Download or read book Multiscale Mechanics of Graphene Oxide and Graphene Based Composite Films written by Changhong Cao and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical behavior of graphene oxide is length scale dependent: orders of magnitude different between the bulk forms and monolayer counterparts. Understanding the underlying mechanisms plays a significant role in their versatile application. A systematic multiscale mechanical study from monolayer to multilayer, including the interactions between layers of GO, can provide fundamental support for material engineering. In this thesis, an experimental coupled with simulation approach was used to study the multiscale mechanics of graphene oxide (GO) and the methods developed for GO study are proved to be applicable also to mechanical study of graphene based composites. GO is a layered nanomaterial comprised of hierarchical units whose characteristic dimension lies between monolayer GO (0.7 nm â 1.2 nm) and bulk GO papers (1 um). Mechanical behaviors of monolayer GO and GO nanosheets (10 nm- 100 nm) were comprehensively studied this work. Monolayer GO was measured to have an average strength of 24.7 GPa,, orders of magnitude higher than previously reported values for GO paper and approximately 50% of the 2D intrinsic strength of pristine graphene. The huge discrepancy between the strength of monolayer GO and that of bulk GO paper motivated the study of GO at the intermediate length scale (GO nanosheets). Experimental results showed that GO nanosheets possess high strength in the gigapascal range. Molecular Dynamic simulations showed that the transition in the failure behavior from interplanar fracture to intraplanar fracture was responsible for the huge strength discrepancy between nanometer scale GO and bulk GO papers. Additionally, the interfacial shear strength between GO layers was found to be a key contributing factor to the distinct mechanical behavior among hierarchical units of GO. The understanding of the multiscale mechanics of GO is transferrable in heterogeneous layered nanomaterials, such as graphene-metal oxide based anode materials in Li-ion batteries. The novel methods developed in this work to study GO multilayered structures were also applied to study the mechanics of graphene-TiO2 composites. It was found that a critical thickness range of TiO2 deposition on graphene is required for the observed stiffness enhancement effect of graphene to influence the mechanical behavior of the composite.
Download or read book Graphene in Composite Materials written by Nikhil A. Koratkar and published by DEStech Publications, Inc. This book was released on 2013 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: A monograph that locates graphene within the carbon chemistry alternatives available to materials engineers and explains how it is incorporated into polymer-matrix, as well as ceramic - and metal-matrix composite materials. It also investigates emerging uses of graphene in films, coatings and colloidal suspensions.
Download or read book Handbook of Graphene Volume 4 written by Cengiz Ozkan and published by John Wiley & Sons. This book was released on 2019-06-28 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth volume in a series of handbooks on graphene research and applications The Handbook of Graphene, Volume 4: Composites looks at composite materials exclusively. Topics covered include graphene composites and graphene-reinforced advanced composite materials. The following graphene-based subjects are discussed: ceramic composites; composite nanostructures; composites with shape memory effect; and scroll structures. Chapters also address: the fabrication and properties of copper graphene composites; graphene metal oxide composite as an anode material in li-ion batteries; supramolecular graphene-based systems for drug delivery; and other graphene-related areas of interest to scientists and researchers.
Download or read book Multiscale Mechanics of Carbon Nanotubes and Graphene written by Xu Huang and published by . This book was released on 2012 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICCS20 20th International Conference on Composite Structures written by Nicholas Fantuzzi and published by Società Editrice Esculapio. This book was released on 2017-07-24 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have aroused a great interest over the last few decades, as proven by the huge number of scientific papers and industrial progress. The increase in the use of composite structures in different engineering practices justify the present international meeting where researches from every part of the globe can share and discuss the recent advancements regarding the use of structural components within advanced applications such as buckling, vibrations, repair, reinforcements, concrete, composite laminated materials and more recent metamaterials. Studies about composite structures are truly multidisciplinary and the given contributions can help other researches and professional engineers in their own field. This Conference is suitable as a reference for engineers and scientists working in the professional field, in the industry and the academia and it gives the possibility to share recent advancements in different engineering practices to the outside world. This book aims to collect selected plenary and key-note lectures of this International Conference. For this reason, the establishment of this 20th edition of International Conference on Composite Structures has appeared appropriate to continue what has been begun during the previous editions. ICCS wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures, sandwich panels, nanotechnology, bio-composites, delamination and fracture, experimental methods, manufacturing and other countless topics that have filled many sessions during this conference. As a proof of this event, which has taken place in Paris (France), selected plenary and key-note lectures have been collected in the present book.
Download or read book Graphene Science Handbook written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the Practical Applications and Promising Developments of GrapheneThe Graphene Science Handbook is a six-volume set that describes graphene's special structural, electrical, and chemical properties. The book considers how these properties can be used in different applications (including the development of batteries, fuel cells, photovoltaic
Download or read book Graphene Science Handbook Six Volume Set written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-26 with total page 3379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is the strongest material ever studied and can be an efficient substitute for silicon. This six-volume handbook focuses on fabrication methods, nanostructure and atomic arrangement, electrical and optical properties, mechanical and chemical properties, size-dependent properties, and applications and industrialization. There is no other major reference work of this scope on the topic of graphene, which is one of the most researched materials of the twenty-first century. The set includes contributions from top researchers in the field and a foreword written by two Nobel laureates in physics. Volumes in the set: K20503 Graphene Science Handbook: Mechanical and Chemical Properties (ISBN: 9781466591233) K20505 Graphene Science Handbook: Fabrication Methods (ISBN: 9781466591271) K20507 Graphene Science Handbook: Electrical and Optical Properties (ISBN: 9781466591318) K20508 Graphene Science Handbook: Applications and Industrialization (ISBN: 9781466591332) K20509 Graphene Science Handbook: Size-Dependent Properties (ISBN: 9781466591356) K20510 Graphene Science Handbook: Nanostructure and Atomic Arrangement (ISBN: 9781466591370)
Download or read book Graphene written by Mujtaba Ikram and published by BoD – Books on Demand. This book was released on 2023-02-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is considered as a miracle material for scientists and engineers owing to its outstanding physical properties. Graphene and its nanocomposites are promising multifunctional materials with improved tensile strength and elastic modulus. graphene nanocomposites may have a wide range of potential applications due to their outstanding properties and the low cost of graphene. Because graphene composites have a controllable porous structure, a large surface area, high conductivity, high-temperature stability, excellent anti-corrosion properties, and composite compatibility, they can be used in energy storage as electrocatalysts, electro-conductive additives, intercalation hosts, and an ideal substrate for active materials. Shortly, graphene will be a base for the next generation’s scientific revolution.
Download or read book Handbook of Graphene written by Sulaiman Wadi Harun and published by John Wiley & Sons. This book was released on 2019-06-12 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The eighth volume in a series of handbooks on graphene research and applications The Handbook of Graphene, Volume 8: Technology and Innovations discusses the role of graphene-based applications in technological advancements. Topics include graphene materials used in circuit board repairs; RFID antenna and sensor fabrication; and wearable healthcare electronics. Chapters present detailed information on: modeling methods used in graphene research; applications of graphene-on-silicon photonic integrated circuits; the development of graphene for engineering applications; and other graphene subjects of interest to scientists, chemists and physicists.
Download or read book Graphene Based Polymer Nanocomposites written by Andriy Nadtochiy and published by Springer Nature. This book was released on with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bionanocomposites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2020-06-21 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bionanocomposites: Green Synthesis and Applications provides an in-depth study on the synthesis of a variety of bionanocomposites from different types of raw materials. In addition, the book offers an overview on the synthesis and applications of environmentally friendly bionanocomposites, with an emphasis on bionanocomposites of natural products. Final sections focus on various characterization techniques, their production, and the future prospects of sustainable bionanocomposites. Outlines the major characterization methods and processing techniques for bionanocomposites Explores how bionanocomopsites are being used to design new projects in medicine and environmental engineering Discusses how the properties of a variety of bionanocomposite classes make them suitable for particular industrial applications
Download or read book Innovations in Graphene Based Polymer Composites written by Sanjay Mavinkere Rangappa and published by Elsevier. This book was released on 2022-06-17 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Graphene-Based Polymer Composites reviews recent developments in this important field of research. The book's chapters focus on processing methods, functionalization, mechanical, electrical and thermal properties, applications and life cycle assessment. Leading researchers from industry, academia and government research institutions from across the globe have contributed to the book, making it a valuable reference resource for materials scientists, academic researchers and industrial engineers working on recent developments in the area of graphene-based materials, graphene-based polymer blends and composites. Readers will gain insights into what has been explored to-date, along with associated benefits and challenges for the future. Presents a strong emphasis on synthesis methods, functionalization, processing and properties Includes chapters on characterization, electrical conductivity and modeling and simulation Provides recent advances in applications, including drawbacks and future scope
Download or read book ECCM Research Topic on Advanced Manufacturing of Composites written by Veronique Michaud and published by Frontiers Media SA. This book was released on 2023-10-25 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanocomposites written by Jinbo Bai and published by John Wiley & Sons. This book was released on 2022-07-20 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites are one of the major advances in the field of materials. They have applications in sectors as varied as aeronautics, energy and the environment. However, the effective use of nanocomposites requires new knowledge and tools in order to overcome the difficulties and benefit from the advantages. Nanocomposites presents recent academic and industrial progress in this field, as well as the latest research on the effective use of nanoscale fillers and reinforcements to improve the performance of advanced nanocomposites. It also describes the techniques and tools used to prepare nanocomposites, including the latest techniques for synthesis and surface treatment of nanofillers for different applications. Finally, it details the role of nanoscience in the design, characterization and multi-scale modeling of these materials, with a focus on nanoscale phenomena.
Download or read book Nanomechanics of Structures and Materials written by Krzysztof Kamil Żur and published by Elsevier. This book was released on 2024-08-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomechanics of Structures and Materials highlights and compares the advantages and disadvantages of diverse modeling and analysis techniques across a wide spectrum of different nanostructures and nanomaterials. It focuses on the behavior of media with nanostructural features where the classic continuum theory ceases to hold and augmented continuum theories such as nonlocal theory, gradient theory of elasticity, and the surface elasticity model should be adopted. These generalized frameworks, tailored to address the intricate characteristics inherent at the nanoscale level, are discussed in depth, and their application to a variety of different materials and structures, including graphene, shells, arches, nanobeams, carbon nanotubes, porous materials, and more, is covered. Key Features Outlines the advantages and limitations of size-dependent continuum theories and modeling techniques when studying fundamental problems in the nanomechanics of structures and materials Discusses various analytical and numerical tools for identifying nanomechanical defects in structures Explores a diverse array of structures and materials, including graphene, shells, arches, nanobeams, carbon nanotubes, and porous materials
Download or read book Fundamentals of Multiscale Modeling of Structural Materials written by Wenjie Xia and published by Elsevier. This book was released on 2022-11-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Multiscale Modeling of Structural Materials provides a robust introduction to the computational tools, underlying theory, practical applications, and governing physical phenomena necessary to simulate and understand a wide-range of structural materials at multiple time and length scales. The book offers practical guidelines for modeling common structural materials with well-established techniques, outlining detailed modeling approaches for calculating and analyzing mechanical, thermal and transport properties of various structural materials such as metals, cement/concrete, polymers, composites, wood, thin films, and more.Computational approaches based on artificial intelligence and machine learning methods as complementary tools to the physics-based multiscale techniques are discussed as are modeling techniques for additively manufactured structural materials. Special attention is paid to how these methods can be used to develop the next generation of sustainable, resilient and environmentally-friendly structural materials, with a specific emphasis on bridging the atomistic and continuum modeling scales for these materials. Synthesizes the latest cutting-edge computational multiscale modeling techniques for an array of structural materials Emphasizes the foundations of the field and offers practical guidelines for modeling material systems with well-established techniques Covers methods for calculating and analyzing mechanical, thermal and transport properties of various structural materials such as metals, cement/concrete, polymers, composites, wood, and more Highlights underlying theory, emerging areas, future directions and various applications of the modeling methods covered Discusses the integration of multiscale modeling and artificial intelligence
Download or read book Lightweight Polymer Composite Structures written by Sanjay Mavinkere Rangappa and published by CRC Press. This book was released on 2020-09-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive account of developments in the area of lightweight polymer composites. It encompasses design and manufacturing methods for the lightweight polymer structures, various techniques, and a broad spectrum of applications. The book highlights fundamental research in lightweight polymer structures and integrates various aspects from synthesis to applications of these materials. Features Serves as a one stop reference with contributions from leading researchers from industry, academy, government, and private research institutions across the globe Explores all important aspects of lightweight polymer composite structures Offers an update of concepts, advancements, challenges, and application of lightweight structures Current status, trends, future directions, and opportunities are discussed, making it friendly for both new and experienced researchers.
