Download or read book Nanocrystalline Titanium written by Halina Garbacz and published by Elsevier. This book was released on 2018-09-17 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocrystalline Titanium discusses the features of nanocrystalline titanium production by various SPD methods, also comparing their microstructure and properties. The authors characterize the physical, chemical and mechanical properties of ultrafine grained titanium, indicating which are crucial for their application. Titanium alloys are characterized by high specific strength combined with excellent corrosion resistance, whereas the mechanical properties of pure (or commercial purity - CP) titanium are much lower. SPD methods are proving to be an effective way to increase strength, even to a level typical for structural titanium alloys. This book is useful for academics and professionals studying the behavior of metallic materials. - Discusses various SPD techniques and their applications for titanium - Previews the limitations of SPD methods for titanium, along with the problems that can be encountered during production - Characterizes the physical, chemical and mechanical properties of ultrafine grained titanium and indicates which are crucial for its production applications

Download or read book Nanocrystalline Materials written by Aleksandr Ivanovich Gusev and published by Cambridge Int Science Publishing. This book was released on 2004 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the monograph, the first of this type in the world, the authors discuss systematically the current state of investigations into nanocrystalline materials. The experimental results on the effect of the nanocrystalline state on the microstructure and the mechanical, thermophysical, optical, and magnetic properties of metals, alloys and solid-phase compounds are generalised. Special attention is given to the main methods of production of isolated nanoparticles, ultrafine powders and dense nanocrystalline materials. The dimensional effects in isolated nanoparticles and high-density nanocrystalline materials are discussed in detail, and the important role of the interface in the formation of the structure and properties of dense nanocrystalline materials is shown. The modelling considerations, explaining special features of the structure and anomalous properties of substances in the nanocrystalline condition, are analysed.

Download or read book Grain Growth of Nanocrystalline Titanium Dioxide written by Stan Farrell and published by . This book was released on 1999 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanocrystalline Titanium Dioxide written by Giuseppe Cappelletti and published by . This book was released on 2005 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Luminescent Materials and Quantum Confinement written by M. Cahay and published by The Electrochemical Society. This book was released on 1999 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Mechanical Nanostructuring 2 Volume Set written by Mahmood Aliofkhazraei and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth information on how to obtain high-performance materials by controlling their nanostructures, this ready reference covers both the bottom-up and the top-down approaches to the synthesis and processing of nanostructured materials. The focus is on advanced methods of mechanical nanostructuring such as severe plastic deformation, including high pressure torsion, equal channel angular processing, cyclic extrusion compression, accumulative roll bonding, and surface mechanical attrition treatment. As such, the contents are inherently application-oriented, with the methods presented able to be easily integrated into existing production processes. In addition, the structure-property relationships and ways of influencing the nanostructure in order to exhibit a desired functionality are reviewed in detail. The whole is rounded off by a look at future directions, followed by an overview of applications in various fields of structural and mechanical engineering. With its solutions for successful processing of complex-shaped workpieces and large-scale specimens with desired properties, this is an indispensable tool for purposeful materials design.

Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.

Download or read book Heterogeneous Catalysis in Organic Transformations written by Varun Rawat and published by CRC Press. This book was released on 2022-04-26 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the broad challenges around energy and the environment have become the focus of much research, scientists and experts have dedicated their efforts to developing more active and selective catalytic systems for key chemical transformations. For many decades environmentally viable protocols for the synthesis of fine chemicals have been the crux of academic and industrial research. Heterogeneous Catalysis in Organic Transformations serves as an overview of this work, providing a complete description of role of heterogeneous catalysis in organic transformations and offering a review of the current and near future technologies and applications. Discusses the fundamentals of catalysis and compares the advantages and disadvantages of different types of catalyst systems Examines oxide nanoparticles and noble metal nanoparticles Consider organometallic compounds, solid-supported catalysts, and mesoporous materials Describes recent advances in metal-based heterogeneous catalysts and new reactions with possible mechanistic pathways Providing a comprehensive review of heterogeneous catalysis from the basics through recent advances, this book will be of keen interest to undergraduates, graduates, and researchers in chemistry, chemical engineering, and associated fields.

Download or read book Mechanical Alloying And Milling written by Cury Suryanarayana and published by CRC Press. This book was released on 2004-09-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys the broad field of mechanical alloying from a scientific and technological perspective to form a timely and comprehensive resource valuable to both students and researchers. The treatment progresses from the historical background through a description of the process, the different metastable effects produced, and the mechanisms of

Download or read book Titanium Dioxide TiO2 and Its Applications written by Francesco Parrino and published by Elsevier. This book was released on 2020-11-29 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific interest in TiO2-based materials has exponentially grown in the last few decades. Titanium Dioxide (TiO2) and Its Applications introduces the main physicochemical properties of TiO2 which are the basis of its applications in various fields. While the basic principles of the TiO2 properties have been the subject of various previous publications, this book is mainly devoted to TiO2 applications. The book includes contributions written by experts from a wide range of disciplines in order to address titanium dioxide's utilization in energy, consumer, materials, devices, and catalytic applications. The various applications identified include: photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, and heat transfer. Titanium Dioxide (TiO2) and Its Applications is suitable for a wide readership in the disciplines of materials science, chemistry, and engineering in both academia and industry. - Includes a wide range of current and emerging applications of titanium dioxide in the fields of energy, consumer applications, materials, and devices - Provides a brief overview of titanium dioxide and its properties, as well as techniques to design, deposit, and study the material - Discusses the relevant properties, preparation methods, and other apposite considerations in each application-focused chapter

Download or read book Titanium Alloys written by A.K.M. Nurul Amin and published by BoD – Books on Demand. This book was released on 2012-03-16 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first section of the book includes the following topics: fusion-based additive manufacturing (AM) processes of titanium alloys and their numerical modelling, mechanism of ?-case formation mechanism during investment casting of titanium, genesis of gas-containing defects in cast titanium products. Second section includes topics on behavior of the (? + ?) titanium alloys under extreme pressure and temperature conditions, hot and super plasticity of titanium (? + ?) alloys and some machinability aspects of titanium alloys in drilling. Finally, the third section includes topics on different surface treatment methods including nanotube-anodic layer formation on two phase titanium alloys in phosphoric acid for biomedical applications, chemico-thermal treatment of titanium alloys applying nitriding process for improving corrosion resistance of titanium alloys.

Download or read book On Solar Hydrogen and Nanotechnology written by Lionel Vayssieres and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: More energy from the sun strikes Earth in an hour than is consumed by humans in an entire year. Efficiently harnessing solar power for sustainable generation of hydrogen requires low-cost, purpose-built, functional materials combined with inexpensive large-scale manufacturing methods. These issues are comprehensively addressed in On Solar Hydrogen & Nanotechnology – an authoritative, interdisciplinary source of fundamental and applied knowledge in all areas related to solar hydrogen. Written by leading experts, the book emphasizes state-of-the-art materials and characterization techniques as well as the impact of nanotechnology on this cutting edge field. Addresses the current status and prospects of solar hydrogen, including major achievements, performance benchmarks, technological limitations, and crucial remaining challenges Covers the latest advances in fundamental understanding and development in photocatalytic reactions, semiconductor nanostructures and heterostructures, quantum confinement effects, device fabrication, modeling, simulation, and characterization techniques as they pertain to solar generation of hydrogen Assesses and establishes the present and future role of solar hydrogen in the hydrogen economy Contains numerous graphics to illustrate concepts, techniques, and research results On Solar Hydrogen & Nanotechnology is an essential reference for materials scientists, physical and inorganic chemists, electrochemists, physicists, and engineers carrying out research on solar energy, photocatalysis, or semiconducting nanomaterials, both in academia and industry. It is also an invaluable resource for graduate students and postdoctoral researchers as well as business professionals and consultants with an interest in renewable energy.

Download or read book Cellulose Nanocrystals written by Wadood Y. Hamad and published by John Wiley & Sons. This book was released on 2017-04-17 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into cellulose nanocrystals is currently in an exponential growth phase, with research into potential applications now strengthened by recent advances in nanomanufacturing. The possibility of routine commercial production of these advanced materials is now becoming a reality. Cellulose Nanocrystals: Properties, Production and Applications provides an in-depth overview of the materials science, chemistry and physics of cellulose nanocrystals, and the technical development of advanced materials based on cellulose nanocrystals for industrial and medical applications. Topics covered include: • A comprehensive treatment of the structure, morphology and synthesis of cellulose nanocrystals. • The science and engineering of producing cellulose nanocrystals and the challenges involved in nanomanufacturing on a large industrial scale. • Surface/interface modifications of cellulose nanocrystals for the development of novel biomaterials with attractive structural and functional properties. • The scientific bases for developing cellulose-based nanomaterials with advanced functionalities for industrial/medical applications and consumer products. • Discussions on the (i) reinforcing potential of cellulose nanocrystals in polymer nanocomposites, (ii) utilization of these nanocrystals as efficient templates for developing tunable photonic materials, as well as (iii) applications in sustainable electronics and biomedicine. Cellulose Nanocrystals: Properties, Production and Applications will appeal to audiences in the physical, chemical and biological sciences as well as engineering disciplines. It will be of critical interest to industrialists seeking to develop sustainable new materials for the advanced industrial economies of the 21st century, ranging from adaptive “smart” packaging materials, to new chiral, mesoporous materials for optoelectronics and photonics , to high-performance nanocomposites for structural applications.

Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys

Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.

Download or read book Titanium in Medical and Dental Applications written by Francis Froes and published by Woodhead Publishing. This book was released on 2018-05-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium in Medical and Dental Applications is an essential reference book for those involved in biomedical materials and advanced metals. Written by well-known experts in the field, it covers a broad array of titanium uses, including implants, instruments, devices, the manufacturing processes used to create them, their properties, corrosion resistance and various fabrication approaches. Biomedical titanium materials are a critically important part of biomaterials, especially in cases where non-metallic biomedical materials are not suited to applications, such as the case of load-bearing implants. The book also covers the use of titanium for implants in the medical and dental fields and reviews the use of titanium for medical instruments and devices. - Provides an understanding of the essential and broad applications of Titanium in both the medical and dental industries - Discusses the pathways to manufacturing titanium into critical biomedical and dental devices - Includes insights into further applications within the industry

Download or read book Nanomaterials Imaging Techniques Surface Studies and Applications written by Olena Fesenko and published by Springer Science & Business Media. This book was released on 2013-08-13 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research on a wide range of nanotechnology techniques and applications. It features contributions from scientists who participated in the International Summer School “Nanotechnology: From Fundamental Research to Innovations” in Bukovel, Ukraine on August 26 – September 2, 2012 funded by the European Commission FP7 project Nanotwinning implemented by the Institute of Physics of National Academy of Sciences of Ukraine and partner institutions: University of Tartu (Estonia), European Profiles A.E. (Greece), University of Turin (Italy) and Université Pierre et Marie Curie (France). Worldwide experts present the latest results on such key topics as microscopy of nanostructures; nanocomposites; nanostructured interfaces and surfaces; nanooptics; nanoplasmonics; and enhanced vibrational spectroscopy. Imaging technique coverage ranges from atomic force microscopy and spectroscopy, multiphoton imagery, and laser diagnostics of nanomaterials and nanostructures, to resonance Raman and SERS for surface characterization, and scanning tunneling microscopy of organic molecules. The breadth of topics highlights the exciting variety of research currently being undertaken in this field and suggests new opportunities for interdisciplinary collaboration and future research.