Download or read book Nanofabrication by Ion Beam Sputtering written by Tapobrata Som and published by CRC Press. This book was released on 2012-11-27 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable attention has been paid to ion beam sputtering as an effective way to fabricate self-organized nano-patterns on various substrates. The significance of this method for patterning surfaces is that the technique is fast, simple, and less expensive. The possibility to create patterns on very large areas at once makes it even more attracti
Download or read book Nanofabrication by Ion Beam Sputtering written by Tapobrata Som and published by CRC Press. This book was released on 2012-11-27 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable attention has been paid to ion beam sputtering as an effective way to fabricate self-organized nano-patterns on various substrates. The significance of this method for patterning surfaces is that the technique is fast, simple, and less expensive. The possibility to create patterns on very large areas at once makes it even more attractive. This book reviews various fascinating results, understand the underlying physics of ion induced pattern formation, to highlight the potential applications of the patterned surfaces, and to explore the patterning behavior by different irradiation parameters in order to create desired surface morphologies on specific materials.
Download or read book Nanofabrication Using Focused Ion and Electron Beams written by Ivo Utke and published by Oxford University Press. This book was released on 2012-03-05 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication Using Focused Ion and Electron Beams presents fundamentals of the interaction of focused ion and electron beams (FIB/FEB) with surfaces, as well as numerous applications of these techniques for nanofabrication involving different materials and devices. The book begins by describing the historical evolution of FIB and FEB systems, applied first for micro- and more recently for nanofabrication and prototyping, practical solutions available in the market for different applications, and current trends in development of tools and their integration in a fast growing field of nanofabrication and nanocharacterization. Limitations of the FIB/FEB techniques, especially important when nanoscale resolution is considered, as well as possible ways to overcome the experimental difficulties in creating new nanodevices and improving resolution of processing, are outlined. Chapters include tutorials describing fundamental aspects of the interaction of beams (FIB/FEB) with surfaces, nanostructures and adsorbed molecules; electron and ion beam chemistries; basic theory, design and configuration of equipment; simulations of processes; basic solutions for nanoprototyping. Emerging technologies as processing by cluster beams are also discussed. In addition, the book considers numerous applications of these techniques (milling, etching, deposition) for nanolithography, nanofabrication and characterization, involving different nanostructured materials and devices. Its main focus is on practical details of using focused ion and electron beams with gas assistance (deposition and etching) and without gas assistance (milling/cutting) for fabrication of devices from the fields of nanoelectronics, nanophotonics, nanomagnetics, functionalized scanning probe tips, nanosensors and other types of NEMS (nanoelectromechanical systems). Special attention is given to strategies designed to overcome limitations of the techniques (e.g., due to damaging produced by energetic ions interacting with matter), particularly those involving multi-step processes and multi-layer materials. Through its thorough demonstration of fundamental concepts and its presentation of a wide range of technologies developed for specific applications, this volume is ideal for researches from many different disciplines, as well as engineers and professors in nanotechnology and nanoscience.
Download or read book Functional Nanostructures Fabricated by Focused Electron Ion Beam Induced Deposition written by Rosa Córdoba Castillo and published by Springer Science & Business Media. This book was released on 2013-10-08 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis constitutes a detailed study of functional nanostructures (ferromagnetic, superconducting, metallic and semiconducting) fabricated by focused electron/ion beam induced deposition techniques. The nanostructures were grown using different precursor materials such as Co2(CO)8, Fe2(CO)9, W(CO)6, (CH3)3Pt(CpCH3) and were characterized by a wide range of techniques. This work reports results obtained for the morphology, the microstructure, the composition, the electrical transport mechanism, magnetic and superconducting properties of nanostructures. The results offers exciting prospects in a wide range of applications in nanotechnology and condensed matter physics.
Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.
Download or read book Nanofabrication Handbook written by Stefano Cabrini and published by CRC Press. This book was released on 2012-02-24 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books are dedicated to individual aspects of nanofabrication, there is no single source that defines and explains the total vision of the field. Filling this gap, Nanofabrication Handbook presents a unique collection of new and the most important established approaches to nanofabrication. Contributors from leading research facilities and
Download or read book Nanofabrication Using Focused Ion and Electron Beams written by Ivo Utke and published by . This book was released on with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication Using Focused Ion and Electron Beams presents fundamentals of the interaction of focused ion and electron beams (FIB/FEB) with surfaces, as well as numerous applications of these techniques for nanofabrication involving different materials and devices. The book begins by describing the historical evolution of FIB and FEB systems, applied first for micro- and more recently for nanofabrication and prototyping, practical solutions available in the market for different applications, and current trends in development of tools and their integration in a fast growing field of nanofabrication and nanocharacterization. Limitations of the FIB/FEB techniques, especially important when nanoscale resolution is considered, as well as possible ways to overcome the experimental difficulties in creating new nanodevices and improving resolution of processing, are outlined. Chapters include tutorials describing fundamental aspects of the interaction of beams (FIB/FEB) with surfaces, nanostructures and adsorbed molecules; electron and ion beam chemistries; basic theory, design and configuration of equipment; simulations of processes; basic solutions for nanoprototyping. Emerging technologies as processing by cluster beams are also discussed. In addition, the book considers numerous applications of these techniques (milling, etching, deposition) for nanolithography, nanofabrication and characterization, involving different nanostructured materials and devices. Its main focus is on practical details of using focused ion and electron beams with gas assistance (deposition and etching) and without gas assistance (milling/cutting) for fabrication of devices from the fields of nanoelectronics, nanophotonics, nanomagnetics, functionalized scanning probe tips, nanosensors and other types of NEMS (nanoelectromechanical systems). Special attention is given to strategies designed to overcome limitations of the techniques (e.g., due to damaging produced by energetic ions interacting with matter), particularly those involving multi-step processes and multi-layer materials. Through its thorough demonstration of fundamental concepts and its presentation of a wide range of technologies developed for specific applications, this volume is ideal for researches from many different disciplines, as well as engineers and professors in nanotechnology and nanoscience.
Download or read book Nanofabrication written by Zheng Cui and published by Springer. This book was released on 2016-08-10 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Nanofabrication is one of the most comprehensive introductions on nanofabrication technologies and processes. A practical guide and reference, this book introduces readers to all of the developed technologies that are capable of making structures below 100nm. The principle of each technology is introduced and illustrated with minimum mathematics involved. Also analyzed are the capabilities of each technology in making sub-100nm structures, and the limits of preventing a technology from going further down the dimensional scale. This book provides readers with a toolkit that will help with any of their nanofabrication challenges.
Download or read book Recent Advances in Nanofabrication Techniques and Applications written by Bo Cui and published by BoD – Books on Demand. This book was released on 2011-12-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has experienced a rapid growth in the past decade, largely owing to the rapid advances in nanofabrication techniques employed to fabricate nano-devices. Nanofabrication can be divided into two categories: "bottom up" approach using chemical synthesis or self assembly, and "top down" approach using nanolithography, thin film deposition and etching techniques. Both topics are covered, though with a focus on the second category. This book contains twenty nine chapters and aims to provide the fundamentals and recent advances of nanofabrication techniques, as well as its device applications. Most chapters focus on in-depth studies of a particular research field, and are thus targeted for researchers, though some chapters focus on the basics of lithographic techniques accessible for upper year undergraduate students. Divided into five parts, this book covers electron beam, focused ion beam, nanoimprint, deep and extreme UV, X-ray, scanning probe, interference, two-photon, and nanosphere lithography.
Download or read book Nanofabrication Using Focused Ion and Electron Beams written by Ivo Utke and published by OUP USA. This book was released on 2012-05 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews the achievements and potentials of a minimally invasive, three-dimensional, and maskless surface structuring technique operating at nanometer scale by using the interaction of focused ion and electron beams (FIB/FEB) with surfaces and injected molecules.
Download or read book Nanofabrication written by Zheng Cui (author) and published by Springer Nature. This book was released on with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ion Beam Based Nanofabrication Volume 1020 written by Daryush Ila and published by . This book was released on 2007-09-05 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Functional Nanostructures Fabricated by Focused Electron Ion Beam Induced Deposition written by Rosa Cordoba Castillo and published by . This book was released on 2013-10-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students. Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices. Sample Chapter(s). Chapter 1: Atom, Molecule, and Nanocluster Manipulations for Nanostructure Fabrication Using Scanning Probe Microscopy (3,320 KB). Contents: Atomic Force Microscope Lithography (N Kawasegi et al.); Nanowire Assembly and Integration (Z Gu & D H Gracias); Extreme Ultraviolet Lithography (H Kinoshita); Electron Projection Lithography (T Miura et al.); Electron Beam Direct Writing (K Yamazaki); Electron Beam Induced Deposition (K Mitsuishi); Focused Ion Beams and Interaction with Solids (T Ishitani et al.); Nanofabrication of Nanoelectromechanical Systems (NEMS): Emerging Techniques (K L Ekinci & J Brugger); and other papers. Readership: Researchers, professionals, and graduate students in the fields of nanoengineering and nanoscience.
Download or read book Nanofabrication Handbook written by Stefano Cabrini and published by CRC Press. This book was released on 2012-02-24 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books are dedicated to individual aspects of nanofabrication, there is no single source that defines and explains the total vision of the field. Filling this gap, Nanofabrication Handbook presents a unique collection of new and the most important established approaches to nanofabrication. Contributors from leading research facilities and academic institutions around the world define subfields, offer practical instructions and examples, and pave the way for future research. Helping readers to select the proper fabricating technique for their experiments, the book provides a broad vision of the most critical problems and explains how to solve them. It includes basic definitions and introduces the main underlying concepts of nanofabrication. The book also discusses the major advantages and disadvantages of each approach and offers a wide variety of examples of cutting-edge applications. Each chapter focuses on a particular method or aspect of study. For every method, the contributors describe the underlying theoretical basis, resolution, patterns and substrates used, and applications. They show how applications at the nanoscale require a different process and understanding than those at the microscale. For each experiment, they elucidate key solutions to problems relating to materials, methods, and surface considerations. A complete resource for this rapidly emerging interdisciplinary field, this handbook provides practical information for planning the experiments of any project that employs nanofabrication techniques. It gives readers a foundation to enter the complex world of nanofabrication and inspires the scientific community at large to push the limits of nanometer resolution.
Download or read book Nanofabrication written by Christo Papadopoulos and published by Springer. This book was released on 2016-07-30 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the techniques and tools of nanostructure fabrication from state-of-the-art lithography to emerging self-assembly approaches. Top-down and bottom-up methodologies along with hybrid approaches are used to illustrate the fabrication of structures including integrated circuits, semiconductor quantum dots, metallic nanoparticles, carbon nanotubes, molecular structures, nanocomposites, arrays and superstructures. Nanofabrication applications in nanoelectronics, biotechnology, nanomechanical devices and nanophotonics will be examined. This brief will present the core concepts of nanofabrication relevant to researchers and industry in this important and rapidly evolving area.
Download or read book Nanofabrication Techniques written by and published by BoD – Books on Demand. This book was released on 2023-12-20 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication is the process of assembling structures at the nanoscale with unique properties. This book describes proficient, low-cost, and robust nanofabrication techniques to produce nanostructures. It presents information on nanofabrication technology principles, methodologies, equipment, and processes, as well as discusses the fabrication of new structures for new applications. The nanofabrication techniques reviewed are applicable to different engineering processes, nano-electromechanical systems, biosensors, nanomaterials, photonic crystals, devices, and new structures. This book is a useful resource for students and professionals, including engineers, scientists, researchers, technicians, and technology managers.
