Download or read book Nano Scale Wettability and Adhesion of Free Standing Capped Carbon Nanotube Arrays written by Miray Ouzounian and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Countless organisms in nature have adapted high-aspect-ratio micro-/nano- fibrillar arrays on their functional surfaces for achieving special and often optimized functionalities using earthly abundant materials. Given a particular local environment, these 'natural designs' are intrinsically multifunctional, responsive to external stimuli, biocompatible, biodegradable, energy efficient and effective. One common challenge these natural fibrillar systems have to deal with is the presence of environmental water in all its three forms (i.e., vapor, liquid or solid) surrounding their habitats. This offers intriguing design inspirations for human engineering in energy, biomedical, and environmental remediation related applications. At the core of nanoscience and nanotechnology, rationally mimicking nature offers a promising route to create multifunctional superstructures that capture organisms and biological materials' intriguing responsive and self-adjusting properties. Carbon nanomaterials (e.g., carbon quantum dots, carbon nanotubes (CNTs), and graphene) have been widely investigated as advanced high performance structural and functional materials. Due to their high specific surface area, excellent electrical, thermal and mechanical properties, carbon nanomaterials are viewed as the ideal building blocks for achieving multi-functionality in the practice of biomimicry. Dry adhesives based on vertically aligned carbon nanotube arrays have shown remarkable adhesive strength (i.e., 10 times higher than that of geckos). However, little is known with regard to their wettability at the ultimate atomistic level, and how this may influence the adhesive performance and self-cleaning capabilities, despite water condensation and bridging have proven to be common phenomena at this length scale. Hence, using the CNTs and graphene as a microcosm example, this project focuses on on two critical issues: i) understanding how the nanostructures influence the properties and behavior of water nanodroplets, and ii) how water nanodroplets influence the nano mechanics of the nanostructures. The research findings have important implications in dry fibrillar adhesion, self-cleaning, water collection and purification, as well as seawater desalination applications.
Download or read book Surface Treatments to Tailor the Wettability of Carbon Nanotube Arrays written by Lvmeng He and published by . This book was released on 2015 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have gained great attention due to their excellent mechanical, electrical, and thermal properties. Carbon nanotube (CNT) arrays attached to solid substrates resemble a nano-carpet and have potentials in a variety of devices. In this study, the focus is to investigate the surface modification approaches of CNT carpets on flat (compressed) graphite. Wettability, or permeation of a liquid such as water into the CNT strands, may play very significant roles in many applications where a CNT-coated device may be used in aqueous environment. Short-term microwave plasma treatments were used in this project to functionalize CNT carpets for wettability. Hydrophilic/ hydrophobic behavior, measured by the contact angle of water, could be well tuned by controlling the exposure time. A simple method to reverse the changes caused by plasma is to anneal in air at a temperature of 110 °C. The CNT carpets could be cycled between hydrophobic and hydrophilic by repeated treatments of plasma and air annealing. The extent and ease of cycling depended on the morphology of the CNT carpets. We investigated the influence of surface nanostructure, morphology and surface chemistry on wettability. Nanostructure and morphology of CNT arrays was studied using field emission scanning electron microscopy (FESEM). The chemical composition of the surface was investigated by X-ray photoelectron spectroscopy (XPS). Pure CNT carpets are superhydrophobic (contact angle > 160°) as long as they are well aligned and do not contain covalently bonded oxygen groups. Superhydrophobicity may be lost, or contact angle decreased, if either alignment of CNTs is disturbed or covalent oxygen-containing groups bind to its surface. Young’s, Wenzel’s and Cassie-Baxter regimes are three models of contact angle that are used to explain these observations. The wetting state and contact angle of hydrophobic CNT arrays were compared with the values predicted by Cassie-Baxter equation on pristine CNT carpets. The morphological parameter was obtained by measuring multiscale dimensions of CNT carpets from SEM images. The chemical parameter represented by inherent contact angle was obtained by measuring contact angle on the graphitic materials, and reviewing the literature values reported on graphite and graphene surfaces. As an example of how wettability may influence an engineering property such as water flow, CNT arrays were synthesized on carbon fiber cloth. The flow of water through this porous fabric was tested. It was seen that water flow was enhanced by CNT attachment, which may be attributed to drag reduction on super-hydrophobic surface. However, making the CNT carpets fully hydrophilic through plasma treatment seemed to further increase overall water flow rates, which may raise the possibility of capillary transport through hydrophilic nano-carpet. These effects need to be investigated more carefully in future for better understanding.
Download or read book Handbook of Visual Display Technology written by Janglin Chen and published by Springer. This book was released on 2012-01-23 with total page 2700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. With expert contributions from over 150 international display professionals and academic researchers, it covers all classes of display device and discusses established principles, emergent technologies, and particular areas of application.
Download or read book Wetting and Wettability written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2015-12-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the liquid 's surface, the molecules have fewer neighbors in comparison with the bulk volume. As a result, the energy interaction shows itself in the surface tension. Traditionally, the surface tension can be assumed as a force in the unit of the length which can be counted by the unit of Newton on squared meter, or energy on the units of the surface. The surface tension, implies the interface between liquid and vapor, which is an example of the surface tensions. The equilibrium between these surface tensions, decides that a droplet on a solid surface, would have a droplet form or will change to layer form. This book collects new developments in wetting and wettability science.
Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
Download or read book Nanoscale Science and Technology written by Robert Kelsall and published by John Wiley & Sons. This book was released on 2005-11-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a vital new area of research and development addressing the control, modification and fabrication of materials, structures and devices with nanometre precision and the synthesis of such structures into systems of micro- and macroscopic dimensions. Future applications of nanoscale science and technology include motors smaller than the diameter of a human hair and single-celled organisms programmed to fabricate materials with nanometer precision. Miniaturisation has revolutionised the semiconductor industry by making possible inexpensive integrated electronic circuits comprised of devices and wires with sub-micrometer dimensions. These integrated circuits are now ubiquitous, controlling everything from cars to toasters. The next level of miniaturisation, beyond sub-micrometer dimensions into nanoscale dimensions (invisible to the unaided human eye) is a booming area of research and development. This is a very hot area of research with large amounts of venture capital and government funding being invested worldwide, as such Nanoscale Science and Technology has a broad appeal based upon an interdisciplinary approach, covering aspects of physics, chemistry, biology, materials science and electronic engineering. Kelsall et al present a coherent approach to nanoscale sciences, which will be invaluable to graduate level students and researchers and practising engineers and product designers.
Download or read book Carbon Nanotubes for Interconnects written by Aida Todri-Sanial and published by Springer. This book was released on 2018-05-30 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference on the use of carbon nanotubes (CNTs) as interconnect material for horizontal, on-chip and 3D interconnects. The authors demonstrate the uses of bundles of CNTs, as innovative conducting material to fabricate interconnect through-silicon vias (TSVs), in order to improve the performance, reliability and integration of 3D integrated circuits (ICs). This book will be first to provide a coherent overview of exploiting carbon nanotubes for 3D interconnects covering aspects from processing, modeling, simulation, characterization and applications. Coverage also includes a thorough presentation of the application of CNTs as horizontal on-chip interconnects which can potentially revolutionize the nanoelectronics industry. This book is a must-read for anyone interested in the state-of-the-art on exploiting carbon nanotubes for interconnects for both 2D and 3D integrated circuits.
Download or read book Functionalization of Graphene written by Vasilios Georgakilas and published by John Wiley & Sons. This book was released on 2014-04-03 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: All set to become the standard reference on the topic, this book covers the most important procedures for chemical functionalization, making it an indispensable resource for all chemists, physicists, materials scientists and engineers entering or already working in the field. Expert authors share their knowledge on a wide range of different functional groups, including organic functional groups, hydrogen, halogen, nanoparticles and polymers.
Download or read book Springer Handbook of Nanomaterials written by Robert Vajtai and published by Springer Science & Business Media. This book was released on 2013-08-20 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Nanomaterials covers the description of materials which have dimension on the "nanoscale". The description of the nanomaterials in this Handbook follows the thorough but concise explanation of the synergy of structure, properties, processing and applications of the given material. The Handbook mainly describes materials in their solid phase; exceptions might be e.g. small sized liquid aerosols or gas bubbles in liquids. The materials are organized by their dimensionality. Zero dimensional structures collect clusters, nanoparticles and quantum dots, one dimensional are nanowires and nanotubes, while two dimensional are represented by thin films and surfaces. The chapters in these larger topics are written on a specific materials and dimensionality combination, e.g. ceramic nanowires. Chapters are authored by well-established and well-known scientists of the particular field. They have measurable part of publications and an important role in establishing new knowledge of the particular field.
Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.
Download or read book Chemically Modified Electrodes written by and published by John Wiley & Sons. This book was released on 2009-07-10 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an international group of expert authors, this book includes the latest trends in tailoring interfacial properties electrochemically. The chapters cover various organic and inorganic compounds, with applications ranging from electrochemistry to nanotechnology and biology. Of interest to physical, surface and electrochemists, materials scientists and physicists.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.
Download or read book Aligned Carbon Nanotubes written by Zhifeng Ren and published by Springer Science & Business Media. This book was released on 2012-09-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a survey of the physics and fabrication of carbon nanotubes and their applications in optics, electronics, chemistry and biotechnology. It focuses on the structural characterization of various carbon nanotubes, fabrication of vertically or parallel aligned carbon nanotubes on substrates or in composites, physical properties for their alignment, and applications of aligned carbon nanotubes in field emission, optical antennas, light transmission, solar cells, chemical devices, bio-devices, and many others. Major fabrication methods are illustrated in detail, particularly the most widely used PECVD growth technique on which various device integration schemes are based, followed by applications such as electrical interconnects, nanodiodes, optical antennas, and nanocoax solar cells, whereas current limitations and challenges are also be discussed to lay the foundation for future developments.
Download or read book Electronic Properties of Carbon Nanotubes written by Leroy Sidney and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are tubular cylinders of carbon atoms that have extraordinary mechanical, electrical, thermal, optical and chemical properties. CNTs typically have diameters ranging from 1 nanometer (nm) up to 50 nma nanometer is one thousand millionth of a meter. Typical CNT lengths are several micronsseveral thousand nanometers long; by contrast, Nanocomp's produced fibers are measured in millimetersthousands of times longer than all other commercially produced CNTs. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. In the powdery format offered by all CNT producers (but for NTI), applications are limited to the properties possible by this form factore.g. additive active ingredients in semiconductors, liquid crystal displays (LCDs), sensors, and other uses in which these powders add some level of functional performance. Due to its fiber length and its form factors, NTI delivers strength and conductivity unlike any other commercial CNT producer, and so can address a much broader array of applications for which its material rivals copper and aluminum in conductivity, and steel, aluminum, carbon fibers and glass composites where strength and lightweight matter. Carbon nanotubes have been a subject of exhaustive research for a wide range of applications. The purpose of this book entitled Properties of Carbon Nanotubes is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. This book discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Eventually, the book follows a significant amount of work in the industry applications of carbon nanotubes.
Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.
Download or read book Nanoparticle Technology Handbook written by Masuo Hosokawa and published by Elsevier. This book was released on 2007-10-19 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticle technology, which handles the preparation, processing, application and characterisation of nanoparticles, is a new and revolutionary technology. It becomes the core of nanotechnology as an extension of the conventional Fine Particle / Powder Technology. Nanoparticle technology plays an important role in the implementation of nanotechnology in many engineering and industrial fields including electronic devices, advanced ceramics, new batteries, engineered catalysts, functional paint and ink, Drug Delivery System, biotechnology, etc.; and makes use of the unique properties of the nanoparticles which are completely different from those of the bulk materials.This new handbook is the first to explain complete aspects of nanoparticles with many application examples showing their advantages and advanced development. There are handbooks which briefly mention the nanosized particles or their related applications, but no handbook describing the complete aspects of nanoparticles has been published so far.The handbook elucidates of the basic properties of nanoparticles and various nanostructural materials with their characterisation methods in the first part. It also introduces more than 40 examples of practical and potential uses of nanoparticles in the later part dealing with applications. It is intended to give readers a clear picture of nanoparticles as well as new ideas or hints on their applications to create new materials or to improve the performance of the advanced functional materials developed with the nanoparticles.* Introduces all aspects of nanoparticle technology, from the fundamentals to applications.* Includes basic information on the preparation through to the characterization of nanoparticles from various viewpoints * Includes information on nanostructures, which play an important role in practical applications.
