Download or read book Nanofabrication written by José María de Teresa and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive edited volume on important and up-to-date nanolithography techniques and applications. The book includes an introduction on the importance of nanolithography in today's research and technology, providing examples of its applications. The remainder of the book is split into two sections. The first section contains the most important and established nanolithography techniques. As well as a detailed description of each technique, the reader can obtain useful information about the main advantages and drawbacks of each technique in terms of resolution, throughput, number of steps needed, cost, etc. At the end of this section, the reader will be able to decide which technique to use for different applications. The second section explores more specific applications of the nanolithography techniques previously described; as well as new techniques and applications. In some cases, the processes described in these chapters involve a combination of several nanolithography techniques. This section is less general but provides the reader with real examples.
Download or read book Nanofabrication written by Maria Stepanova and published by Springer Science & Business Media. This book was released on 2011-11-08 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to update scientists and engineers on the current state of the art in a variety of key techniques used extensively in the fabrication of structures at the nanoscale. The present work covers the essential technologies for creating sub 25 nm features lithographically, depositing layers with nanometer control, and etching patterns and structures at the nanoscale. A distinguishing feature of this book is a focus not on extension of microelectronics fabrication, but rather on techniques applicable for building NEMS, biosensors, nanomaterials, photonic crystals, and other novel devices and structures that will revolutionize society in the coming years.
Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.
Download or read book Nanofabrication Handbook written by Stefano Cabrini and published by CRC Press. This book was released on 2012-02-24 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books are dedicated to individual aspects of nanofabrication, there is no single source that defines and explains the total vision of the field. Filling this gap, Nanofabrication Handbook presents a unique collection of new and the most important established approaches to nanofabrication. Contributors from leading research facilities and academic institutions around the world define subfields, offer practical instructions and examples, and pave the way for future research. Helping readers to select the proper fabricating technique for their experiments, the book provides a broad vision of the most critical problems and explains how to solve them. It includes basic definitions and introduces the main underlying concepts of nanofabrication. The book also discusses the major advantages and disadvantages of each approach and offers a wide variety of examples of cutting-edge applications. Each chapter focuses on a particular method or aspect of study. For every method, the contributors describe the underlying theoretical basis, resolution, patterns and substrates used, and applications. They show how applications at the nanoscale require a different process and understanding than those at the microscale. For each experiment, they elucidate key solutions to problems relating to materials, methods, and surface considerations. A complete resource for this rapidly emerging interdisciplinary field, this handbook provides practical information for planning the experiments of any project that employs nanofabrication techniques. It gives readers a foundation to enter the complex world of nanofabrication and inspires the scientific community at large to push the limits of nanometer resolution.
Download or read book Nanofabrication written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication Techniques written by and published by BoD – Books on Demand. This book was released on 2023-12-20 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication is the process of assembling structures at the nanoscale with unique properties. This book describes proficient, low-cost, and robust nanofabrication techniques to produce nanostructures. It presents information on nanofabrication technology principles, methodologies, equipment, and processes, as well as discusses the fabrication of new structures for new applications. The nanofabrication techniques reviewed are applicable to different engineering processes, nano-electromechanical systems, biosensors, nanomaterials, photonic crystals, devices, and new structures. This book is a useful resource for students and professionals, including engineers, scientists, researchers, technicians, and technology managers.
Download or read book Recent Advances in Nanofabrication Techniques and Applications written by Bo Cui and published by BoD – Books on Demand. This book was released on 2011-12-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has experienced a rapid growth in the past decade, largely owing to the rapid advances in nanofabrication techniques employed to fabricate nano-devices. Nanofabrication can be divided into two categories: "bottom up" approach using chemical synthesis or self assembly, and "top down" approach using nanolithography, thin film deposition and etching techniques. Both topics are covered, though with a focus on the second category. This book contains twenty nine chapters and aims to provide the fundamentals and recent advances of nanofabrication techniques, as well as its device applications. Most chapters focus on in-depth studies of a particular research field, and are thus targeted for researchers, though some chapters focus on the basics of lithographic techniques accessible for upper year undergraduate students. Divided into five parts, this book covers electron beam, focused ion beam, nanoimprint, deep and extreme UV, X-ray, scanning probe, interference, two-photon, and nanosphere lithography.
Download or read book Nanofabrication for Smart Nanosensor Applications written by Fernando Gomes and published by Elsevier. This book was released on 2020-06-18 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication for Smart Nanosensor Applications addresses the design, manufacture and applications of a variety of nanomaterials for sensing applications. In particular, the book explores how nanofabrication techniques are used to create more efficient nanosensors, examines their major applications in biomedicine and environmental science, discusses the fundamentals of how nanosensors work, explores different nanofabrication techniques, and comments on toxicity and safety issues relating to the creation of nanosensors using certain nanomaterial classes. This book is an important resource for materials scientists and engineers who want to make materials selection decisions for the creation of new nansensor devices. Summarizes current research and applications of a variety of nanofabrication techniques for the creation of efficient sensing devices Provides readers with an understanding of surfaces and interfaces, a key challenge for those working on hybrid nanomaterials, carbon nanotubes, graphene, polymers and liquid crystal electro-optical imaging Discusses the variability and sight recognition of biopolymers, such as DNA molecules, which offer a wide range of opportunities for the self-organization of nanostructures into much more complex patterns
Download or read book Scanning Microscopy for Nanotechnology written by Weilie Zhou and published by Springer Science & Business Media. This book was released on 2007-03-09 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents scanning electron microscopy (SEM) fundamentals and applications for nanotechnology. It includes integrated fabrication techniques using the SEM, such as e-beam and FIB, and it covers in-situ nanomanipulation of materials. The book is written by international experts from the top nano-research groups that specialize in nanomaterials characterization. The book will appeal to nanomaterials researchers, and to SEM development specialists.
Download or read book Nanofabrication written by Andrew Sarangan and published by CRC Press. This book was released on 2016-10-26 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to introduce typical cleanroom processes, techniques, and their fundamental principles. It is written for the practicing scientist or engineer, with a focus on being able to transition the information from the book to the laboratory. Basic theory such as electromagnetics and electrochemistry is described in as much depth as necessary to understand and explain the current practice and their limitations. Examples from various areas of interest will be covered, such as the fabrication of photonic devices including photo detectors, waveguides, and optical coatings, which are not commonly found in other fabrication texts.
Download or read book Handbook of Nanofabrication written by and published by Academic Press. This book was released on 2010-05-25 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. Includes chapters covering the most important Nanofabrication techniques, which aids comprehensive understanding of the latest manufacturing technologies encountered in the field of nano-level manufacturing which is essential for preparing for advanced study and application in nanofabrication techniques by enabling thorough understanding of the entire nanofabrication process as it applies to advanced electronic and related manufacturing technologies Each chapter covers a nanofabrication technique comprehensively, which allows the reader to learn to produce nanometer-level products as well as collect, process, and analyze data, improve process parameters, and how to assist engineers in research, development and manufacture of the same Includes contributions from recognized experts from around the globe, making the reader aware of variations in similar techniques applied in different geographical locations and is better positioned to establish all possible global applications
Download or read book Micro and Nano Fabrication Technology written by Jiwang Yan and published by Springer. This book was released on 2018-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the state-of-the-art micro/nanofabrication technologies for creating miniature structures with high precision. These multidisciplinary technologies include mechanical, electrical, optical, physical, and chemical methods, as well as hybrid processes, covering subtractive and additive material manufacturing, as well as net-shape manufacturing. The materials the volume deals with include metals, alloys, semiconductors, polymers, crystals, glass, ceramics, composites, and nanomaterials. The volume is composed of 30 chapters, which are grouped into five parts. Engaging with the latest research in the field, these chapters provide important perspectives on key topics, from process developments at the shop level to scientific investigations at the academic level, offering both experimental work and theoretical analysis. Moreover, the content of this volume is highly interdisciplinary in nature, with insights from not only manufacturing technology but also mechanical/material science, optics, physics, chemistry, and more.
Download or read book Manufacturing Techniques for Microfabrication and Nanotechnology written by Marc J. Madou and published by CRC Press. This book was released on 2011-06-13 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for science and engineering students, this text focuses on emerging trends in processes for fabricating MEMS and NEMS devices. The book reviews different forms of lithography, subtractive material removal processes, and additive technologies. Both top-down and bottom-up fabrication processes are exhaustively covered and the merits of the different approaches are compared. Students can use this color volume as a guide to help establish the appropriate fabrication technique for any type of micro- or nano-machine.
Download or read book Nanocharacterization Techniques written by Osvaldo de Oliveira, Jr and published by William Andrew. This book was released on 2017-03-18 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocharacterization Techniques covers the main characterization techniques used in nanomaterials and nanostructures. The chapters focus on the fundamental aspects of characterization techniques and their distinctive approaches. Significant advances that have taken place over recent years in refining techniques are covered, and the mathematical foundations needed to use the techniques are also explained in detail. This book is an important reference for materials scientists and engineers looking for a through analysis of nanocharacterization techniques in order to establish which is best for their needs. Includes a detailed analysis of different nanocharacterization techniques, allowing readers to explore which one is best for their particular needs Provides examples of how each characterization technique has been used, giving readers a greater understanding of how each technique can be profitably used Covers the mathematical background needed to utilize each of these techniques to their best effect, meaning that readers can gain a full understanding of the theoretical principles behind each technique covered Serves as an important, go-to reference for materials scientists and engineers
Download or read book Nanotechnology Enabled Sensors written by Kourosh Kalantar-zadeh and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.
Download or read book Nanoscale Fabrication Optimization Scale up and Biological Aspects of Pharmaceutical Nanotechnology written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2017-12-11 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Fabrication, Optimization, Scale-up and Biological Aspects of Pharmaceutical Nanotechnology focuses on the fabrication, optimization, scale-up and biological aspects of pharmaceutical nanotechnology. In particular, the following aspects of nanoparticle preparation methods are discussed: the need for less toxic reagents, simplification of the procedure to allow economic scale-up, and optimization to improve yield and entrapment efficiency. Written by a diverse range of international researchers, the chapters examine characterization and manufacturing of nanomaterials for pharmaceutical applications. Regulatory and policy aspects are also discussed. This book is a valuable reference resource for researchers in both academia and the pharmaceutical industry who want to learn more about how nanomaterials can best be utilized. Shows how nanomanufacturing techniques can help to create more effective, cheaper pharmaceutical products Explores how nanofabrication techniques developed in the lab have been translated to commercial applications in recent years Explains safety and regulatory aspects of the use of nanomanufacturing processes in the pharmaceutical industry
Download or read book Nanofabrication written by and published by Springer. This book was released on 2011-11-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
