Download or read book Nanomaterials and Surface Engineering written by Jamal Takadoum and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of topics that address the main areas of interest to scientists, engineers, and students concerned with the synthesis, characterization and applications of nanomaterials. Development techniques, properties, and examples of industrial applications are all widely represented as they apply to various nanostructured materials including nanocomposites and multilayered nanometric coatings. The book also illustrates a wide range of powerful methods of nanomaterial/nanostructure synthesis such as microwave-assisted methods, pulsed electrodeposition, ion beams, or glancing angle deposition. Techniques for the encapsulation and functionalization of nanoparticles, as well as the adhesion and mechanical characterization of nanostructured thin films, are also described and discussed. It is to be recommended to anyone working in the field of nanomaterials, especially in connection with the functionalization and engineering of surfaces.
Download or read book Surface Engineering and Functional Nanomaterials for Point of Care Analytical Devices written by Buddhadev Purohit and published by Springer Nature. This book was released on 2023-09-22 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the role of advanced nanomaterials and surface engineering technologies in the development of point-of-care biosensors for health and environmental monitoring. All aspects of nanomaterial synthesis and characterization, functionalization methods, sensing surface engineering, signal amplification strategies, use of innovative technologies to enhance sensor efficiency and performances, and innovative applications of nanobiosensors to tackle real-life problems are discussed in this book with a focus on optical and electrochemical based sensing. It also covers the detection of infectious diseases and various disease biomarkers, smartphone-based biosensing, and portable diagnostics module developments with a discussion on the working mechanisms of these devices in various domains. The book also illustrates the recent trends in biosensing, and an overview of the challenges and probable solutions for the translation of biosensors from laboratory prototypes to commercial success.
Download or read book Surface Engineering written by Ashok Kumar and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings from the 2002 TMS Annual Meeting address the scientific issues related to surface engineering phenomenon in synthesis, characterization, and application for all materials. This collection of papers provides a multidisciplinary discussion on surface-related phenomena by which materials performance may be enhanced through engineered interfaces and surface modification technologies. Applied experimental and theoretical aspects that highlight, develop, and utilize approaches to understand and improve surface phenomena are also included. A collection of papers from the 2002 TMS Annual Meeting and Exhibition held in Seattle, Washington, February 17-21, 2002.
Download or read book Surface Engineering written by Minerals, Metals and Materials Society. Materials Processing and Manufacturing Division and published by Wiley-TMS. This book was released on 2002-02 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings from the 2002 TMS Annual Meeting address the scientific issues related to surface engineering phenomenon in synthesis, characterization, and application for all materials. This collection of papers provides a multidisciplinary discussion on surface-related phenomena by which materials performance may be enhanced through engineered interfaces and surface modification technologies. Applied experimental and theoretical aspects that highlight, develop, and utilize approaches to understand and improve surface phenomena are also included. A collection of papers from the 2002 TMS Annual Meeting and Exhibition held in Seattle, Washington, February 17-21, 2002.
Download or read book Bio Inspired Nanomaterials in Surface Engineering and Bioapplications written by Zhong Feng Gao and published by Frontiers Media SA. This book was released on 2022-04-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Surface Engineering Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-09-14 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced surfaces enriches the high-throughput engineering of physical and chemical phenomenon in relatin to electrical, magnetic, electronics, thermal and optical controls, as well as large surface areas, protective coatings against water loss and excessive gas exchange. A more sophisticated example could be a highly selective surface permeability allowing passive diffusion and selective transport of molecules in the water or gases. The smart surface technology provides an interlayer model which prevents the entry of substances without affecting the properties of neighboring layers. A number of methods have been developed for coatings, which are essential building blocks for the top-down and/or bottom-up design of numerous functional materials. Advanced Surface Engineering Materials offers a detailed up-to-date review chapters on the functional coatings and adhesives, engineering of nanosurfaces, high-tech surface, characterization and new applications. The 13 chapters in this book are divided into 3 parts (Functional coatings and adhesives; Engineering of nanosurfaces; High-tech surface, characterization and new applications) and are all written by worldwide subject matter specialists. The book is written for readers from diverse backgrounds across chemistry, physics, materials science and engineering, medical science, environmental, bio- and nano- technologies and biomedical engineering. It offers a comprehensive view of cutting-edge research on surface engineering materials and their technological importance.
Download or read book Advanced Surface Engineering Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-09-06 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced surfaces enriches the high-throughput engineering of physical and chemical phenomenon in relatin to electrical, magnetic, electronics, thermal and optical controls, as well as large surface areas, protective coatings against water loss and excessive gas exchange. A more sophisticated example could be a highly selective surface permeability allowing passive diffusion and selective transport of molecules in the water or gases. The smart surface technology provides an interlayer model which prevents the entry of substances without affecting the properties of neighboring layers. A number of methods have been developed for coatings, which are essential building blocks for the top-down and/or bottom-up design of numerous functional materials. Advanced Surface Engineering Materials offers a detailed up-to-date review chapters on the functional coatings and adhesives, engineering of nanosurfaces, high-tech surface, characterization and new applications. The 13 chapters in this book are divided into 3 parts (Functional coatings and adhesives; Engineering of nanosurfaces; High-tech surface, characterization and new applications) and are all written by worldwide subject matter specialists. The book is written for readers from diverse backgrounds across chemistry, physics, materials science and engineering, medical science, environmental, bio- and nano- technologies and biomedical engineering. It offers a comprehensive view of cutting-edge research on surface engineering materials and their technological importance.
Download or read book Corrosion Protection and Control Using Nanomaterials written by V S Saji and published by Elsevier. This book was released on 2012-02-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is an expensive and potentially dangerous problem in many industries. The potential application of different nanostructured materials in corrosion protection, prevention and control is a subject of increasing interest. Corrosion protection and control using nanomaterials explores the potential use of nanotechnology in corrosion control.The book is divided into two parts. Part one looks at the fundamentals of corrosion behaviour and the manufacture of nanocrystalline materials. Chapters discuss the impact of nanotechnology in reducing corrosion cost, and investigate the influence of various factors including thermodynamics, kinetics and grain size on the corrosion behaviour of nanocrystalline materials. There are also chapters on electrodeposition and the corrosion behaviour of electrodeposited nanocrystalline materials. Part two provides a series of case studies of applications of nanomaterials in corrosion control. Chapters review oxidation protection using nanocrystalline structures at various temperatures, sol- gel and self-healing nanocoatings and the use of nanoreservoirs and polymer nanocomposites in corrosion control.With its distinguished editors and international team of expert contributors, Corrosion protection and control using nanomaterials is an invaluable reference tool for researchers and engineers working with nanomaterials in a variety of industries including, aerospace, automotive and chemical engineering as well as academics studying the unique protection and control offered by nanomaterials against corrosion. - Explores the potential use of nanotechnology and nanomaterials for corrosion prevention, protection and control - Discusses the impact of nanotechnology in reducing corrosion cost and investigates various factors on the corrosion behaviour of nanocrystalline materials - Provides a series of case studies and applications of nanomaterials for corrosion control
Download or read book Surface Modified Nanomaterials for Applications in Catalysis written by Manoj B. Gawande and published by Elsevier. This book was released on 2022-05-22 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Modified Nanomaterials for Applications in Catalysis: Fundamentals, Methods and Applications provides an overview of the different state-of-the-art surface modification methods of nanomaterials and their commercial applications. The main objective of this book is to comprehensively cover the modification of nanomaterial and their fabrication, including different techniques and discussions of present and emerging commercial applications. The book addresses fundamental chemistry concepts as applied to the modification of nanomaterials for applications in energy, catalysis, water remediation, sensors, and more. Characterization and fabrication methodologies are reviewed, along with the challenges of up-scaling of processes for commercial applications. This book is suitable for academics and practitioners working in materials science, engineering, nanotechnology, green chemistry and chemical engineering. Provides an overview of the basic principles of surface modification of nanomaterials Reviews useful fabrication and characterization methodologies for key applications Addresses surface modified nanomaterials for applications in catalysis, energy, sensor, environment, and more
Download or read book Cell Surface Engineering written by Rawil Fakhrullin and published by Royal Society of Chemistry. This book was released on 2014-07-24 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: A summary of the recent achievements in surface-functionalised cells including fabrication, characterisation, applications and nanotoxicity.
Download or read book Synthesis and Surface Engineering Towards Complex Nanomaterials written by Ryan Kastilani and published by . This book was released on 2019 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the self-cleaning properties of the lotus leaf to smartphones that have hundreds of millions times more processing power than computers that sent mankind to the moon, the importance of nanotechnology is beyond dispute. Throughout the last couple of decades, the ever increasing demand for technology have driven not only the quest for new nanomaterials, but also efficient ways to produce them. In this work, novel methods towards producing complex nanomaterials is presented: from molecules to product. In the first part, a method to synthesize quantum dots (QD) from molecular precursors using ultrasound, in an emulsion system under controlled temperature, is presented. This method offers remarkable temporal control, leading to on-demand synthesis of QDs, and has 10x production capacity compared to the typical single-phase sonochemical synthesis of QDs. In the second part, a general bottom-up method to assemble two different kinds of nanoparticles together by engineering the nanoparticle surface is presented, which opens the path towards scalable production of multifunctional nanomaterials. Finally, a specific application of surface engineering and particle assembly is demonstrated in the context of reducing the brittleness of ceramic membranes for energy storage applications.
Download or read book Self Organization During Friction written by German Fox-Rabinovich and published by CRC Press. This book was released on 2006-09-18 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: In our present era of nanoscience and nanotechnology, new materials are poised to take center stage in dramatically improving friction and wear behavior under extreme conditions. Compiled by two eminent experts, Self-Organization During Friction: Advanced Surface-Engineered Materials and Systems Design details the latest advances and developments i
Download or read book International Journal of Surface Engineering and Interdisciplinary Materials Science IJSEIMS written by J. Paulo Davim and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanomaterials For Energy Conversion And Storage written by Dunwei Wang and published by World Scientific. This book was released on 2017-11-10 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of nanomaterials in energy conversion and storage represents an opportunity to improve the performance, density and ease of transportation in renewable resources. This book looks at the most recent research on the topic, with particular focus on artificial photosynthesis and lithium-ion batteries as the most promising technologies to date. Research on the broad subject of energy conversion and storage calls for expertise from a wide range of backgrounds, from the most fundamental perspectives of the key catalytic processes at the molecular level to device scale engineering and optimization. Although the nature of the processes dictates that electrochemistry is a primary characterization tool, due attention is given to advanced techniques such as synchrotron studies in operando. These studies look at the gap between the performance of current technology and what is needed for the future, for example how to improve on the lithium-ion battery and to go beyond its capabilities.Suitable for students and practitioners in the chemical, electrochemical, and environmental sciences, Nanomaterials for Energy Conversion and Storage provides the information needed to find scalable, economically viable and safe solutions for sustainable energy.
Download or read book Surface Engineering written by R.S. Walia and published by CRC Press. This book was released on 2022-12-19 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is considered an important aspect in the reduction of friction and wear. This reference text discusses a wide range of surface engineering technologies along with applications in a comprehensive manner. The book describes various methods in surface engineering technology with a thorough explanation of various aspects of each process that comes under this domain. Apart from an enhanced explanation of the process and its attributes, this book also gives insight into the types of materials, applications, and optimization of surface engineering techniques. It discusses important topics including surface engineering of the functionality of graded materials, materials characterization, processing of biomaterials, design, surface modification technologies and process control, smart manufacturing, artificial intelligence, and machine learning applications. The book: discusses computational and simulation analyses for better selection of process parameters covers optimizations of processes with state-of-the-art technologies discusses applications of surface engineering in medical, agricultural, architecture engineering, and allied sectors covers processing techniques of biomaterials in surface engineering The text is useful for senior undergraduate, graduate students, and academic researchers working in diverse areas such as industrial and production engineering, mechanical engineering, materials science, and manufacturing science. It covers a hybrid process for surface modification, modeling techniques, and issues in surface engineering.
Download or read book Nanoscale Engineering of Biomaterials Properties and Applications written by Lalit M. Pandey and published by Springer Nature. This book was released on 2022-02-16 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in a wide range of biomaterials for the development of smart and advanced functional materials. It discusses the fundamentals of bio-interfacial interactions and the surface engineering of emerging biomaterials like metals and alloys, polymers, ceramics, and composites/nanocomposites. In turn, the book addresses the latest techniques and approaches to engineering material surfaces/interfaces in, e.g., implants, tissue engineering, drug delivery, antifouling, and dentistry. Lastly, it summarizes various challenges in the design and development of novel biomaterials. Given its scope, it offers a valuable source of information for students, academics, physicians and particularly researchers from diverse disciplines such as material science and engineering, polymer engineering, biotechnology, bioengineering, chemistry, chemical engineering, nanotechnology, and biomedical engineering for various commercial and scientific applications.
Download or read book Microwave Engineering of Nanomaterials written by Erwann Guenin and published by CRC Press. This book was released on 2016-03-30 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of microwaves has gradually democratized itself in several scientific areas and is now a common methodology in domains as different as chemistry, protein digestion, mining, and metallurgy. Materials chemistry is one field where microwave irradiation technologies are being studied. In recent years, development of nanotechnologies has increas
