and coalescence completion determines structure evolution. The effect of the initial growth stages on film formation is also examined for the tilted columnar microstructure obtained when vapor arrives at an angle that deviates from the substrate surface normal. This is done using two metals with distinctly different nucleation behaviour, and the findings suggest that the column tilt angle is set by nucleation conditions in conjunction with shadowing of the vapor flux by adjacent islands. Vapor arriving at an angle can in addition result in films that exhibit preferred crystallographic orientations, both out-of-plane and in-plane. Their emergence is commonly described by an evolutionary growth model, which for some materials predict a double in-plane alignment that has not been observed experimentally. Here, an experiment is designed to replicate the model’s growth conditions, confirming the existence of double in-plane alignment. New and added film functionalities can further be unlocked by alloying. Properties are then largely set by chemistry and atomic arrangement, where the latter can be affected by thermodynamics, kinetics and vapor flux modulation. Their combined effect on atomic arrangement is here unravelled by presenting a research methodology that encompasses high resolution vapor flux modulation, nanoscale structure v vi probes and growth simulations. The methodology is deployed to study the immiscible Ag-Cu and miscible Ag-Au model systems, for which it is shown that capping of Cu by Ag atoms via near surface diffusion processes and rough morphology of the Ag-Au growth front are the decisive structure forming processes in each respective system. The results generated in this thesis are of relevance for tuning structure of metal films grown on weakly bonding substrates. They also indicate that improved growth models are required to accurately describe structure evolution and emergence of a preferred in-plane orientation in films where vapor arrives at an angle that deviates from the substrate surface normal. In addition, this thesis presents a methodology that can be used to identify and understand structure forming processes in multicomponent films, which may enable tailoring of atomic arrangement and related properties in technologically relevant material systems.
Download or read book Nano Plating Microstructure Formation Theory of Plated Films and a Database of Plated Films written by T Watanabe and published by Elsevier. This book was released on 2004-03-05 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern plating technology is highly advanced, and has developed to cover a wide range of applications. In addition to the traditional use for surface finishing, plating technology can now offer novel processes to fabricate high-performance films or fine microstructural bodies in the microelectronics industry. This rapid progress reflects the potential for the electroplating plating method to become one of today's leading-edge technologies. This book will introduce a concept of a Microstructure Control Theory for plated films, describe and discuss various experimental results that support the theory, and finally, present a collection of experimental data on 53 types of plated metal/alloy systems with a special emphasis on their microstructure.The unique feature of this database is that most of the plating baths are simple and contain no additives. In addition, amorphous materials were used as substrates to avoid the effects of substrate structure, and single-crystal substrates were chosen to study the epitaxial growth phenomenon. * Contains a comprehensive database for the microstructure of plated films * The book is very logically structured with a very detailed contents which makes finding information easy * The book gives a very good overview of the research and development in this field and each chapter is fully referenced
Download or read book Layered 2D Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-04-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the discovery of graphene, two-dimensional layered materials (2DLMs) have been the central tool of the materials research community. The reason behind their importance is their superlative and unique electronic, optical, physical, chemical and mechanical properties in layered form rather than in bulk form. The 2DLMs have been applied to electronics, catalysis, energy, environment, and biomedical applications. The following topics are discussed in the book’s fifteen chapters: • The research status of the 2D metal-organic frameworks and the different techniques used to synthesize them. • 2D black phosphorus (BP) and its practical application in various fields. • Reviews the synthesis methods of MXenes and provides a detailed discussion of their structural characterization and physical, electrochemical and optical properties, as well as applications in catalysis, energy storage, environmental management, biomedicine, and gas sensing. • The carbon-based materials and their potential applications via the photocatalytic process using visible light irradiation. • 2D materials like graphene, TMDCs, few-layer phosphorene, MXene in layered form and their heterostructures. • The structure and applications of 2D perovskites. • The physical parameters of pristine layered materials, ZnO, transition metal dichalcogenides, and heterostructures of layered materials are discussed. • The coupling of graphitic carbon nitride with various metal sulfides and oxides to form efficient heterojunction for water purification. • The structural features, synthetic methods, properties, and different applications and properties of 2D zeolites. • The methods for synthesizing 2D hollow nanostructures are featured and their structural aspects and potential in medical and non-medical applications. • The characteristics and structural aspects of 2D layered double hydroxides (LDHs) and the various synthesis methods and role of LDH in non-medical applications as adsorbent, sensor, catalyst, etc. • The synthesis of graphene-based 2D layered materials synthesized by using top-down and bottom-up approaches where the main emphasis is on the hot-filament thermal chemical vapor deposition (HFTCVD) method. • The different properties of 2D h-BN and borophene and the various methods being used for the synthesis of 2D h-BN, along with their growth mechanism and transfer techniques. • The physical properties and current progress of various transition metal dichalcogenides (TMDC) based on photoactive materials for photoelectrochemical (PEC) hydrogen evolution reaction. • The state-of-the-art of 2D layered materials and associated devices, such as electronic, biosensing, optoelectronic, and energy storage applications.
Download or read book Grain size Effects in Nanoscaled Electrolyte and Cathode Thin Films for Solid Oxide Fuel Cells SOFC written by Christoph Peters and published by KIT Scientific Publishing. This book was released on 2009 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their high energy conversion efficiencies and low emissions, Solid Oxide Fuel Cells (SOFCs) show promise as a replacement for combustion-based electrical generators at all sizes. Further increase of SOFC efficiency can be achieved by microstructural optimization of the oxygen-ion conducting electrolyte and the mixed ionic-electronic conducting cathode. By application of nanoscaled thin films, the exceptionally high efficiency allows the realization of mobile SOFCs.
Download or read book Nano and mesoscale morphology evolution of metal films on weakly interacting surfaces written by Bo Lü and published by Linköping University Electronic Press. This book was released on 2018-01-11 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin films are structures consisting of one or several nanoscale atomic layers of material that are used to either functionalize a surface or constitute components in more complex devices. Many properties of a film are closely related to its microstructure, which allows films to be tailored to meet specific technological requirements. Atom-by-atom film growth from the vapor phase involves a multitude of atomic processes that may not be easily studied experimentally in real-time because they occur in small length- (? Å) and timescales (? ns). Therefore, different types of computer simulation methods have been developed in order to test theoretical models of thin film growth and unravel what experiments cannot show. In order to compare simulated and experimental results, the simulations must be able to model events on experimental time-scales, i.e. on the order of microseconds to seconds. This is achievable with the kinetic Monte Carlo (kMC) method. In this work, the initial growth stages of metal deposition on weakly-interacting substrates is studied using both kMC simulations as well as experiments whereby growth was monitored using in situ probes. Such film/substrate material combinations are widely encountered in technological applications including low-emissivity window coatings to parts of microelectronics components. In the first part of this work, a kMC algorithm was developed to model the growth processes of island nucleation, growth and coalescence when these are functions of deposition parameters such as the vapor deposition rate and substrate temperature. The dynamic interplay between these growth processes was studied in terms of the scaling behavior of the film thickness at the elongation transition, for both continuous and pulsed deposition fluxes, and revealed in both cases two distinct growth regimes in which coalescence is either active or frozen out during deposition. These growth regimes were subsequently confirmed in growth experiments of Ag on SiO2, again for both pulsed and continuous deposition, by measuring the percolation thickness as well as the continuous film formation thickness. However, quantitative agreement with regards to scaling exponents in the two growth regimes was not found between simulations and experiments, and this prompted the development of a method to determine the elongation transition thickness experimentally. Using this method, the elongation transition of Ag on SiO2 was measured, with scaling exponents found in much better agreement with the simulation results. Further, these measurement data also allowed the calculation of surface properties such as the terrace diffusion barrier of Ag on SiO2 and the average island coalescence rate. In the second part of this thesis, pioneering work is done to develop a fully atomistic, on-lattice model which describes the growth of Ag on weakly-interacting substrates. Simulations performed using this model revealed several key atomic-scale processes occurring at the film/substrate interface and on islands which govern island shape evolution, thereby contributing to a better understanding of how 3D island growth occurs at the atomic scale for a wide class of materials. The latter provides insights into the directed growth of metal nanostructures with controlled shapes on weakly-interacting substrates, including twodimensional crystals for use in catalytic and nano-electronic applications.
Download or read book Advanced Nanoscale ULSI Interconnects Fundamentals and Applications written by Yosi Shacham-Diamand and published by Springer Science & Business Media. This book was released on 2009-09-19 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Advanced ULSI interconnects – fundamentals and applications we bring a comprehensive description of copper-based interconnect technology for ultra-lar- scale integration (ULSI) technology for integrated circuit (IC) application. In- grated circuit technology is the base for all modern electronics systems. You can ?nd electronics systems today everywhere: from toys and home appliances to a- planes and space shuttles. Electronics systems form the hardware that together with software are the bases of the modern information society. The rapid growth and vast exploitation of modern electronics system create a strong demand for new and improved electronic circuits as demonstrated by the amazing progress in the ?eld of ULSI technology. This progress is well described by the famous “Moore’s law” which states, in its most general form, that all the metrics that describe integrated circuit performance (e. g. , speed, number of devices, chip area) improve expon- tially as a function of time. For example, the number of components per chip d- bles every 18 months and the critical dimension on a chip has shrunk by 50% every 2 years on average in the last 30 years. This rapid growth in integrated circuits te- nology results in highly complex integrated circuits with an increasing number of interconnects on chips and between the chip and its package. The complexity of the interconnect network on chips involves an increasing number of metal lines per interconnect level, more interconnect levels, and at the same time a reduction in the interconnect line critical dimensions.
Download or read book Heat Transport in Micro and Nanoscale Thin Films written by Bekir Sami Yilbas and published by Elsevier. This book was released on 2017-08-23 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transport in Micro- and Nanoscale Thin Films presents aspects and applications of the principle methods of heat transport in relation to nanoscale films. Small-scale parts and thin films are widely used in the electronics industry. However, the drastic change in the thermal conductivity with reducing device size and film thickness modifies the energy transport by heat-carrying phonons in the film. Energy transfer in small-sized devices and thin films deviate from the classical diffusion to radiative transport. This book deals with micro/nano scale heat transfer in small scale devices and the thin films, including interface properties of cross-plane transport. The book fills the gap between applications of the physical fundamentals and energy transport at the micro- and nano scale, which will be valuable for academics, researchers and students in the fields of materials science and energy transport Offers a specialist focus on nanoscale thin films, allowing the reader to create more efficient heat transfer systems Includes in-depth coverage of the formulation of transient energy transport for short durations of heating, which is valuable those working in electronics Focuses on applications and real-life case studies to clearly illustrate how the theories explained in the book can be used in industry
Download or read book The Mechanics and Reliability of Films Multilayers and Coatings written by Matthew R. Begley and published by Cambridge University Press. This book was released on 2017-03-24 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide variety of applications ranging from microelectronics to turbines for propulsion and power generation rely on films, coatings, and multilayers to improve performance. As such, the ability to predict coating failure - such as delamination (debonding), mud-cracking, blistering, crack kinking, and the like - is critical to component design and development. This work compiles and organizes decades of research that established the theoretical foundation for predicting such failure mechanisms, and clearly outlines the methodology needed to predict performance. Detailed coverage of cracking in multilayers is provided, with an emphasis on the role of differences in thermoelastic properties between the layers. The comprehensive theoretical foundation of the book is complemented by easy-to-use analysis codes designed to empower novices with the tools needed to simulate cracking; these codes enable not only precise quantitative reproduction of results presented graphically in the literature, but also the generation of new results for more complex multilayered systems.
Download or read book Multilayer Thin Films written by Gero Decher and published by John Wiley & Sons. This book was released on 2012-06-11 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second, comprehensive edition of the pioneering book in this fi eld has been completely revised and extended, now stretching to two volumes. The result is a comprehensive summary of layer-by-layer assembled, truly hybrid nanomaterials and thin fi lms, covering organic, inorganic, colloidal, macromolecular, and biological components, as well as the assembly of nanoscale fi lms derived from them on surfaces. These two volumes are essential for anyone working in the field, as well as scientists and researchers active in materials development, who needs the key knowledge provided herein for linking the field of molecular self-assembly with the bio- and materials sciences.
Download or read book Atomic Layer Deposition Applications 2 written by Ana Londergan and published by The Electrochemical Society. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue gives an overview of the cutting edge research in the various areas where Atomic Layer Deposition (ALD) can be used, enabling the identification of issues, challenges, and areas where further research is needed. Contributions include: Memory applications, Interconnects and contacts, ALD Productivity enhancement and precursor development, ALD for optical and photonic applications, and Applications in other areas, such as MEMs, nanotechnology, fabrication of sensors and catalysts, etc.
Download or read book Atomic Layer Deposition Fabrication of nanoscaled films and heterostructures from mono and bimetallic precursors written by Tessa Martine Leuning and published by . This book was released on 2014 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surfaces and Interfaces of Metal Oxide Thin Films Multilayers Nanoparticles and Nano composites written by Alejandro G. Roca and published by Springer Nature. This book was released on 2021-09-20 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general overview and current state of the art of different types of metal oxide nanomaterials, either in nanoparticles or thin film structure. It covers from the development and optimization of different nanofabrication/synthesis techniques for nanostructures which are currently the attention of the research community, the study of the structure and interactions by different characterization techniques of heterostructured materials and the final impact in different applications such as nanotherapy, data storage, super magnets, high-frequency devices. The book’s 13 chapters provide deep insight into the intriguing science of oxide materials and include contributions on novel technologies to fabricate nanomaterials with a broad range of functional properties (semiconducting, magnetic, ferroelectric, thermoelectric, optical, flexible and mechanical). This book is intended to the experts for consolidation of their knowledge but also for students who aim to learn and get basics of nanostructured metal oxides in diverse forms.
Download or read book The Nano Micro Interface written by Marcel Van de Voorde and published by John Wiley & Sons. This book was released on 2015-01-12 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the properties of materials by modifying their composition and by manipulating the arrangement of atoms and molecules is a dream that can be achieved by nanotechnology. As one of the fastest developing and innovative -- as well as well-funded -- fields in science, nanotechnology has already significantly changed the research landscape in chemistry, materials science, and physics, with numerous applications in consumer products, such as sunscreens and water-repellent clothes. It is also thanks to this multidisciplinary field that flat panel displays, highly efficient solar cells, and new biological imaging techniques have become reality. This second, enlarged edition has been fully updated to address the rapid progress made within this field in recent years. Internationally recognized experts provide comprehensive, first-hand information, resulting in an overview of the entire nano-micro world. In so doing, they cover aspects of funding and commercialization, the manufacture and future applications of nanomaterials, the fundamentals of nanostructures leading to macroscale objects as well as the ongoing miniaturization toward the nanoscale domain. Along the way, the authors explain the effects occurring at the nanoscale and the nanotechnological characterization techniques. An additional topic on the role of nanotechnology in energy and mobility covers the challenge of developing materials and devices, such as electrodes and membrane materials for fuel cells and catalysts for sustainable transportation. Also new to this edition are the latest figures for funding, investments, and commercialization prospects, as well as recent research programs and organizations.
