Download or read book Nanoaerosols Air Filtering and Respiratory Protection written by Katarzyna Majchrzycka and published by CRC Press. This book was released on 2020-08-02 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent toxicological studies show that nanoparticles released in technological processes and combustion processes outside industry can be dangerous for humans especially when entering the body through the mouth and nose. In connection with the above, the use of adequately effective respiratory protection equipment is of great importance in prophylactic and preventive activities. The first part of Nanoaerosols, Air Filtering and Respiratory Protection: Science and Practice refers to the general phenomena of filtration described on the basis of the authors’ own experience and international reports. The book also includes a description of the respiratory system and principles of its functioning and the accumulation of aerosol particles. It goes on to discuss technological innovations regarding the production of filtering materials for protection against nanoparticles and the latest test methods. Finally, the book contains information about the proper selection and use of respiratory protective devices against airborne nanoparticles in the workplace and everyday life. Special attention is paid to proper fit procedures as well as use and maintenance activities of such devices. The content of the book with rich illustrative material has been presented so that it can be used by health and safety experts, students as well as employers, employees and private users of respiratory protective devices. "Through a comprehensive approach to the subject of the work, the authors present theoretical foundations as well as practical solutions that are used in the research and development of personal respiratory protection. The complementarity of the information contained in the book will allow the reader to become familiar with a wide range of knowledge related to the design and manufacture as well as assessment of properties and procedures for the use of respiratory protection against the adverse effects of aerosols, including air contaminated with nanoparticles and microparticles. In my opinion the book is a valuable part of the series Occupational Safety, Health, and Ergonomics: Theory and Practice, published by Taylor & Francis." —Maciej Boguń, ŁUKASIEWICZ – The Textile Research Institute, Łódź

Download or read book Nanoaerosols Air Filtering and Respiratory Protection written by Katarzyna Majchrzycka and published by CRC Press. This book was released on 2020-08-02 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent toxicological studies show that nanoparticles released in technological processes and combustion processes outside industry can be dangerous for humans especially when entering the body through the mouth and nose. In connection with the above, the use of adequately effective respiratory protection equipment is of great importance in prophylactic and preventive activities. The first part of Nanoaerosols, Air Filtering and Respiratory Protection: Science and Practice refers to the general phenomena of filtration described on the basis of the authors’ own experience and international reports. The book also includes a description of the respiratory system and principles of its functioning and the accumulation of aerosol particles. It goes on to discuss technological innovations regarding the production of filtering materials for protection against nanoparticles and the latest test methods. Finally, the book contains information about the proper selection and use of respiratory protective devices against airborne nanoparticles in the workplace and everyday life. Special attention is paid to proper fit procedures as well as use and maintenance activities of such devices. The content of the book with rich illustrative material has been presented so that it can be used by health and safety experts, students as well as employers, employees and private users of respiratory protective devices. "Through a comprehensive approach to the subject of the work, the authors present theoretical foundations as well as practical solutions that are used in the research and development of personal respiratory protection. The complementarity of the information contained in the book will allow the reader to become familiar with a wide range of knowledge related to the design and manufacture as well as assessment of properties and procedures for the use of respiratory protection against the adverse effects of aerosols, including air contaminated with nanoparticles and microparticles. In my opinion the book is a valuable part of the series Occupational Safety, Health, and Ergonomics: Theory and Practice, published by Taylor & Francis." —Maciej Boguń, ŁUKASIEWICZ – The Textile Research Institute, Łódź

Download or read book Respiratory Protection Against Hazardous Biological Agents written by Katarzyna Majchrzycka and published by CRC Press. This book was released on 2020-07-26 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: ‘Protection against harmful bioaerosol is one of today’s major concerns. This applies both to people inside and outside the work environment. In this book, renowned scientists provide up-to-date and authoritative reviews of the latest scientific research and practice that has contributed to our understanding of the harmfulness of the bioaerosol and protection against it. A detailed discussion of bioaerosol protection methods and equipment as well as presenting future trends in prognostic modelling are the undeniable value of this monograph. This comprehensive book is indispensable for anyone involved in occupational and environmental hygiene, biological hazard, recognition and control in occupational and public environments’. — Bogumił Brycki, Adam Mickiewicz University The threats of biological airborne hazards are a global danger throughout the world today. Respiratory Protection Against Hazardous Biological Agents covers sources and practices of bioaerosol sampling, and discusses the prevention of these airborne hazards. The most common workplace hazard is poor air quality. The book provides the basic principles of a safe work environment in the conditions where workers might be exposed to harmful bioaerosols. It presents key characteristics of biological hazards and their effects on the human body. It examines microbial growth in filtering materials and provides the details of specific risks for users of respiratory protective devices. The book will present the reader a guide on how to measure the risk of exposure of biological agents and properly select respiratory protective devices. The book is ideal for the health and safety professionals and experts in the field of environmental health. FEATURES: Evaluates the risk of exposure to biological agents Describes the characteristics of biological factors and their effects on the human body Provides training on the importance of respiratory protective devices Examines microorganisms in the work environment Provides examples and case studies

Download or read book Nanofiber Filter Technologies for Filtration of Submicron Aerosols and Nanoaerosols written by Wallace Woon-Fong Leung and published by Elsevier. This book was released on 2021-10-30 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofiber Filter Technologies for Filtration of Submicron Aerosols and Nanoaerosols covers the nanoaerosols (less than 100 nanometers) to larger submicron aerosols due mostly to pollution, which are present in high number concentration in our surroundings. People are breathing these nanoaerosols daily without being aware of it. Airborne viruses from flu to coronaviruses are also nanoaerosols. During the COVID-19 pandemic, it took a long time for health authorities and the General Public to recognize the airborne transmission mode of the virus. This leads to inadequate protection and ineffective virus control strategies resulting in high infection and death rates. The book cites evidence and observations pointing to the airborne transmission mode of the coronavirus. It also discusses different filtration technologies using nanofibers to capture these aerosols for short-term filtration, where aerosols are trapped in the filter (depth filtration), and long-term filtration, where aerosols are trapped in the growing filter cake (cake filtration). This book provides a good understanding on how nanofibers, which is of size 1/1000 times that of a normal human hair, can effectively filter these tiny aerosols. NFT, organized in four sections – fundamentals, deep understanding, technologies, and application, covering comprehensively on the subject, is a valuable resource for undergraduates and graduates, engineers, researchers and practitioners in related industries. - Describes technologies with insight and use basic engineering principles to build-up technologies - Includes extensive clear and understandable figures and tables to enhance key concepts - Uses examples throughout to explain engineering principles and interdisciplinary concepts - The only book in the market focusing on nanofiber filter technologies for filtering submicron aerosols and nanoaerosols

Download or read book Head Eye and Face Personal Protective Equipment written by Katarzyna Majchrzycka and published by CRC Press. This book was released on 2020-08-04 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Head, Eye, and Face Personal Protective Equipment: New Trends, Practice, and Applications presents protective equipment in the context of the latest design trends, materials, and technologies. It informs the reader using basic safety principles to avoid issues with commonly used personal protective equipment (PPE), such as helmets and eye and face protectors. It provides the latest design trends in eye and face protectors to avoid optical hazards and for use in variable lighting conditions. Features: • Fills the gap on current solutions of PPE and occupational safety • Educates in reducing risk connected with using industrial safety gear • Helpful to optometrists in the selection of eye protection for people with visual impairments • Instructs the reader on choosing smart materials and safety products • Provides best practices for checking the technical condition of the equipment This book is essential for the safety professional and medical experts in the field. It provides an interdisciplinary approach to personal protective equipment using new technologies in the field. "The monograph Head, Eye, and Face Personal Protective Equipment - New Trends, Practice and Applications is a complementary and thoughtful but selected compilation of the most relevant information concerning protective helmets as well as eye and face protection. The compilation of these two protection types is the result of the common use of both protective helmets and eye and face protectors. This requires their full compatibility, both in terms of ensuring optimum safety and comfort of use. The authors have chosen the material according to the needs of people directly responsible for safety at work and users of those protectors. The main aim of the work is to popularise knowledge in the field of construction, research methods, selection and use of protective helmets and eye and face protectors. In terms of use, the authors emphasise the necessity of independent control, i.e. checking the technical condition of the equipment used by the end users. The presented monograph includes the current state of knowledge in this scope, extended by the results and summaries of the authors' own research. All requirements and research methods are given based on European (EN), international (ISO) standards and standards operating in different geographical areas. The monograph also encompasses new trends in the design of protective helmets and eye and face protectors. All this allows me to emphasize the uniqueness of this monograph in relation to previous publications in this field, both in terms of the scope and selection of information concerning protective helmets and eye and face protectors." — Ryszard Korycki, Łódź University of Technology

Download or read book New Opportunities and Challenges in Occupational Safety and Health Management written by Daniel Podgórski and published by CRC Press. This book was released on 2020-07-08 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global economy and its business environment, and thus the world of work, have recently been influenced by demographic and social changes, globalisation, as well as rapid development and introduction of novel, sophisticated and previously unknown technologies and new business models, especially in the context of the so-called fourth industrial revolution. These changes pose a number of challenges in terms of maintaining and improving occupational safety and health (OSH) management performance, as traditional approaches to OSH management in new working environments may no longer be effective. In view of the above, the overall goal of this book is to present new approaches and methods for improving the effectiveness of OSH management. They are based on state-of-the-art research and are in line with the latest trends and concepts in the field. The book focuses on five thematic areas, which are discussed in respective chapters: 1) Implementing the process approach to OSH management; 2) Improving OSH management systems with fuzzy cognitive maps; 3) Implementing strategic thinking approaches in relation to OSH management; 4) Integrating OSH management within the framework of the CSR concept; 5) Enhancing OSH management processes through the use of smart digital technologies. The methods and solutions discussed may be considered as specific "opportunities" for the improvement to be taken into account in the processes of implementing and maintaining an OSH management system in light of the requirements of the new ISO 45001 standard.

Download or read book Microbiological Corrosion of Buildings written by Rafał Górny and published by CRC Press. This book was released on 2020-08-09 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental stress caused by water continuously exposes buildings to microbial colonization. This is highly evident when both minor dampness and mass flooding occur. The text describes how microbiological corrosion of buildings and the structures and substances derived from these hazards are responsible for adverse health effects on people exposed to these contaminated environments. Microbiological Corrosion of Buildings: A Guide to Detection, Health Hazards, and Mitigation describes the key elements and methods for neutralising and removing microbiological contamination, and the operating algorithm for checking the effectiveness of preventative solutions. Ideal for construction engineers, microbiologists and professionals in the field. Features: Latest methods for detection of indoor microbial hazards Identifies the tools needed for natural, non-destructive and non-invasive methods of bio-corrosion removal Describes the social and health problems associated with exposure to microbiological hazards Provides case studies and examples of microorganisms responsible for microbial corrosion. ‘Climate change and the associated adverse effects, such as floods and whirlwinds, make the problem of microbiological corrosion of buildings that generates health risks and economic losses on a global scale, the focus of science and technology. The monograph presents a complex problem of building bio-corrosion, that requires knowledge of the distant fields of microbiology and building technology, for the use of both scientists and practitioners. This pioneering work of an interdisciplinary nature harmoniously combines knowledge on specific microbiological issues relating to the process of bio-corrosion and the associated health risks with detailed issues of construction technology concerning the prevention of bio-corrosion and its removal. The authors succeeded in combining a very high scientific level in the monograph with an accessible and understandable presentation of complex problems. The extensive references, ranging from "classical" items from many years ago to the most recent articles presenting the state of the art in this field, are worth emphasising.’ —Prof. Jacek Dutkiewicz, Ph.D., D.Sc., Institute of Rural Health in Lublin

Download or read book Visual and Non Visual Effects of Light written by Agnieszka Wolska and published by CRC Press. This book was released on 2020-07-29 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of artificial lighting extends the time of wakefulness after dark and enables work at night, thus disturbing the human circadian rhythm. The understanding of the physiological mechanisms of visual and non-visual systems may be important for the development and use of proper light infrastructure and light interventions for different workplace settings, especially for shift work conditions. Visual and Non-Visual Effects of Light: Working Environment and Well-Being presents the impact of lighting in the working environment on human health, well-being and visual performance. The physiological explanation of the visual and non-visual effects of light on humans which discusses the biological bases of image and non-image forming vision at the cellular level may be of particular interest to any professional in the field of medicine, physiology, and biology. It is one of the intentions of this book to put forward some recommendations and examples of lighting design which take into account both the visual and non-visual effects of light on humans. These may be of particular interest to any professional in the field of lighting, occupational safety and health, and interior design. "What effects on health can a light ‘overdose’ or light deficiency have? What is bad light? The authors of the monograph provide answers to these questions. Just as for a physicist, the dual nature of light comprises an electromagnetic wave and a photon, the duality of light for a physician comprises visual and non-visual effects." --------------------------------------------------------Prof Jacek Przybylski, Medical University of Warsaw "This is a unique publication in the field of lighting technology. The authors have skillfully combined both the technical and biomedical aspects involved, which is unprecedented in the literature available. As a result, an important study has been created for many professional groups, with a significant impact on the assessment of risks associated with LED sources." --------------------------------------------Prof Andrzej Zając, Military University of Technology, Warsaw

Download or read book Occupational Noise and Workplace Acoustics written by Dariusz Pleban and published by CRC Press. This book was released on 2020-09-02 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern noise research and assessment techniques are commonly used in the workplace and our personal living environment. Occupational Noise and Workplace Acoustics presents new, innovative, advanced research and evaluation methods of parameters characterizing acoustic field and noise in the working environment, as well as acoustic properties of rooms and noise reduction measures. This includes acoustic field visualization methods, field imaging techniques, wireless sensor networks, and the Internet of Things (IoT); optimization methods using genetic algorithms; acoustic quality assessment methods for rooms; and methods for measuring ultrasonic noise in the frequency range of 10-40 kHz. This book is a valuable resource for individuals and students interested in the areas of acoustic and sound engineering as it provides: The latest techniques and methods in the field of noise reduction and improvement of acoustic comfort, Innovative and advanced acoustic field visualization techniques for those with an auditory impairment, Explains noise reduction through proper workplace design, Discusses use of wireless sensor networks and the IoT for monitoring noise, and Provides acoustic quality assessment methods. "The authors’ intention to expound on advanced issues in a lucid and accessible way was rewarded with success. In the book, an expert will find a number of hints helpful in solving actual problems, whereas a layperson will be able to form a view on challenges facing contemporary technology. What should also be emphasized is the book’s soundness in documenting these advanced theses and postulates with diligently conducted empirical research. Despite a wide thematic range, the book is written consistently and under no circumstances can be considered a collection of randomly selected problems. The content corresponds fully to the title. The authors are consistent in acquainting the reader with topical scientific issues concerning assessment of acoustic hazards and the methodology of combating them." —Professor Zbigniew Dąbrowski, BEng, PhD, DSc, Warsaw University of Technology

Download or read book Virtual Reality and Virtual Environments written by Andrzej Grabowski and published by CRC Press. This book was released on 2020-07-29 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Virtual reality (VR) techniques are becoming increasingly popular. The use of computer modeling and visualization is no longer uncommon in the area of ergonomics and occupational health and safety. This book explains how studies conducted in a simulated virtual world are making it possible to test new solutions for designed workstations, offering a high degree of ease for introducing modifications and eliminating risk and work-related accidents. Virtual reality techniques offer a wide range of possibilities including increasing the cognitive abilities of the elderly, adapting workstations for people with disabilities and special needs, and remote control of machines using collaborative robots. Detailed discussions include: Testing protective devices, safety systems, and the numerical reconstruction of work accidents Using computer simulation in generic virtual environments On the one hand, it is a self-study book made so by well-crafted and numerous examples. On the other hand, through a detailed analysis of the virtual reality from a point of view of work safety and ergonomics and health improvement. Ewa Grabska, Jagiellonian University, Kraków, Poland Noteworthy is the broad scope and diversity of the addressed problems, ranging from training employees using VR environments with different degrees of perceived reality; training and rehabilitation of the elderly; to designing, testing, modifying, and adapting workplaces to various needs including those of disabled workers; to simulation and investigation of the cause of accidents at a workplace. Andrzej Krawiecki, Warsaw University of Technology, Warsaw, Poland

Download or read book Emerging Chemical Risks in the Work Environment written by Małgorzata Pośniak and published by CRC Press. This book was released on 2020-06-08 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Around the world, the production and use of nanomaterials, as well as carcinogenic, mutagenic, reprotoxic substances (CMR) and endocrine disruptors has systematically increased. The increase in production has exposed workers to hazardous substances in practically all branches of the world economy. Readers will have access to up-to-date and comprehensive knowledge on emerging risks related to nanomaterials, endocrine disruptors, reprotoxic, carcinogenic and mutagenic substances, which are related to the development of technologies and workplaces. The book will provide the tools for occupational risk assessment of chemical substances for which there are no safety levels of exposure as well as an indication of methods and measurements to protect human health and reduce chemical risks at the workplace. This book creates awareness for employers, employees and safety experts about emerging risks related to chemical agents resulting in the reduction of cancer, reproductive system diseases, cases of abnormal child development, hormonal system disorders leading to abnormal metabolism, obesity, and diabetes. Features: Comprehensive information on emerging and newly identified chemical hazards Delivers the latest data on methods and tools for identification, assessing and reducing health risks Provides practical occupational safety advice and recommendations Real life examples from measurements carried out in the workplaces "The monograph, due to the high universality of its considerations, can be addressed to a very wide audience. It is an important compendium of knowledge, which can be used by health and safety services, employers, people designing new technologies and those interested in this issue. It is a valuable and up-to-date study, among others because it uses the latest literature and quotes current legal acts.” —Sławomir Czerczak, Nofer Institute of Occupational Medicine, Poland

Download or read book Electromagnetic Ergonomics written by Jolanta Karpowicz and published by CRC Press. This book was released on 2023-08-21 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ergonomics is the branch of engineering science in which biological science is used to study the relationship between workers and their environments. Because of the use of electricity for many purposes, one environmental factor that has become omnipresent today is the electromagnetic field, also referred to as electromagnetic radiation or a fraction of the non-ionizing radiation. The complex interactions of electromagnetic energy with material objects contribute to ergonomics issues because they can cause health hazards in workers, trigger accidental situations, limit the ability of workers to work safely and disturb the function of electronic devices, including medical implants, etc. A better understanding of complex electromagnetic issues in the work environment is considered in this book. This title will be beneficial to workers affected by electromagnetic hazards including wireless transfer of information or power, wireless (induction) heating, joining metal elements with electric-supplied techniques, capacitive heating of dielectric materials, physiotherapeutic or cosmetic electromagnetic treatments, antitheft gates and other monitoring or control systems using wireless solutions, electric transportation and many more. It will help prevent common misunderstandings about electromagnetic hazards and sufficiently reduce where they appear. Electromagnetic Ergonomics is designed to have a positive influence on public health and worker safety in the work environment and brings broad benefits, in particular with respect to research planning and the interpretation of the results, as well as the implementation of science-based evidence regarding the evaluation and elimination of EMF hazards in the operations of enterprises and environmental, labor and sanitary inspections, as well as government regulators responsible for environmental safety issues in the workplace and the daily life environment.

Download or read book Individual and Occupational Determinants written by Joanna Bugajska and published by CRC Press. This book was released on 2020-09-23 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are individual and professional factors that have the greatest impact on the preservation of work ability for people of advanced age, and people with chronic health issues and disabilities. This text examines the demographic trends in the population and shows that proper functioning in their lives is only possible if people are provided with appropriate psychosocial and physical working conditions. This publication discusses physiological changes that occur with age and influence work performance. It presents the concept of applying the International Classification of Functioning, Disability and Health (ICF) in order to assess the work ability of people with disabilities. It shows, using examples and case studies, that practical activities aimed at appropriate working conditions for people of advanced age, and people with health issues and disabilities, will have excellent work ability. Features Presents a comprehensive approach to workplace tolerance for people with health issues Offers an innovated in-depth evaluation of the Work Ability Index (WAI) Presents applying the International Classification of Functioning, Disability and Health (ICF) to access the work ability of people with disabilities Outlines actions that should be taken to maintain work ability for people of advanced age or with disabilities Provides real case studies and analysis. "Demographic changes, especially those related to aging, belong to the main changes occurring in the contemporary working environment. Thus, preserving work ability in the older population as well as [populations with] health concerns are among the most important challenges of today. Accordingly, the monograph fits into the most recent issues of [this] public health area, focusing on work ability in populations at risk of social exclusion, also occupational exclusion. These are older people, persons with chronic diseases and those with different types of disabilities. In my opinion, highlighting the problem of work ability in the context of aging by the authors, in such a broad understanding, is extremely valuable and useful and the presented research outcome is an authentic and very much expected contribution to the discussion on this issue. The topic has been thoroughly presented, which undoubtedly results from the interdisciplinarity of the group of authors including specialists in work physiology, physicians and physiotherapists. The monograph provides a very measurable and reliable knowledge in this field. Combining the theory with the presentation of the authors’ research outcomes is an unquestionable advantage of the monograph...". —Jolanta Walusiak-Skorupa, Nofer Institute of Occupational Medicine, Łódź, Poland

Download or read book Healthy Worker and Healthy Organization written by Dorota Żołnierczyk-Zreda and published by CRC Press. This book was released on 2020-08-09 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents research on the determinants of workers’ health (physical and mental well-being) and the organization’s health (performance and culture). It addresses the impact of psychosocial working conditions on workers’ well-being, and their performance, productivity, innovation, and morale at work. Discusses how to manage workers to enable them to be engaged and creative Raises employee awareness on how to maintain good physical and mental health at work Covers how to work beyond retirement age Presents how to design a work environment that prevents counterproductive behaviors Covers work–life balance and how it can affect work This book is aimed at professionals, postgraduate students, scientists, and practitioners in the fields of work and health psychology, management, occupational health and safety, and human resource management.

Download or read book Emotional Labor in Work with Patients and Clients written by Dorota Żołnierczyk-Zreda and published by CRC Press. This book was released on 2020-08-11 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes psychosocial working conditions that negatively impact the mental and physical well-being of employees of various “assistance-related” professional groups, as well as individuals whose work is related to contact with demanding clients. It offers concepts and research on the causes and effects of emotional burden (most often manifested as stress and burnout) when working with patients, children, and clients. The book provides a detailed analysis of various aspects of emotional burden at work. It includes a description of studies carried out in 5 different professional groups that were exposed to emotional burden during emotional work and emotional labour. The book discusses the application of known and international diagnostic methods and provides an intercultural comparison. The current diagnosis of stress and burnout, as well as physical and mental health of individuals performing emotional work will be covered, as well as offering practical solutions on assistance for individuals based on the diagnosis of their health. This book is for any professional or aspiring professional in the field, including postgraduate students. Scientists and practitioners in the field of work and health psychology, management, occupational health and safety, and HR will find this book of interest. Employers of assistance and services sectors, authorities formulating employment laws, lawyers, and occupational medicine physicians are also among this book’s top audience.

Download or read book Assessing Nanoparticle Risks to Human Health written by Gurumurthy Ramachandran and published by William Andrew. This book was released on 2016-07-21 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assessing Nanoparticle Risks to Human Health provides a systematic overview of nanoparticle risks and considers the limitations of this paradigm in a context where extreme uncertainties prevail. As well as exploring conventional risk assessment methodology, the contributing authors investigate several alternate approaches. The adequacy of current frameworks for risk management and regulatory oversights, including corporate approaches in the US and EU, are explored, and suggestions are made as to how these frameworks can be modified to make them more efficient and effective.Presenting a coherent framework for analysis of the available information, this book presents the latest scientific understanding of the toxicity and health effects of nanoparticles, the technical issues relating to exposure assessment and management, and the ways in which the current risk paradigm can be used/modified to deal with the challenges of nanoparticle risks.All chapters of this new edition have been thoroughly updated to reflect the many changes in the field since the first edition. Additions and updates in the second edition of the book include: - New exposure assessment strategies for nanomaterials including life cycle exposure assessment approaches and detailed information on nanoparticle exposure control and protection in the workplace. - A state-of-the-art scientific update on the hazard and risk assessment of nanomaterials: discussion of key additional publications on the toxicology and biokinetics of nanomaterials; available data and methods to characterize the health hazard and risk of exposure to nanomaterials in the workplace; additional examples of the use of such data and methods to develop occupational safety and health guidance; and discussion of progress to date, ongoing efforts, and remaining challenges in nanomaterials hazard and risk characterization. - New studies on the use of expert judgment in nanotechnology. - Quantitative data from Lawrence Berkeley National Laboratory's 4-phase study. - A description and evaluation of new CB tools and new ISO technical specifications. - A comprehensive update of the legal frameworks in the US and the EU. With the second edition of Assessing Nanoparticle Risks to Human Health Prof. Ramachandran provides researchers and practitioners producing or using nanoparticles, or those involved in nanomaterials risk assessments, technology, health science, policy, safety, environment and regulatory aspects an invaluable reference to adopt the right technologies and strategies and to comply to legal frameworks and regulations. For policy makers and advisory firms it provides the knowledge needed to advise on compliance with or development of new regulations on nanomaterials. - Makes essential reading for risk assessment professionals, companies working with nanoparticles, nanotechnology research groups and regulators - Explores the use of risk assessment methodologies in an occupational health setting, and their limitations - Provides a framework for evidence-based decision making in a context with many uncertainties

Download or read book Nanoengineering written by Patricia I. Dolez and published by Elsevier. This book was released on 2015-05-26 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoengineering: Global Approaches to Health and Safety Issues provides a global vision on the impact of engineered nanomaterials both for the consumer/general public and in occupational settings. The book also presents a hint on what can be expected for the future from nanomaterials and their effects on our lives, both at home and at work. In addition, users will find valuable information on nanomaterials' irreplaceable value and their risks for health, safety, and environmental issues. Case studies illustrate key points and provide information on important processes. - Provides a global vision on the different aspects related to nanosafety and a synthesis of the information available - Gives all the information required for precision decision-making in a single book, offering both general public and occupational aspects - Contains separate chapters on each subject written by world-renowned contributors - Presents a complete vision of the problem, with perspectives on global approaches - Includes case studies that illustrate important processes