Download or read book Multiscale Simulation Approach for Battery Production Systems written by Malte Schönemann and published by Springer. This book was released on 2017-01-05 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing the challenge of improving battery quality while reducing high costs and environmental impacts of the production, this book presents a multiscale simulation approach for battery production systems along with a software environment and an application procedure. Battery systems are among the most important technologies of the 21st century since they are enablers for the market success of electric vehicles and stationary energy storage solutions. However, the performance of batteries so far has limited possible applications. Addressing this challenge requires an interdisciplinary understanding of dynamic cause-effect relationships between processes, equipment, materials, and environmental conditions. The approach in this book supports the integrated evaluation of improvement measures and is usable for different planning horizons. It is applied to an exemplary battery cell production and module assembly in order to demonstrate the effectiveness and potential benefits of the simulation.

Download or read book Energy Related Material Flow Simulation in Production and Logistics written by Sigrid Wenzel and published by Springer Nature. This book was released on 2024-01-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides for the first time an overview on the current approaches and applications of energy aspects in production and logistics by the use of simulation techniques. During the last decade, the importance of energy in the material flow processes has become more and more important. The pressure to reduce the environmental footprint of production and logistics systems will even intensify in future. Therefore, enterprises have started to integrate the use of energy into their planning processes much more than before, even designing feedback loops, e.g., from energy control to production control. This receives additional attention with the increasing use of renewable, but less reliable, energy sources. Care must be taken to establish processes that aim to use energy when it is available. As an example, many industrial processes like melting or coating have significant energy demands, but could vary the point of time of its consumption within specific limits, leading to a very high complexity. ​ It discusses the construction and application of energy-specific performance indicators and analyzes the input information that needs to be acquired before implementing suitable models. On this basis, concrete technical solutions are introduced.

Download or read book Handbook On Smart Battery Cell Manufacturing The Power Of Digitalization written by Kai Peter Birke and published by World Scientific. This book was released on 2022-06-09 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation towards electric mobility requires the highest quality mass production of battery cells. However, few research in battery cell engineering focus beyond new cell chemistries. As a consequence, there exists a huge gap between basic battery research and comparable scientific approaches to battery cell production. This handbook bridges the gap between basic electrochemical battery cell research and battery cell production approaches.To run lithium-ion battery gigafactories successfully and sustainably, high-quality battery cell production processes and systems are required. The Handbook on Smart Battery Cell Manufacturing provides a comprehensive and well-structured analysis of every aspect of the manufacturing process of smart battery cell, including upscaling battery cell production, accompanied by many instructive practical examples of the digitalization of battery products and manufacturing systems using an integrated life cycle perspective.

Download or read book Integrated Planning of Heat Flows in Production Systems written by Denis Kurle and published by Springer. This book was released on 2018-02-10 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents an integrated planning concept for heat flows in production systems comprising various short term and long term related models. Detailed explanations about the modeling and implementation of all relevant system elements such as generic and specific machines types, technical building services (TBS), production planning and control aspects, heat storage units and (waste) heat designs follow. Due to resulting amounts of data, the concept foresees system level appropriate indicators and visualizations for a facilitatedevaluation of the model results. An application procedure embeds and describes all models as well.Three exemplary application cases demonstrate the applicability, including the manufacturing of shafts for automotive transmissions, a cooling water system and an academic learning environment.

Download or read book Planning of Eco efficient Process Chains for Automotive Component Manufacturing written by Christopher Schmidt and published by Springer Nature. This book was released on 2021-01-04 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the introduction of emerging manufacturing technologies and planning cases with established technologies. The planning of eco-efficient process chains is crucial for manufacturing companies. However, in the state-of-the-art planning, various barriers exist towards the integration of the environmental dimension. Against this background, a concept for the integration of classic lean and environmental criteria into the three planning phases of process chains is presented. During concept planning, the Technology Assessment Tool supports planners in the identification of eco-efficient technologies. During rough planning, the Value Stream Design Tool enables the derivation of a production line based on workpiece characteristics. For detailed planning, tools for eco-efficient machine and process chain configuration are provided. Three case studies from large-scale automotive component manufacturing with established and emerging technologies demonstrate the tool applicability.

Download or read book Resource Efficiency in Manufacturing Value Chains written by Stefan Alexander Blume and published by Springer Nature. This book was released on 2020-11-04 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a concept for fostering resource efficient manufacturing. The protection of our environment demands a more responsible use of natural resources, and a higher degree of transparency along manufacturing value chains will be required in order to make significant advances in this context. Industrial decision makers must be provided with adequate methods and tools to simultaneously and systematically pursue technical, economic and environmental targets. Building on established and complementary methods, such as material and energy flow analysis (MEFA), value stream mapping (VSM), life cycle costing (LCC) and environmental life cycle assessment (LCA), this book introduces a concept that allows a holistic modeling and multi-dimensional performance assessment of manufacturing systems on different levels – from processes up to entire value chains and product life cycles. It also demonstrates the application of the concept using two case studies from the metal mechanic industry.

Download or read book Integrated Computational Life Cycle Engineering for Traction Batteries written by Felipe Cerdas and published by Springer Nature. This book was released on 2021-08-30 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The environmental burden caused by private transportation represents a significant challenge towards sustainability. Electric vehicles are considered a key technology to reduce the environmental impact caused by the mobility sector. However, the global adoption of electromobility implies shift and diversification of the environmental impacts caused by the transportation sector mainly driven by the production of the battery system. Modeling the life cycle environmental impacts of traction batteries is a time demanding and interdisciplinary task as it involves a high variability and requires an in-depth knowledge of the product system under analysis. To face these challenges, an Integrated Computational Life Cycle Engineering ICLCE framework for EVs has been developed. The ICLCE framework described aims at supporting fast and comprehensive modelling of complex foreground systems in the electromobility field and their interaction with diverse backgrounds and partial contexts.

Download or read book Future Automotive Production Conference 2022 written by Klaus Dröder and published by Springer Nature. This book was released on 2023-03-18 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the conference “Future Automotive Production 2022”, which took place in Wolfsburg. The conference focused on hybrid lightweight design, which is characterized by the combination of different materials with the aim of improving properties and reducing weight. In particular, production technologies for hybrid lightweight design were discussed, new evaluation methods for the ecological assessment of hybrid components were presented and future-oriented approaches motivated by nature for the development of components, assemblies and systems were introduced. Lightweight design is a key technology for the development of sustainable and resource-efficient mobility concepts. Vehicle manufacturers operate in an area of conflict between customer requirements, competition and legislation. Material hybrid structures, which combine the advantages of different materials, have a high potential for reducing weight, while simultaneously expanding component functionality. The future, efficient use of function-integrated hybrid structures in vehicle design requires innovations and constant developments in vehicle and production technology. There is a great demand, especially with regard to new methods and technologies, for "affordable" lightweight construction in large-scale production, taking into account the increasing requirements with regard to variant diversity, safety and quality.

Download or read book Data Science Based Full Lifespan Management of Lithium Ion Battery written by Kailong Liu and published by Springer Nature. This book was released on 2022-04-08 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book comprehensively consolidates studies in the rapidly emerging field of battery management. The primary focus is to overview the new and emerging data science technologies for full-lifespan management of Li-ion batteries, which are categorized into three groups, namely (i) battery manufacturing management, (ii) battery operation management, and (iii) battery reutilization management. The key challenges, future trends as well as promising data-science technologies to further improve this research field are discussed. As battery full-lifespan (manufacturing, operation, and reutilization) management is a hot research topic in both energy and AI fields and none specific book has focused on systematically describing this particular from a data science perspective before, this book can attract the attention of academics, scientists, engineers, and practitioners. It is useful as a reference book for students and graduates working in related fields. Specifically, the audience could not only get the basics of battery manufacturing, operation, and reutilization but also the information of related data-science technologies. The step-by-step guidance, comprehensive introduction, and case studies to the topic make it accessible to audiences of different levels, from graduates to experienced engineers.

Download or read book Multiscale Modeling of Degradation in Lithium ion Batteries written by Fridolin Röder and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive methodology for multiscale simulation of degradation in lithium-ion batteries. The work helps to understand battery degradation processes by revealing complex multiscale effects, which cannot be taken into account by single-scale models. A novel numerical method is presented, which dynamically couples molecular models based on kinetic Monte Carlo method with macroscopic models. Moreover, the work provides mathematical models of degradation on various length scales, e.g. heterogeneous side reactions on molecular scale and the restructuring of particle size distributions on electrode scale. Instead of describing processes separately, the multiscale methodology systematically analyzes interaction of degradation processes and cell operation. The presented methodology is certainly applicable to other electrochemical systems with considerable multi-scale nature.

Download or read book Cascade Use in Technologies 2018 written by Alexandra Pehlken and published by Springer. This book was released on 2018-08-14 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference addresses general topics on how products and materials can be recycled and looks for application examples. The focus is on the areas: · Material and Energy Flow Assessment · Sustainable Mobility · Industrial Ecology with a focus on renewable energy sources or WEEE · (Re-) Manufacturing · Cascade Use and Waste Management 4.0

Download or read book Physical Multiscale Modeling and Numerical Simulation of Electrochemical Devices for Energy Conversion and Storage written by Alejandro A. Franco and published by Springer. This book was released on 2015-11-12 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to review innovative physical multiscale modeling methods which numerically simulate the structure and properties of electrochemical devices for energy storage and conversion. Written by world-class experts in the field, it revisits concepts, methodologies and approaches connecting ab initio with micro-, meso- and macro-scale modeling of components and cells. It also discusses the major scientific challenges of this field, such as that of lithium-ion batteries. This book demonstrates how fuel cells and batteries can be brought together to take advantage of well-established multi-scale physical modeling methodologies to advance research in this area. This book also highlights promising capabilities of such approaches for inexpensive virtual experimentation. In recent years, electrochemical systems such as polymer electrolyte membrane fuel cells, solid oxide fuel cells, water electrolyzers, lithium-ion batteries and supercapacitors have attracted much attention due to their potential for clean energy conversion and as storage devices. This has resulted in tremendous technological progress, such as the development of new electrolytes and new engineering designs of electrode structures. However, these technologies do not yet possess all the necessary characteristics, especially in terms of cost and durability, to compete within the most attractive markets. Physical multiscale modeling approaches bridge the gap between materials’ atomistic and structural properties and the macroscopic behavior of a device. They play a crucial role in optimizing the materials and operation in real-life conditions, thereby enabling enhanced cell performance and durability at a reduced cost. This book provides a valuable resource for researchers, engineers and students interested in physical modelling, numerical simulation, electrochemistry and theoretical chemistry.

Download or read book Multiscale Modelling and Simulation written by Sabine Attinger and published by Springer Science & Business Media. This book was released on 2004-07-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: In August 2003, ETHZ Computational Laboratory (CoLab), together with the Swiss Center for Scientific Computing in Manno and the Università della Svizzera Italiana (USI), organized the Summer School in "Multiscale Modelling and Simulation" in Lugano, Switzerland. This summer school brought together experts in different disciplines to exchange ideas on how to link methodologies on different scales. Relevant examples of practical interest include: structural analysis of materials, flow through porous media, turbulent transport in high Reynolds number flows, large-scale molecular dynamic simulations, ab-initio physics and chemistry, and a multitude of others. Though multiple scale models are not new, the topic has recently taken on a new sense of urgency. A number of hybrid approaches are now created in which ideas coming from distinct disciplines or modelling approaches are unified to produce new and computationally efficient techniques.

Download or read book Lithium Ion Batteries Basics and Applications written by Reiner Korthauer and published by Springer. This book was released on 2018-08-07 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook focuses on a complete outline of lithium-ion batteries. Just before starting with an exposition of the fundamentals of this system, the book gives a short explanation of the newest cell generation. The most important elements are described as negative / positive electrode materials, electrolytes, seals and separators. The battery disconnect unit and the battery management system are important parts of modern lithium-ion batteries. An economical, faultless and efficient battery production is a must today and is represented with one chapter in the handbook. Cross-cutting issues like electrical, chemical, functional safety are further topics. Last but not least standards and transportation themes are the final chapters of the handbook. The different topics of the handbook provide a good knowledge base not only for those working daily on electrochemical energy storage, but also to scientists, engineers and students concerned in modern battery systems.

Download or read book Advances in Battery Technologies for Electric Vehicles written by Bruno Scrosati and published by Woodhead Publishing. This book was released on 2015-05-25 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Battery Technologies for Electric Vehicles provides an in-depth look into the research being conducted on the development of more efficient batteries capable of long distance travel. The text contains an introductory section on the market for battery and hybrid electric vehicles, then thoroughly presents the latest on lithium-ion battery technology. Readers will find sections on battery pack design and management, a discussion of the infrastructure required for the creation of a battery powered transport network, and coverage of the issues involved with end-of-life management for these types of batteries. Provides an in-depth look into new research on the development of more efficient, long distance travel batteries Contains an introductory section on the market for battery and hybrid electric vehicles Discusses battery pack design and management and the issues involved with end-of-life management for these types of batteries

Download or read book Multi scale Modeling of Batteries and Supercapacitors written by Alejandro Franco and published by John Wiley & Sons. This book was released on 2021-12-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the topic of modeling and numerical simulation of electrochemical devices type batteries and supercapacitors through various theoretical approaches, each aiming a description of physico-chemical phenomena occurring at different temporal and spatial scales. The application of these methods to the analysis of experimental characterization and interpretation of redox and transport mechanisms occurring in current electrochemical devices is illustrated with concrete examples in each Section. Special attention is given to the application of some of these approaches to the simulation of manufacturing composite electrodes and the technical multiscale modeling which allow, as their name suggests, to take into account within the same formalism of events occurring at different scales. These emerging methods aim to translate the microscopic properties of the various elements used in electrochemical devices at the macroscopic behavior of the whole cell in operating conditions. All the available methods and methodological bolts remaining to be exercised are also discussed.

Download or read book The Multi Agent Transport Simulation MATSim written by Andreas Horni and published by Ubiquity Press. This book was released on 2016-08-10 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MATSim (Multi-Agent Transport Simulation) software project was started around 2006 with the goal of generating traffic and congestion patterns by following individual synthetic travelers through their daily or weekly activity programme. It has since then evolved from a collection of stand-alone C++ programs to an integrated Java-based framework which is publicly hosted, open-source available, automatically regression tested. It is currently used by about 40 groups throughout the world. This book takes stock of the current status. The first part of the book gives an introduction to the most important concepts, with the intention of enabling a potential user to set up and run basic simulations. The second part of the book describes how the basic functionality can be extended, for example by adding schedule-based public transit, electric or autonomous cars, paratransit, or within-day replanning. For each extension, the text provides pointers to the additional documentation and to the code base. It is also discussed how people with appropriate Java programming skills can write their own extensions, and plug them into the MATSim core. The project has started from the basic idea that traffic is a consequence of human behavior, and thus humans and their behavior should be the starting point of all modelling, and with the intuition that when simulations with 100 million particles are possible in computational physics, then behavior-oriented simulations with 10 million travelers should be possible in travel behavior research. The initial implementations thus combined concepts from computational physics and complex adaptive systems with concepts from travel behavior research. The third part of the book looks at theoretical concepts that are able to describe important aspects of the simulation system; for example, under certain conditions the code becomes a Monte Carlo engine sampling from a discrete choice model. Another important aspect is the interpretation of the MATSim score as utility in the microeconomic sense, opening up a connection to benefit cost analysis. Finally, the book collects use cases as they have been undertaken with MATSim. All current users of MATSim were invited to submit their work, and many followed with sometimes crisp and short and sometimes longer contributions, always with pointers to additional references. We hope that the book will become an invitation to explore, to build and to extend agent-based modeling of travel behavior from the stable and well tested core of MATSim documented here.