Download or read book Foam Fractionation written by Paul Stevenson and published by CRC Press. This book was released on 2014-02-13 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foam fractionation is a separation process in which proteins and other amphipathic species adsorb to the surface of bubbles. The bubbles are then removed from the solution in the form of foam at the top of a column. Due to its cost-effectiveness, foam fractionation has the potential for rapid commercial growth, especially in biotechnology. To assist in the widespread adoption of this highly affordable yet powerful process, Foam Fractionation: Principles and Process Design: Provides a systematic explanation of the underlying physics of foam fractionation Discusses the fundamentals of molecular adsorption to gas liquid interfaces and the dynamics of foam Describes foam fractionation process intensification strategies Supplies design guidance for plant-scale installations Contains the latest knowledge of foam fractionation transport processes Presents a case study of the world’s largest commercial foam fractionation plant producing the food preservative Nisin Foam Fractionation: Principles and Process Design capitalizes on the authors’ extensive practical experience of foam fractionation and allied processes to give process engineers, industrial designers, chemical engineers, academics, and graduate students alike a greater understanding of the mechanistic basis and real-world applications of foam fractionation.
Download or read book Foam Engineering written by Paul Stevenson and published by John Wiley & Sons. This book was released on 2012-01-03 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing contributions from leading academic and industrial researchers, this book provides a much needed update of foam science research. The first section of the book presents an accessible summary of the theory and fundamentals of foams. This includes chapters on morphology, drainage, Ostwald ripening, coalescence, rheology, and pneumatic foams. The second section demonstrates how this theory is used in a wide range of industrial applications, including foam fractionation, froth flotation and foam mitigation. It includes chapters on suprafroths, flotation of oil sands, foams in enhancing petroleum recovery, Gas-liquid Mass Transfer in foam, foams in glass manufacturing, fire-fighting foam technology and consumer product foams. Key features: Foam fractionation is an exciting and emerging technology, starting to gain significant attention Discusses a vital topic for many industries, especially mineral processing, petroleum engineering, bioengineering, consumer products and food sector Links foam science theory to industrial applications, making it accessible to an engineering science audience Summarizes the latest developments in this rapidly progressing area of research Contains contributions from leading international researchers from academia and industry
Download or read book Foam Films and Foams written by Dotchi Exerowa and published by CRC Press. This book was released on 2018-07-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail the scientific philosophy of the formation and stabilization-destabilization of foams. It presents all hierarchical steps of a foam, starting from the properties of adsorption layers formed by foaming agents, discussing the properties of foam films as the building blocks of a foam, and then describing details of real foams, including many fields of application. The information presented in the book is useful to people working on the formulation of foams or attempting to avoid or destruct foams in unwanted situations.
Download or read book Aquaculture Engineering written by Odd-Ivar Lekang and published by John Wiley & Sons. This book was released on 2019-10-25 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of the comprehensive book that explores the principles and applications of aquaculture engineering Since the publication of the first edition of Aquaculture Engineering there have been many advances in the industry. The revised and thoroughly updated third edition of Aquaculture Engineering covers the principles and applications of all major facets of aquaculture engineering and the newest developments in the field. Written by a noted expert on the topic, the new edition highlights information on new areas of interest including RAS technology and offshore fish farming. Comprehensive in scope, the book examines a range of topics including: water transportation and treatment; feed and feeding systems; fish transportation and grading; cleaning and waste handling; instrumentation and monitoring; removal of particles; aeration and oxygenation; recirculation and water reuse systems; ponds; and the design and construction of aquaculture facilities. This important book: Presents an updated review of the basic principles and applications in aquaculture engineering Includes information on new areas of focus; RAS technology and offshore fish farming Contains a revised edition of the classic resource on aquaculture engineering Continues to offer an authoritative guide written by a leading expert in the field Written for aquaculture scientists and managers, engineers, equipment manufacturers and suppliers, and biological scientists, the third edition of Aquaculture Engineering is the authoritative guide to the topic that has been updated to include the most recent developments in the industry.
Download or read book Multifunctional Microbial Biosurfactants written by Pankaj Kumar and published by Springer Nature. This book was released on 2023-07-29 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of biosurfactants as biobased compounds, and highlights novel applications in several industries, including biotech, food processing, cosmetic, oil recovery/petroleum, pharmaceutical, detergent and textile. In the past few decades, biosurfactants have emerged as promising alternative surface-active agents to chemical surfactants due to their high biodegradability, low toxicity, multi-functionality under extreme pH and temperature conditions, long-term physicochemical stability, and their production from renewable sources. This book presents the fundamental aspects (classification, structure, genetics, and properties) of biosurfactants and how their features contribute to the global bioeconomy. Chapters from expert contributors discuss the latest screening, purification and characterization methods of new biosurfactants and biosurfactant-producing fungi and bacteria, including extremophiles. Particular attention is given to the role of biosurfactants in the formulation of sustainable agrochemicals, and their application as eco-friendly mosquitocidal agents, and biopesticides. Readers will discover a perspective on the antiviral activity of biosurfactants, in which the latest in vitro and in silico studies are discussed. Readers will also find more about the foremost therapeutic attributes of biosurfactant-mediated nanoparticles as next-generation drug delivery systems. Given its breadth, this book appeals to a wide readership, from students and academic researchers to scientists and professionals from industry, interested in the study and application of microbial surfactants.
Download or read book Biosurfactants written by Naim Kosaric and published by CRC Press. This book was released on 2014-11-03 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stresses the Potential Applications of Biosurfactants in Various Industries Environmental concerns and a demand for sustainable chemical production have become important issues in recent years. As a result, microbial biosurfactant-producing systems are gaining momentum as potential replacements for chemical surfactants. Biosurfactants: Production and Utilization—Processes, Technologies, and Economics explores the production, utilization, and industrial/economic use of biosurfactants in modern biotechnology. This book represents comprehensive material developed by contemporary experts in the field. Focusing on research and developments within the last 20 years, it highlights relevant changes in the industry. It provides a detailed account of the current applications of biosurfactants, considers the potential for further environmental, biological, and industrial applications, and concentrates on surfactants and organisms with possibilities for future use. Emphasizes Process Scale-Up and Commercialization Factoring in the industrial application of biosurfactant production based on renewable resources, the book determines how biosurfactants can enhance or replace the properties of chemically synthesized surface-active agents. It discusses moving beyond the laboratory scale of research and development and on to the industrial scale of commercial interest. The book consists of 17 chapters and features expert authors discussing topics that include: Understanding the regulatory processes controlling the production of biosurfactants Strategies for feasible commercial biosurfactant production Examples of cost analysis based on published information The viability of industrial applications in food, cosmetics, and pharmaceuticals Patents for future trends Biosurfactants: Production and Utilization—Processes, Technologies, and Economics contains special sections devoted to the overview and evaluation of specific patents relating to biosurfactants, and methods for production of biosurfactants on a laboratory and industrial/commercial scale. It also presents novel and proven applications for biosurfactants from a number of biotechnology laboratories and research facilities around the world. In addition, it introduces the reader to a variety of real-world industry techniques readily applicable for practical use.
Download or read book Biosurfactants written by Gloria Soberon-Chavez and published by Elsevier. This book was released on 2023-01-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosurfactants: Research and Development provides a thorough overview of biosurfactant research and development across a range of settings and industries, highlighting the novel use of enzymes, metabolic and genetic engineering in biosurfactant production and showcasing diverse experimental models and approaches. Sections discuss fundamental characteristics of biosurfactants, their physio-chemical properties, and their differences from chemically synthesize surfactants, different research approaches for the study of known biosurfactants, and the genetic manipulation of microorganisms to increase biosurfactant productivity, or to produce molecules with improved characteristics. Throughout the book, methods and approaches are discussed in easy-to-digest formats, with methods discussed, ranging from in silico approaches to classical biocatalysis omics analysis and metabolic engineering. - Provides a through overview of biosurfactant enzymes and microorganisms used in biosurfactant production - Features instruction in a wide range of research and development approaches, ranging from in silico techniques to classical biocatalysis omics analysis and metabolic engineering - Features chapter contributions from international leaders in the field
Download or read book Recycling in Textiles written by Youjiang Wang and published by Woodhead Publishing. This book was released on 2006-03-20 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increasing amount of waste is generated each year from textiles and their production. For economic and environmental reasons it is necessary that as much of this waste as possible is recycled instead of being disposed of in landfill sites. In reality the rate of textile recycling is still relatively low. On average, approximately ten million tonnes of textile waste is currently dumped in Europe and America each year. Considering the diversity of fibrous waste and structures, many technologies must work in concert in an integrated industry in order to increase the rate of recycling. Recycling in textiles shows how this can be achieved.The first part of the book introduces the subject by looking at the general issues involved and the technologies concerned. Part Two explores the chemical aspects of textile recycling. Part Three focuses on recycled textile products, including nonwovens and alternative fibres. Finally, the last part of the book discusses possible applications of recycled textiles, including using recycled products in the operating theatre, for soil stabilisation and in concrete reinforcement.Recycling in textiles presents several promising technologies and ideas for recycling systems. This is the first book of its kind to bring together textile recycling issues, technology, products, processes and applications. It will prove an invaluable guide to all those in the industry who are now looking for ways to recycle their textile waste. - Provides extensive coverage of this hot topic - An invaluable guide for all in the textile industry - Learn how to increase the rate of recycling
Download or read book Comprehensive Biotechnology written by and published by Newnes. This book was released on 2011-08-26 with total page 5304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Comprehensive Biotechnology, Six Volume Set continues the tradition of the first inclusive work on this dynamic field with up-to-date and essential entries on the principles and practice of biotechnology. The integration of the latest relevant science and industry practice with fundamental biotechnology concepts is presented with entries from internationally recognized world leaders in their given fields. With two volumes covering basic fundamentals, and four volumes of applications, from environmental biotechnology and safety to medical biotechnology and healthcare, this work serves the needs of newcomers as well as established experts combining the latest relevant science and industry practice in a manageable format. It is a multi-authored work, written by experts and vetted by a prestigious advisory board and group of volume editors who are biotechnology innovators and educators with international influence. All six volumes are published at the same time, not as a series; this is not a conventional encyclopedia but a symbiotic integration of brief articles on established topics and longer chapters on new emerging areas. Hyperlinks provide sources of extensive additional related information; material authored and edited by world-renown experts in all aspects of the broad multidisciplinary field of biotechnology Scope and nature of the work are vetted by a prestigious International Advisory Board including three Nobel laureates Each article carries a glossary and a professional summary of the authors indicating their appropriate credentials An extensive index for the entire publication gives a complete list of the many topics treated in the increasingly expanding field
Download or read book Foams written by J.J. Bikerman and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Foams: Theory and Industrial Applications, written by the undersigned and three collaborators and published in 1953, is still the only monograph on liquid foam in the English language. Naturally the science of foams had advanced in the intervening years so that a practically new book had to be prepared to give justice to the present state of our know ledge. This monograph has only one author and does not deal with solid foams, fire-fighting foams, and flotation, on which information is available elsewhere. The other applications of foam and its fundamental properties are reviewed at length and, whenever possible, attempts are made to reach the truth through a maze of conflicting evidence. February 1973 J. J. BIKERMAN Contents page Preface . v 1. General. Foam Films (Sections 1-22) 1 Foam Films 5 References 30 2. Formation and Structure (Sections 23-42) 33 Dispersion Methods 33 Condensation Methods 51 Foam Structure 59 References 62 3. Measurement of Foaminess (Sections 43-62) 65 Films and Bubbles 66 Foams. 76 References 94 4. Results of Foaminess Measurements (Sections 63-84) . 98 Poorly Foaming Liquids . 98 Strongly Foaming Liquids 108 Other Systems 132 References 140 5. Three-phase Foams (Sections 85-90) 149 References 157 6. Foam Drainage (Sections 91-106) 159 Experimental Data . 173 References 181 7. Mechanical Properties of Foams (Sections 107-122) 184 References 211 8. Optical Properties of Foams (Sections 123 -127) . 214 References 222 vii viii Contents 9.
Download or read book Adsorptive Bubble Separation Techniques written by Robert Lemlich and published by Elsevier. This book was released on 2012-12-02 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorptive Bubble Separation Techniques focuses on the mechanisms of the various adsorptive bubble separation methods. This book examines the various adsorptive bubble separation techniques, including ion flotation, foam fractionation, precipitate flotation, mineral flotation, bubble fractionation, and solvent sublation. Organized into 20 chapters, this book starts with an overview of the certain important properties of foam. This text then examines the results of several separations, as well as the results of additional studies into the mechanisms of the different techniques. Other chapters explain the studies of foam separation in the case of synthetic solutions, which provide a good knowledge of the extraction mechanisms of the radioactive cations, cesium, cerium, and strontium. This book discusses as well the experimental and theoretical work on foam separation done in Israel. The final chapter deals with the separation of surfactants and metallic ions at various places around the world. This book is a valuable resource for materials scientists, engineers, and chemists.
Download or read book A Study of Continuous Foam Fractionation written by Kenneth Edward Hastings and published by . This book was released on 1967 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Title author company Index to Reports Published by the U S Department of the Interior Office of Saline Water Through July 1972 written by Karl Otto Johnsson and published by . This book was released on 1972 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory Practice and Process Principles for Physical Separations written by Mark Phillips Freeman and published by . This book was released on 1981 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mass Transfer Operations for the Practicing Engineer written by Louis Theodore and published by John Wiley & Sons. This book was released on 2011-12-06 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable guide for problem solving in mass transfer operations This book takes a highly pragmatic approach to providing the principles and applications of mass transfer operations by offering a valuable, easily accessible guide to solving engineering problems. Both traditional and novel mass transfer processes receive treatment. As with all of the books in this series, emphasis is placed on an example-based approach to illustrating key engineering concepts. The book is divided into two major parts. It starts with the principles underlying engineering problems showing readers how to apply general engineering principles to the topic of mass transfer operations. It then goes on to provide step-by-step guidance for traditional mass transfer operations, including distillation, absorption and stripping, and adsorption, plus novel mass transfer processes. Essential topics for professional engineering exams are also covered. Geared towards chemical, environmental, civil, and mechanical engineers working on real-world industrial applications, Mass Transfer Operations for the Practicing Engineer features: Numerous sample problems and solutions with real-world applications Clear, precise explanations on how to carry out the basic calculations associated with mass transfer operations Coverage of topics from the ground up for readers without prior knowledge of the subject Overview of topics relevant to the ABET (Accreditation Board for Engineering and Technology) for those taking the Professional Engineering (PE) exams Appendix containing relevant mass transfer operation charts and tables
Download or read book Polymer Characterization by Liquid Chromatography written by G. Glöckner and published by Elsevier. This book was released on 1987-02-01 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main subject of this book is the characterization of plastics. To a high degree the properties of these polymers depend on the distribution of the molar mass and of other structural features, and small deviations frequently have a great effect. Therefore the characterization of polymers cannot be restricted to the determination of mean values but must yield information on these distributions. Using classical methods, the analytical fractionation of polymer homologues and structurally isomeric polymers is extremely time-consuming. Therefore, efficient chromatographic techniques are being increasingly employed in modern polymer characterization.In the first place, high-performance liquid chromatography is applied, in the form of size exclusion chromatography. It is also possible, however, to use other separation modes. More space is devoted to these other possibilities in this volume than is merited by their current range of applications, as the author believes that many separation problems will be solved by separation techniques of the non-exclusion type. Nevertheless, much emphasis is placed on size exclusion chromatography. Not only because of its current wide range of applications, but also because its relative importance, as a complement to other chromatographic techniques may even increase in the forthcoming years.This book is the first to cover all phenomena related to the above considerations. Starting with an introduction to basic liquid chromatography and to polymer science, it deals with the adsorption behaviour of polymers, with gradient techniques, with the kinetic band broadening in liquid chromatography, with instrumental features and packing materials. The book consists of four balanced sections and related information from about 1800 references is compiled in the tables. Some 250 figures and 30 tables will help give the reader a clear insight of the topics discussed. The book is aimed at helping the analyst or polymer chemist who is looking for information about chromatographic methods for the characterization of polymers.
Download or read book Separation Processes written by C. Judson King and published by Courier Corporation. This book was released on 2013-12-18 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published: New York: McGraw-Hill, 1971. 2nd ed. Includes a new introduction.
