Download or read book Nanofillers for Binary Polymer Blends written by Sabu Thomas and published by Elsevier. This book was released on 2024-06-28 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofillers for Binary Polymer Blends covers major advances in the field of polymer-blend nanocomposites. The book encompasses the fundamentals of polymer blends, various nanofillers, experimental techniques used in their fabrication, the characterization of various polymer blend nanocomposites, and theoretical evaluations of various properties. The properties and potential applications that have been achieved in various polymer blends by the addition of nanofillers are also highlighted. Applications for commercial products, including automotive parts, packaging, construction materials, biotechnology, medical devices, building materials, computer housings, car interiors, etc., are also covered in detail.This is an important reference source for materials scientists and engineers looking to increase their understanding of how nanofillers are being used in polymer blends. Outlines the various types of nanofillers, explaining how the properties of each enhances the morphology, rheology, mechanical, dynamic mechanical, viscoelastic, electrical and thermal properties of polymer blends Provides information on the theory, modeling and simulation of nano-filled polymer blends Assesses the mechanism of selective localization of nanofillers in polymer blends, the effect of localization of nanofillers on the microstructure, and the relative performance of polymer blends

Download or read book Nanostructured Polymer Blends written by Roberto Scaffaro and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofillers can play two important roles in polymer blends. The first is the improvement of various properties such as mechanical, barrier, thermal, flame retardancy, and electrical properties. The second is the modification of miscibility/compatibility and morphology of polymer blends. The mechanism of action of nanoparticles to modify the morphology, interfacial properties, and performance of immiscible polymer blends relies on their localization, their interactions with polymer components, and the way these additives disperse within the polymer blend. The objective of this chapter is to review the research on nanofilled thermoplastic/thermoplastic polymer blends, paying particular attention both to the distribution of nanoparticles inside a binary polymer blend and to the effect of nanofillers on the morphology and on the properties of the thermoplastic polymer blends. In a large majority of cases, thermoplastic polymer blends filled with nanoparticles show better compatibility in terms of morphology size than pure blends. Moreover, the formation of a cocontinuous structure is promoted by the presence of the nanofiller.

Download or read book Nanostructured Polymer Blends written by Juan Rodríguez-Hernández and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of polymer blends constitutes an interesting alternative to obtaining micro- and nanostructured surfaces. The cost is reasonable and it is free from time-consuming procedures. Blending of polymers can yield materials with unprecedented properties that cannot be provided otherwise by using a single polymer. The free surface topography of polymer blend films, often related to phase domain structure, is critical to the applications. Two main aspects need to be considered in the preparation of multistructured blends: the interfaces involved and the morphology to be obtained. The control of these two aspects depends further on materials-related parameters involving the composition of the blend, the interfacial tension or viscosity ratio, and the processing conditions related to the temperature, time, or intensity of mixing, among others. Both domain structure and topography of the blend films have garnered increasing interest over the past decade. This chapter describes the nanomicrostructures formed at the polymer surface from polymer blends. Despite the crucial role that surfaces play in the final application of the material, up to now most of the studies concerning polymer blends have been related to the control of the mechanical properties (toughness, stiffness, thermal expansion, etc.), their barrier properties, or the electrical conductivity. This chapter focuses on the analysis of the structured polymer surfaces and thin films, giving an overview of the role of these structures on the final application. The principles of phase separation and the resulting structures formed are briefly discussed, followed by a wide overview of the possibilities of producing stimuli-responsive interfaces by introducing, among other things, pH- or temperature-responsive polymers within the blend. Finally, we look at how using particular preparation conditions and/or self-assembly of block copolymers, the formation of films and surfaces with hierarchical order length-scales can be induced. We also examine the main areas in which multiscale-ordered interfaces obtained from polymer blends have been applied.

Download or read book Compatibilization of Polymer Blends written by Ajitha A. R and published by Elsevier. This book was released on 2019-10-10 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compatibilization of Polymer Blends: Micro and Nano Scale Phase Morphologies, Interphase Characterization and Properties offers a comprehensive approach to the use of compatibilizers in polymer blends, examining both fundamental and advanced knowledge in the field. The book begins by introducing polymer blends, describing thermodynamics, miscibility, and phase separation, and explaining the main concepts of compatibilization. Other sections cover theoretical approaches for nearly compatible blends, incompatible blends, nanofillers, physical compatibilization, reactive compatibilization, morphological and structural characterization, and physico-mechanical characterization. Finally, key application areas are covered, including biomedical applications, packaging and automobile engineering. While this book will be a highly valuable reference source for academics, researchers and postgraduate students interested in polymer blends, it will also be ideal for anyone involved in the fields of polymer science, polymer chemistry, polymer physics, materials science, scientists, R&D professionals, and engineers in involved in the development or engineering of polymer products. Offers detailed and systematic coverage of essential and advanced topics relating to the compatibilization of polymer blends Presents a critical analysis of the effect of compatibilization on morphology and thermal, mechanical, electrical and viscoelastic properties of polymer blends Draws on novel studies and state-of-the-art research, discussing the latest issues and developments

Download or read book Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems written by Sabu Thomas and published by William Andrew. This book was released on 2015-09-22 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. Covers all important information for designing and selecting the right nanostructured polymer system Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties

Download or read book Nanostructured Polymer Blends written by Robert A. Shanks and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many nanostructured materials have been and are being prepared with increasing control over molecular configurations, conformations, and supramolecular assembly. These nanomaterials place an increasing challenge for characterization techniques to confirm the proposed structure and morphology. Several techniques are widely available, with increasing degrees of sophistication. Ideal techniques are those where the natural scale of the technique, such as radiation wavelength, matches that of the size scale of features in the material. In the case of nanostructured polymer blends the features are dispersed polymer phases, filler particles, and interphases. Immediately electron microscopies and X-ray techniques are apparent. Adaptions of these and related techniques extend their capabilities for the nano range. In addition to experimental observations, methods for quantifying the images or data are needed for comparison between materials and modeling via theoretical equations, which in the limit may become molecular modeling. As needs arise instruments have been improved in detection, resolution, accuracy, and precision. Development of any nanomaterial requires support from a suite of increasingly capable instrumentation. This review concentrates on techniques that directly probe nanostructures with mention of related techniques that apply to any dimension scale, though provide important secondary data.

Download or read book Polymer Blends written by Marian Kryszewski and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanostructured Polymer Blends written by Sabu Thomas and published by William Andrew. This book was released on 2013-11-28 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 30% of commercial polymers are blends or alloys or one kind or another. Nanostructured blends offer the scientist or plastics engineer a new range of possibilities with characteristics including thermodynamic stablility; the potential to improve material transparency, creep and solvent resistance; the potential to simultaneously increase tensile strength and ductility; superior rheological properties; and relatively low cost. Nanostructured Polymer Blends opens up immense structural possibilities via chemical and mechanical modifications that generate novel properties and functions and high-performance characteristics at a low cost. The emerging applications of these new materials cover a wide range of industry sectors, encompassing the coatings and adhesives industry, electronics, energy (photovoltaics), aerospace and medical devices (where polymer blends provide innovations in biocompatible materials). This book explains the science of nanostructure formation and the nature of interphase formations, demystifies the design of nanostructured blends to achieve specific properties, and introduces the applications for this important new class of nanomaterial. All the key topics related to recent advances in blends are covered: IPNs, phase morphologies, composites and nanocomposites, nanostructure formation, the chemistry and structure of additives, etc. Introduces the science and technology of nanostructured polymer blends – and the procedures involved in melt blending and chemical blending to produce new materials with specific performance characteristics Unlocks the potential of nanostructured polymer blends for applications across sectors, including electronics, energy/photovoltaics, aerospace/automotive, and medical devices (biocompatible polymers) Explains the performance benefits in areas including rheological properties, thermodynamic stablility, material transparency, solvent resistance, etc.

Download or read book Nanostructured Immiscible Polymer Blends written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2019-09-17 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Immiscible Polymer Blends: Migration and Interface covers a wide range of nanoparticle types, emphasizing the mechanisms and parameters involved in the migration of nanofillers inside immiscible polymer blends. This book explores the influence of nanoparticle migration on the localization, and hence, morphology development, electrical conductivity, and met-rheological properties of blended composite materials. As the influence of solid particles, ranging in size from several hundred nanometers to a few microns in immiscible polymer blends has been extensively studied for use as compatibilizers, morphology stabilizers, and reinforcement agents, this book is a timely resource. Outlines techniques used to prepare nanoparticles-modified immiscible polymer blend composites Explains the structural and morphological development, and melt-state rheological behaviors of nanoparticles-modified immiscible polymer blend composites Discusses major industrial applications

Download or read book Handbook of Smart Materials Technologies and Devices written by Chaudhery Mustansar Hussain and published by Springer Nature. This book was released on 2022-11-09 with total page 2831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together technical expertise, conceptual background, applications, and societal aspects of Industry 4.0: the evolution of automation and data exchange in fabrication technologies, materials processing, and device manufacturing at both experimental and theoretical model scales. The book assembles all the aspects of Industry 4.0, starting from the emergence of the concept to the consequences of its progression. Drawing on expert contributors from around the world, the volume details the technologies that sparked the fourth revolution and illustrates their characteristics, potential, and methods of use in the industrial and societal domains. In addition, important topics such as ethics, privacy and security are considered in a reality where all data is shared and saved remotely. The collection of contribution serve a very broad audience working in the fields of science and engineering, chemical engineering, materials science, nanotechnology, energy, environment, green chemistry, sustainability, electrical and electronic engineering, solid-state physics, surface science, aerosol technology, chemistry, colloid science, device engineering, and computer technology. This handbook ideal reference libraries in universities and industrial institutions, government and independent institutes, individual research groups and scientists.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Encyclopedia of Polymer Blends Volume 3 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this Encyclopedia imparts knowledge of fundamental principles and their applications for academicians, scientists and researchers, while informing engineers, industrialists and entrepreneurs of the current state of the technology and its utilization. The most comprehensive source on polymer blends available on the market Offers a complete and timely overview of the topic Each article presents up to date research & development on a topic and its basic principles and applications, integrates case studies, laboratory and pilot plant experiments, and gives due reference to published and patented literature Equips academics, scientists and researchers with knowledge of fundamentals principles and their applications, and informs the engineers, industrialists and entrepreneurs about the state of the art technology and its applications

Download or read book Recent Developments in Polymer Macro Micro and Nano Blends written by P. M. Visakh and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Developments in Polymer Macro, Micro and Nano Blends: Preparation and Characterisation discusses the various types of techniques that are currently used for the characterization of polymer-based macro, micro, and nano blends. It summarizes recent technical research accomplishments, emphasizing a broad range of characterization methods. In addition, the book discusses preparation methods and applications for various types of polymer-based macro, micro, and nano blends. Chapters include thermoplastic-based polymer & nano blends, applications of rubber based and thermoplastic blends, micro/nanostructures polymer blends containing block copolymers, advances in polymer-inorganic hybrids as membrane materials, synthesis of polymer/inorganic hybrids through heterophase polymerizations, nanoporous polymer foams from nanostructured polymer blends, and natural polymeric biodegradable nano blends for protein delivery. Describes the techniques pertaining to a kind (or small number) of blends, showing specific examples of their applications Covers micro, macro, and nano polymer blends Contains contributions from leading experts in the field

Download or read book Encyclopedia of Polymer Blends Volume 1 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this volume of the encyclopedia imparts knowledge of fundamental principles of polymer blends. Each article is uniformly structured for easy navigation, containing the latest research & development and its basic principles and applications.

Download or read book Multiphase Polymer Based Materials written by Charef Harrats and published by CRC Press. This book was released on 2009-03-24 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 10 years a large variety of new multiphase polymer-based materials have been studied from a morphological point of view. Simultaneously, huge progress has been achieved in microscopy. These circumstances underline the need for a reference that delineates the differences of various types of nanostructures in multiphase polymer-based

Download or read book Unsaturated Polyester Resins written by Sabu Thomas and published by Elsevier. This book was released on 2019-07-11 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication, and Applications explains the preparation, techniques and applications relating to the use of unsaturated polyester resin systems for blends, interpenetrating polymer networks (IPNs), gels, composites and nanocomposites, enabling readers to understand and utilize the improved material properties that UPRs facilitate. Chapters cover unsaturated polyester resins and their interaction at the macro, micro and nano levels, in-depth studies on the properties and analysis of UPR based materials, and the applications of UPR based composites, blends, IPNs and gels across a range of advanced commercial and industrial fields. This is a highly detailed source of information on unsaturated polyester resins, supporting academics, researchers and postgraduate students working with UPRs, polyesters, polymeric or composite materials, polymer chemistry, polymer physics, and materials science, as well as scientists, R&D professionals and engineers in industry. Covers the use of unsaturated polyester resin systems for blends, IPNs, gels, composites and nanocomposites Presents cutting-edge techniques for the analysis and improvement of properties of advanced UPR-based materials Unlocks the potential of unsaturated polyester resins in high-performance materials for a range of advanced applications

Download or read book Crystallization in Multiphase Polymer Systems written by Sabu Thomas and published by Elsevier. This book was released on 2017-09-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization in Multiphase Polymer Systems is the first book that explains in depth the crystallization behavior of multiphase polymer systems. Polymeric structures are more complex in nature than other material structures due to their significant structural disorder. Most of the polymers used today are semicrystalline, and the subject of crystallization is still one of the major issues relating to the performance of semicrystalline polymers in the modern polymer industry. The study of the crystallization processes, crystalline morphologies and other phase transitions is of great significance for the understanding the structure-property relationships of these systems. Crystallization in block copolymers, miscible blends, immiscible blends, and polymer composites and nanocomposites is thoroughly discussed and represents the core coverage of this book. The book critically analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale. Various experimental techniques used for the characterization of polymer crystallization process are discussed. Written by experts in the field of polymer crystallization, this book is a unique source and enables professionals and students to understand crystallization behavior in multiphase polymer systems such as block copolymers, polymer blends, composites and nanocomposites. Covers crystallization of multiphase polymer systems, including copolymers, blends and nanocomposites Features comprehensive, detailed information about the basic research, practical applications and new developments for these polymeric materials Analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale