Download or read book Mutual Recognition of National Measurement Standards and of Calibration and Measurement Certificates Issued by National Metrology Institutes Paris 14 October 1999 written by Comité international des poids et mesures and published by . This book was released on 1999 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Gas Based Temperature and Pressure Measurements written by Franco Pavese and published by Springer Science & Business Media. This book was released on 2012-09-28 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2nd edition volume of Modern Gas-Based Temperature and Pressure Measurements follows the first publication in 1992. It collects a much larger set of information, reference data, and bibliography in temperature and pressure metrology of gaseous substances, including the physical-chemical issues related to gaseous substances. The book provides solutions to practical applications where gases are used in different thermodynamic conditions. Modern Gas-Based Temperature and Pressure Measurements, 2nd edition is the only comprehensive survey of methods for pressure measurement in gaseous media used in the medium-to-low pressure range closely connected with thermometry. It assembles current information on thermometry and manometry that involve the use of gaseous substances which are likely to be valid methods for the future. As such, it is an important resource for the researcher. This edition is updated through the very latest scientific and technical developments of gas-based temperature and pressure measurements using thermometry and manometry, and brings all of the techniques together under one cover. This book fills the gap in international literature, as no other recently published book provides a comprehensive survey for gaseous media closely connected with thermometry. Updates in this new edition include revised appendices and new chapters on Mutual Recognition Agreement of the Comité International des Poids et Mesures and its main applications, and developments in the European Metrology Society.
Download or read book Metrology and Physical Constants written by A. Di Giuseppe and published by IOS Press. This book was released on 2013-10-21 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability and accuracy of systems of measurement continue to advance. We are about to enter a period of the most stable measurement system we can imagine with the anticipated new definitions of the SI units of measurement; a direct link between fundamental physics and metrology which will eliminate the current definition of the kilogram, until now based upon an artifact. This book presents selected papers from Course 185 of the Enrico Fermi International School of Physics, held in Varenna, Italy, in July 2012 and jointly organized with the Bureau International des Poids et Mesures (BIPM). The papers delivered at the school covered some of the most advanced topics in the discipline of metrology, including nano-technologies; quantum information and quantum devices; biology and medicine; food; surface quality; ionising radiation for health, environment, art and archaeology; and climate. The continuous and striking advances in basic research concerning atomic frequency standards operating both in the visible range and at microwave levels and the applications to satellite systems are also considered, in the framework of a historical review of the international organization of metrology, as are the problems inherent in uncertainty statements and definitions. This book will be of interest to all those whose work involves scientific measurement at the highest levels of accuracy.
Download or read book The Reform of the International System of Units SI written by Nadine de Courtenay and published by Routledge. This book was released on 2019-01-15 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems of units still fail to attract the philosophical attention they deserve, but this could change with the current reform of the International System of Units (SI). Most of the SI base units will henceforth be based on certain laws of nature and a choice of fundamental constants whose values will be frozen. The theoretical, experimental and institutional work required to implement the reform highlights the entanglement of scientific, technological and social features in scientific enterprise, while it also invites a philosophical inquiry that promises to overcome the tensions that have long obstructed science studies.
Download or read book Advanced Mathematical Computational Tools in Metrology V written by P. Ciarlini and published by World Scientific. This book was released on 2001 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in metrology depend on improvements in scientific and technical knowledge and in instrumentation quality, as well as on better use of advanced mathematical tools and development of new ones. In this volume, scientists from both the mathematical and the metrological fields exchange their experiences. Industrial sectors, such as instrumentation and software, will benefit from this exchange, since metrology has a high impact on the overall quality of industrial products, and applied mathematics is becoming more and more important in industrial processes.This book is of interest to people in universities, research centers and industries who are involved in measurements and need advanced mathematical tools to solve their problems, and also to those developing such mathematical tools.
Download or read book Advanced Mathematical Computational Tools in Metrology Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book PHYSICAL METHODS INSTRUMENTS AND MEASUREMENTS Volume I written by Yuri Mikhailovich Tsipenyuk and published by EOLSS Publications. This book was released on 2009-04-15 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Methods, Instruments and Measurements theme is a component of the Encyclopedia of Physical Sciences, Engineering and Technology Resources which is part of the global Encyclopedia of Life Support Systems (EOLSS), an integrated compendium of twenty Encyclopedias. The Theme provides a complete survey of the present status of our knowledge of modern physical instruments and measurements. It is organized in the following main topics: Measurements and Measurement Standards; Sources of Particles and Radiation, Detectors and Sensors; Imaging and Characterizing – Trace Element Analysis; Technology of Physical Experiments; Applications of Measurements and Instrumentation which are then expanded into multiple subtopics, each as a chapter. These four volumes are aimed at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs
Download or read book Metrology and Fundamental Constants written by Theo W. Hänsch and published by IOS Press. This book was released on 2007 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the exciting characteristics of metrology is its intimate relationship between fundamental physics and the leading edge of technology which is needed to perform advanced and challenging experiments and measurements. This title includes a set of lectures which present the relevant progress in Metrology.
Download or read book Metrology and Theory of Measurement written by Valery A. Slaev and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-12-02 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is the science of measurements. As such, it deals with the problem of obtaining knowledge of physical reality through its quantifiable properties. The problems of measurement and of measurement accuracy are central to all natural and technical sciences. Now in its second edition, this monograph conveys the fundamental theory of measurement and provides some algorithms for result testing and validation.
Download or read book Springer Handbook of Metrology and Testing written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2011-07-22 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or manufacturing facility must be able to be reproduced accurately anywhere in the world. The book integrates knowledge from basic sciences and engineering disciplines, compiled by experts from internationally known metrology and testing institutions, and academe, as well as from industry, and conformity-assessment and accreditation bodies. The Commission of the European Union has expressed this as there is no science without measurements, no quality without testing, and no global markets without standards.
Download or read book From Artefacts to Atoms written by Terry Quinn and published by Oxford University Press. This book was released on 2011-11-04 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Bureau of Weights and Measures (BIPM) is currently implementing the greatest change ever in the world's system of weights and measures -- it is redefining the kilogram, the final artefact standard, and reorganizing the system of international units. This book tells the inside story of what led to these changes, from the events surrounding the founding of the BIPM in 1875 -- a landmark in the history of international cooperation -- to the present. It traces not only the evolution of the science, but also the story of the key individuals and events. The BIPM was the first international scientific laboratory. Founded in 1875 by the Metre Convention, its original tasks were to conserve the new international standards of the metre and the kilogram, to carry out calibrations for Member States and undertake research to advance measurement science. The book is based on the substantial archive of the BIPM which, from the very beginning, recounts the many discussions and arguments first as to whether and how such an institute should be created and in due course, how over the next one hundred and thirty years it should develop. Despite many national and personal rivalries, the institute actually created was admirably suited to its declared tasks. In the years and decades that followed, the scientific work of the small group of men who made up its first staff was of a very high order. One of the early Directors received the Nobel Prize for physics in 1920 for his discovery of invar. The international governing Board of the institute, the International Committee of Weights and Measures, has guided the institute from one charged with the conservation of the prototype artefacts to one now at the centre of world metrology and preparing for the redefinition of the last remaining artifact, the kilogram, in terms of a fixed value for one of the fundamental constants of physics, the Planck constant
Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Viii written by Franco Pavese and published by World Scientific. This book was released on 2009-04-15 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields.This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Metrology from Physics Fundamentals to Quality of Life written by P. Tavella and published by IOS Press. This book was released on 2018-01-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is a constantly evolving field, and one which has developed in many ways in the last four decades. This book presents the proceedings of the Enrico Fermi Summer School on the topic of Metrology, held in Varenna, Italy, from 26 June to 6 July 2017. This was the 6th Enrico Fermi summer school devoted to metrology, the first having been held in 1976. The 2017 program addressed two major new directions for metrology: the work done in preparation for a possible re-definition of four of the base units of the SI in 2018, and the impact of the application of metrology to issues addressing quality of life – such as global climate change and clinical and food analysis – on science, citizens and society. The lectures were grouped into three modules: metrology for quality of life; fundamentals of metrology; and physical metrology and fundamental constants, and topics covered included food supply and safety; biomarkers; monitoring climate and air quality; new IS units; measurement uncertainty; fundamental constants; electrical metrology; optical frequency standards; and photometry and light metrology. The book provides an overview of the topics and changes relevant to metrology today, and will be of interest to both academics and all those whose work involves any of the various aspects of this field.
Download or read book Mutual Recognition of National Measurement Standards and of Calibration and Measurement Certificates Issued by National Metrology Institutes NMIs Paris 14 October 1999 written by and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Natural Radiation Environment VII written by J.P. McLaughlin and published by Elsevier. This book was released on 2005-03-30 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Natural Radiation Environment Symposium (NRE VII), the Seventh in the NRE series, which commenced forty years ago in 1963 at Rice University Texas, was held in Rhodes (Greece) in May 2002. During the intervening four decades the research work presented at these NRE Symposia has contributed to a deeper understanding of natural radiation and in particular of its contribution to human radiation exposures.It is clear from the quality and diversity of the 143 papers in this volume of Radioactivity in the Environment series that the study of the natural radiation environment is an active and continually expanding field of research. The papers in this volume fall into a number of main and topical research areas namely: - the measurement and behaviour of natural radionuclides in the environment - cosmic radiation measurement and dosimetry - the external penetrating radiation field at ground level - TENR (Technologically Enhanced Natural Radiation) and NORM (Naturally Occurring Radioactive Materials) studies - assessment of the health effects of radon - regulatory aspects of natural radiation exposuresIn these papers the results of many new surveys of natural radionuclide levels in the environment and of improved methods of detection are described. While some of the natural radiation sources investigated are unmodified by human activity, many accounts are given here of exposures to natural sources which have been enhanced by technology. Such TENR and NORM exposures are shown to range from activities such as mining, oil and gas exploitation, the use of industrial by-products as building materials, to space travel to name but a few. In several cases quite high doses to some individuals are shown to occur. Accounts are given here of methods to prevent and reduce exposures to such sources.
Download or read book Transverse Disciplines in Metrology written by French College of Metrology and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on The International Metrology Congress meeting, this reference examines the evolution of metrology, and its applications in industry, environment and safety, health and medicine, economy and quality, and new information and communication technologies; details the improvement of measurement procedures to guarantee the quality of products and processes; and discusses the development of metrology linked to innovating technologies. The themes of the Congress (quality and reliability of measurement, measurement uncertainties, calibration, verification, accreditation, sensory metrology, regulations and legal metrology) are developed either in a general way or applied to a specific economic sector or to a specific scientific field.
Download or read book OIML Bulletin written by and published by . This book was released on 2000 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt:
