Download or read book Nanomanufacturing Handbook written by Ahmed Busnaina and published by CRC Press. This book was released on 2017-12-19 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Breakthroughs in nanotechnology have been coming at a rapid pace over the past few years. This was fueled by significant worldwide investments by governments and industry. But if these promising young technologies cannot begin to show commercial viability soon, that funding is in danger of disappearing as investors lose their appetites and the economic and scientific promise of nanotechnology may not be realized. Scrutinizing the barriers to commercial scale-up of nanotechnologies, the Nanomanufacturing Handbook presents a broad survey of the research being done to bring nanotechnology out of the laboratory and into the factory. Current research into nanotechnology focuses on the underlying science, but as this forward-looking handbook points out, the immediate need is for research into scale-up, process robustness, and system integration issues. Taking that message to heart, this book collects cutting-edge research from top experts who examine such topics as surface-programmed assembly, fabrication and applications of single-walled carbon nanotubes (SWNTs) including nanoelectronics, manufacturing nanoelectrical contacts, room-temperature nanoimprint and nanocontact technologies, nanocontacts and switch reliability, defects and surface preparation, and other innovative, application-driven initiatives. In addition to these technical issues, the author provides a survey of the current state of nanomanufacturing in the United States—the first of its kind—and coverage also reaches into patenting nanotechnologies as well as regulatory and societal issues. With timely, authoritative coverage accompanied by numerous illustrations, the Nanomanufacturing Handbook clarifies the current challenges facing industrial-scale nanotechnologies and outlines advanced tools and strategies that will help overcome them.

Download or read book Handbook of Nanofabrication written by and published by Academic Press. This book was released on 2010-05-25 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. - Includes chapters covering the most important Nanofabrication techniques, which aids comprehensive understanding of the latest manufacturing technologies encountered in the field of nano-level manufacturing which is essential for preparing for advanced study and application in nanofabrication techniques by enabling thorough understanding of the entire nanofabrication process as it applies to advanced electronic and related manufacturing technologies - Each chapter covers a nanofabrication technique comprehensively, which allows the reader to learn to produce nanometer-level products as well as collect, process, and analyze data, improve process parameters, and how to assist engineers in research, development and manufacture of the same - Includes contributions from recognized experts from around the globe, making the reader aware of variations in similar techniques applied in different geographical locations and is better positioned to establish all possible global applications

Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.

Download or read book Handbook of Nanomaterials for Manufacturing Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2020-04-12 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanomaterials for Manufacturing Applications covers the challenges and obstacles involved in using nanomaterials in manufacturing. In particular, the lack of information, the possibility of adverse impacts on the environment, human health, safety and sustainability and other remaining challenges. This book addresses these challenges for the use of nanomaterials in major manufacturing sectors and suggests how they may be overcome. It was written to summarize, in a one-stop, concise manner, how nanomaterials and nanotechnology are being used to enhance current manufacturing techniques and processes in order to create more sustainable products in a range of industry sectors. This book will be of great use to materials scientists and engineers who are looking to gain a greater understanding on how nanotechnology is being used to improve the products we use in our daily lives. - Demonstrates how cutting-edge developments in nanomaterials are being used to make more efficient manufacturing processes in a range of industry sectors - Explores how using nanomaterials can help engineers create innovative consumer products - Discusses the legal, economic and toxicity issues arising from using nanomaterials in manufacturing processes

Download or read book Nanofabrication Handbook written by Stefano Cabrini and published by CRC Press. This book was released on 2012-02-24 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books are dedicated to individual aspects of nanofabrication, there is no single source that defines and explains the total vision of the field. Filling this gap, Nanofabrication Handbook presents a unique collection of new and the most important established approaches to nanofabrication. Contributors from leading research facilities and academic institutions around the world define subfields, offer practical instructions and examples, and pave the way for future research. Helping readers to select the proper fabricating technique for their experiments, the book provides a broad vision of the most critical problems and explains how to solve them. It includes basic definitions and introduces the main underlying concepts of nanofabrication. The book also discusses the major advantages and disadvantages of each approach and offers a wide variety of examples of cutting-edge applications. Each chapter focuses on a particular method or aspect of study. For every method, the contributors describe the underlying theoretical basis, resolution, patterns and substrates used, and applications. They show how applications at the nanoscale require a different process and understanding than those at the microscale. For each experiment, they elucidate key solutions to problems relating to materials, methods, and surface considerations. A complete resource for this rapidly emerging interdisciplinary field, this handbook provides practical information for planning the experiments of any project that employs nanofabrication techniques. It gives readers a foundation to enter the complex world of nanofabrication and inspires the scientific community at large to push the limits of nanometer resolution.

Download or read book Nano and Molecular Electronics Handbook written by Sergey Edward Lyshevski and published by CRC Press. This book was released on 2018-10-03 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are fundamental and technological limits of conventional microfabrication and microelectronics. Scaling down conventional devices and attempts to develop novel topologies and architectures will soon be ineffective or unachievable at the device and system levels to ensure desired performance. Forward-looking experts continue to search for new paradigms to carry the field beyond the age of microelectronics, and molecular electronics is one of the most promising candidates. The Nano and Molecular Electronics Handbook surveys the current state of this exciting, emerging field and looks toward future developments and opportunities. Molecular and Nano Electronics Explained Explore the fundamentals of device physics, synthesis, and design of molecular processing platforms and molecular integrated circuits within three-dimensional topologies, organizations, and architectures as well as bottom-up fabrication utilizing quantum effects and unique phenomena. Technology in Progress Stay current with the latest results and practical solutions realized for nanoscale and molecular electronics as well as biomolecular electronics and memories. Learn design concepts, device-level modeling, simulation methods, and fabrication technologies used for today's applications and beyond. Reports from the Front Lines of Research Expert innovators discuss the results of cutting-edge research and provide informed and insightful commentary on where this new paradigm will lead. The Nano and Molecular Electronics Handbook ranks among the most complete and authoritative guides to the past, present, and future of this revolutionary area of theory and technology.

Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.

Download or read book Handbook of Nanomaterials for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2018-07-19 with total page 1143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanomaterials for Industrial Applications explores the use of novel nanomaterials in the industrial arena. The book covers nanomaterials and the techniques that can play vital roles in many industrial procedures, such as increasing sensitivity, magnifying precision and improving production limits. In addition, the book stresses that these approaches tend to provide green, sustainable solutions for industrial developments. Finally, the legal, economical and toxicity aspects of nanomaterials are covered in detail, making this is a comprehensive, important resource for anyone wanting to learn more about how nanomaterials are changing the way we create products in modern industry. - Demonstrates how cutting-edge developments in nanomaterials translate into real-world innovations in a range of industry sectors - Explores how using nanomaterials can help engineers to create innovative consumer products - Discusses the legal, economical and toxicity issues arising from the industrial applications of nanomaterials

Download or read book The ELSI Handbook of Nanotechnology written by Chaudhery Mustansar Hussain and published by John Wiley & Sons. This book was released on 2020-05-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook focuses on the recent advancements in Safety, Risk, Ethical Society and Legal Implications (ESLI) as well as its commercialization of nanotechnology, such as manufacturing. Nano is moving out of its relaxation phase of scientific route, and as new products go to market, organizations all over the world, as well as the general public, are discussing the environmental and health issues associated with nanotechnology. Nongovernmental science organizations have long since reacted; however, now the social sciences have begun to study the cultural portent of nanotechnology. Societal concerns and their newly constructed concepts, show nanoscience interconnected with the economy, ecology, health, and governance. This handbook addresses these new challenges and is divided into 7 sections: Nanomaterials and the Environment; Life Cycle Environmental Implications of Nanomanufacturing; Bioavailability and Toxicity of Manufactured Nanoparticles in Terrestrial Environments; Occupational Health Hazards of Nanoparticles; Ethical Issues in Nanotechnology; Commercialization of Nanotechnology; Legalization of Nanotechnology.

Download or read book The Handbook of Nanotechnology written by John C. Miller and published by Wiley. This book was released on 2004-11-11 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first attempt to fully explore the controversial issues associated with the commercial application of nanotechnology, you'll find a thorough analysis of intellectual property and patents, financing and legal concerns, regulatory measures particularly in the field of nanomedicine, and environmental regulations. The authors include a set of guideposts you can follow in your due diligence of the business and legal issues pertaining to the technology.

Download or read book Microfabrication and Nanomanufacturing written by Mark J. Jackson and published by CRC Press. This book was released on 2005-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.

Download or read book Handbook of Nanoscience Engineering and Technology written by William A. Goddard III and published by CRC Press. This book was released on 2002-10-29 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, science, and engineering spearhead the 21st century revolution that is leading to fundamental breakthroughs in the way materials, devices, and systems are understood, designed, made, and used. With contributions from a host of world-class experts and pioneers in the field, this handbook sets forth the fundamentals of nanoelectromechanical systems (NEMS), studies their fabrication, and explores some of their most promising applications. It provides comprehensive information and references for nanoscale structures, devices, and systems, molecular technology and nanoelectromechanical theory, and promises to become a standard reference for the field.

Download or read book Handbook Of Synthetic Methodologies And Protocols Of Nanomaterials In 4 Volumes written by and published by World Scientific. This book was released on 2019-08-13 with total page 2370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book set includes four volumes, covering the methods and protocols for the synthesis, fabrication, and characterization of nanomaterials. The first two books introduce the solution phase and gas synthesis approaches for nanomaterials, providing a number of most widely used protocols for each nanomaterial. An exhaustive list of nanomaterials are included, which are arranged according to the atomic number of the main element in the compound for easy search. For each material, the protocols are categorized according to the morphology of the nanostructure. A detailed reference is included in each protocol to point the readers to the source of the protocol. The third book describes many unconventional methods for the fabrication of nanostructures, including lithography and printing, self-assembly, chemical transformation, templated synthesis, electrospinning, laser induced synthesis, flame and plasma synthesis, and atomic layer deposition processes. The fourth book covers the typical methods for structural characterization of nanomaterials, including electron diffraction, electron microscopy, atomic force microscopy, scanning tunneling microscopy, X-ray diffraction, in-situ and operando X-ray techniques, X-ray absorption fine structure spectroscopy, static and dynamic light scattering, vibrational characterization methods, and NMR spectroscopy. In addition to the introduction of the basic operational principles of these tools, the book focuses explicitly on how they can be applied for analyzing nanomaterials. The handbook is a complete reference that can provide readers easily accessible information on how to synthesize and characterize nanomaterials desired for their target applications.

Download or read book Handbook of Nanoscience Engineering and Technology Second Edition written by William A. Goddard III and published by CRC Press. This book was released on 2007-05-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to study and manipulate matter at the nanoscale is the defining feature of 21st-century science. The first edition of the standard-setting Handbook of Nanoscience, Engineering, and Technology saw the field through its infancy. Reassembling the preeminent team of leading scientists and researchers from all areas of nanoscience and nanotechnology along with several new pioneers, this second edition will guide the field through its burgeoning adolescence. The phenomenal growth and staggering variety of applications of nanotechnology prevent any reference from providing a complete picture of the field. Instead, this edition surveys the most important areas, the most promising technologies, and the fastest-growing developments of current interest. In particular, it discusses fundamental theory of molecular and nanoelectronics, advanced fabrication technologies, modeling and simulation results, and novel molecular and nanoelectronic devices. New chapters in the Second Edition explore... The story of how the National Nanotechnology Initiative was born, where it is now, and where it is going Molecular computing and processing platforms Spin field effect transistors Moletronics and spintronics Nanoarchitectonics Molecular machines Magnetic manipulation applications in biomedical science Biological- and chemical-mediated self-assembly Nanomanufacturing Nanotextile technologies Nanofluidics for cell biology Carbon nanostructures and nanocomposites Accelerated design tools for nanophotonic devices Nanoparticles for drug delivery Remaining the definitive reference for nano researchers around the world, the Handbook of Nanoscience, Engineering, and Technology, Second Edition provides the signposts for blazers of the nano trail.

Download or read book Nanomaterials written by Sivashankar Krishnamoorthy and published by CRC Press. This book was released on 2017-12-19 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials are being incorporated into products all around us, having an incredible impact on durability, strength, functionality, and other material properties. There are a vast number of nanomaterials presently available, and new formulations and chemistries are being announced daily. Nanomaterials: A Guide to Fabrication and Applications provides product developers, researchers, and materials scientists with a handy resource for understanding the range of options and materials currently available. Covering a variety of nanomaterials and their applications, this practical reference: Discusses the scale of nanomaterials and nanomachines, focusing on integrated circuits (ICs) and microelectromechanical systems (MEMS) Offers insight into different nanomaterials’ interactions with chemical reactions, biological processes, and the environment Examines the mechanical properties of nanomaterials and potential treatments to enhance the nanomaterials’ performance Details recent accomplishments in the use of nanomaterials to create new forms of electronic devices Explores the optical properties of certain nanomaterials and the nanomaterials’ use in optimizing lasers and optical absorbers Describes an energy storage application as well as how nanomaterials from waste products may be used to improve capacitors Featuring contributions from experts around the globe, Nanomaterials: A Guide to Fabrication and Applications serves as a springboard for the discovery of new applications of nanomaterials.

Download or read book Handbook of Nanophase and Nanostructured Materials Synthesis written by Zhong Lin Wang and published by 清华大学出版社有限公司. This book was released on 2003 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: 本书内容强调纳米材料的合成,详细介绍了常用的化学和物理纳米合成方法的原理和基本程序,并介绍了各种方法的最新进展和参考文献

Download or read book Micromanufacturing and Nanotechnology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.