Download or read book Multiphysical Modelling of Regular and Irregular Combustion in Spark Ignition Engines Using an Integrated Interactive Flamelet Approach written by Linda Maria Beck and published by Logos Verlag Berlin. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The virtual development of future Spark Ignition (SI) engine combustion processes in three-dimensional Computational Fluid Dynamics (3D-CFD) demands for the integration of detailed chemistry, enabling - additionally to the 3D-CFD modelling of flow and mixture formation - the prediction of fuel-dependent SI engine combustion in all of its complexity. This work presents an approach, which constitutes a coupled solution for flame propagation, auto-ignition, and emission formation modelling incorporating detailed chemistry, while exhibiting low computational costs. For modelling the regular flame propagation, a laminar flamelet approach, the G-equation is used. Auto-ignition phenomena are addressed using an integrated flamelet approach, which bases on the tabulation of fuel-dependent reaction kinetics. By introducing a progress variable for the auto-ignition - the Ignition Progress Variable (IPV) - detailed chemistry is integrated in 3D-CFD. The modelling of emission formation bases on an interactively coupled flamelet approach, the Transient Interactive Flamelet (TIF) model. The functionality of the combined approach to model the variety of SI engine combustion phenomena is proved first in terms of fundamentals and standalone sub-model functionality studies by introducing a simplified test case, which represents an adiabatic pressure vessel without moving meshes. Following the basic functionality studies, the sub-model functionalities are investigated and validated in adequate engine test cases. It is shown, that the approach allows to detect locally occurring auto-ignition phenomena in the combustion chamber, and to model their interaction with regular flame propagation. Moreover, the approach enables the prediction of emission formation on cell level.
Download or read book Computational Fluid Dynamics in Fire Engineering written by Guan Heng Yeoh and published by Butterworth-Heinemann. This book was released on 2009-04-20 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire and combustion presents a significant engineering challenge to mechanical, civil and dedicated fire engineers, as well as specialists in the process and chemical, safety, buildings and structural fields. We are reminded of the tragic outcomes of 'untenable' fire disasters such as at King's Cross underground station or Switzerland's St Gotthard tunnel. In these and many other cases, computational fluid dynamics (CFD) is at the forefront of active research into unravelling the probable causes of fires and helping to design structures and systems to ensure that they are less likely in the future. Computational fluid dynamics (CFD) is routinely used as an analysis tool in fire and combustion engineering as it possesses the ability to handle the complex geometries and characteristics of combustion and fire. This book shows engineering students and professionals how to understand and use this powerful tool in the study of combustion processes, and in the engineering of safer or more fire resistant (or conversely, more fire-efficient) structures.No other book is dedicated to computer-based fire dynamics tools and systems. It is supported by a rigorous pedagogy, including worked examples to illustrate the capabilities of different models, an introduction to the essential aspects of fire physics, examination and self-test exercises, fully worked solutions and a suite of accompanying software for use in industry standard modeling systems. - Computational Fluid Dynamics (CFD) is widely used in engineering analysis; this is the only book dedicated to CFD modeling analysis in fire and combustion engineering - Strong pedagogic features mean this book can be used as a text for graduate level mechanical, civil, structural and fire engineering courses, while its coverage of the latest techniques and industry standard software make it an important reference for researchers and professional engineers in the mechanical and structural sectors, and by fire engineers, safety consultants and regulators - Strong author team (CUHK is a recognized centre of excellence in fire eng) deliver an expert package for students and professionals, showing both theory and applications. Accompanied by CFD modeling code and ready to use simulations to run in industry-standard ANSYS-CFX and Fluent software
Download or read book Emerging Trends in Mechanical Engineering written by L. Vijayaraghavan and published by Springer Nature. This book was released on 2019-12-11 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Emerging Trends in Mechanical Engineering (ICETME 2018). The book covers various topics of mechanical engineering like computational fluid dynamics, heat transfer, machine dynamics, tribology, and composite materials. In addition, relevant studies in the allied fields of manufacturing, industrial and production engineering are also covered. The applications of latest tools and techniques in the context of mechanical engineering problems are discussed in this book. The contents of this book will be useful for students, researchers as well as industry professionals.
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics.Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: - The automatic solution of mathematical models - Effective numerical schemes for fluid flows - The development of an effective mesh-free numerical solution method - The development of numerical procedures for multiphysics problems - The development of numerical procedures for multiscale problems - The modelling of uncertainties - The analysis of complete life cycles of systems - Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features - Bridges the gap between academic researchers and practitioners in industry - Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda - Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Download or read book Ground and Flight Evaluation of a Small Scale Inflatable Winged Aircraft written by and published by . This book was released on 2002 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A small-scale, instrumented research aircraft was flown to investigate the flight characteristics of inflatable wings. Ground tests measured the static structural characteristics of the wing at different inflation pressures, and these results compared favorably with analytical predictions. A research-quality instrumentation system was assembled, largely from commercial off-the-shelf components, and installed in the aircraft. Initial flight operations were conducted with a conventional rigid wing having the same dimensions as the inflatable wing. Subsequent flights were conducted with the inflatable wing. Research maneuvers were executed to identify the trim, aerodynamic performance, and longitudinal stability and control characteristics of the vehicle in its different wing configurations. For the angle-of-attack range spanned in this flight program.
Download or read book The Consumption of Mass written by Nicholas Lee and published by Wiley-Blackwell. This book was released on 2001-10-08 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arguing that mass is key to understanding the materialisation of social relations, this collection opens up contemporary thinking about identity, choice and values. With new contributions by Zygmunt Bauman, Robert Cooper and Dan Rose, these twelve innovative papers draw together debates on social theory, community, materiality and consumption.
Download or read book ARL TR written by Aerospace Research Laboratories (U.S.) and published by . This book was released on 1973 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Gallery of Fluid Motion written by M. Samimy and published by Cambridge University Press. This book was released on 2004-01-12 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The visualization of fluid flow has played a major role in the development of fluid dynamics and its applications, from the evolution of flight to tracking weather, and understanding the flow of blood. The Fluid Dynamics Division of the American Physical Society sponsors an annual competition for outstanding images of fluid flow. This volume includes a selection of winners from 1985 to the present. Each image is accompanied by some explanatory text, making the volume an important acquisition for anyone involved in fluid flow research.
Download or read book Advanced Energy Storage Technologies and Their Applications AESA written by Rui Xiong and published by MDPI. This book was released on 2018-02-21 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advanced Energy Storage Technologies and Their Applications (AESA)" that was published in Energies
Download or read book Explosion Hazards in the Process Industries written by Rolf K. Eckhoff and published by Gulf Professional Publishing. This book was released on 2016-06-14 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards in the Process Industries, Second Edition, delivers the most current and comprehensive content for today's process engineer. Process safety and petrochemical engineers inherently accept that there is a risk of explosions when working on process facilities such as plants and refineries. Yet many that enter this field do not have a fundamental starting point to understand the nature of explosions, and there are a lot of misconceptions and impartial information in the market. Explosion Hazards in the Process Industries, Second Edition, answers this need by providing engineers and consultants a go-to reference and training guide to understand the principles of explosions, what causes them, and how to mitigate and prevent them from reoccurring. Enhanced to include new chapters on BLEVE (Boiling Liquid Expanding Vapor Explosions), water vapor explosions, and destructive effects from accidental explosions, this guide continues to fulfill a comprehensive introduction to the subject, rounded out with new case studies, references, and a discussion on methods of hazard and risk analysis. - Eckoff, Dust Explosions in the Process Industries, 3rd Edition, 9780750676021, Jun 2003, $240.00 - Amyotte, An Introduction to Dust Explosions, 9780123970077, Jun 2013, $49.95 - Barton, Dust Explosion Prevention and Protection, 9780750675192, Mar 2002, $155.00 - Nolan, Handbook of Fire and Explosion Protection Engineering Handbook Principles, 3rd, 9780323313018, May 2014, $160.00
Download or read book Aircraft Design for Reduced Climate Impact written by Emily Dallara and published by Stanford University. This book was released on 2011 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft affect global climate through emissions of greenhouse gases and their precursors and by altering cirrus cloudiness. Changes in operations and design of future aircraft may be necessary to meet goals for limiting climate change. One method for reducing climate impacts involves designing aircraft to fly at altitudes where the impacts of NOx emissions are less severe and persistent contrail formation is less likely. By considering these altitude effects and additionally applying climate mitigation technologies, impacts can be reduced by 45-70% with simultaneous savings in total operating costs. Uncertainty is assessed, demonstrating that relative climate impact savings can be expected despite large scientific uncertainties. Strategies for improving climate performance of existing aircraft are also explored, revealing potential climate impact savings of 20-40%, traded for a 2% increase in total operating costs and reduced maximum range.
Download or read book Turbulent Reactive Flows written by R. Borghi and published by Springer. This book was released on 2012-10-20 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent reactive flows are of common occurrance in combustion engineering, chemical reactor technology and various types of engines producing power and thrust utilizing chemical and nuclear fuels. Pollutant formation and dispersion in the atmospheric environment and in rivers, lakes and ocean also involve interactions between turbulence, chemical reactivity and heat and mass transfer processes. Considerable advances have occurred over the past twenty years in the understanding, analysis, measurement, prediction and control of turbulent reactive flows. Two main contributors to such advances are improvements in instrumentation and spectacular growth in computation: hardware, sciences and skills and data processing software, each leading to developments in others. Turbulence presents several features that are situation-specific. Both for that reason and a number of others, it is yet difficult to visualize a so-called solution of the turbulence problem or even a generalized approach to the problem. It appears that recognition of patterns and structures in turbulent flow and their study based on considerations of stability, interactions, chaos and fractal character may be opening up an avenue of research that may be leading to a generalized approach to classification and analysis and, possibly, prediction of specific processes in the flowfield. Predictions for engineering use, on the other hand, can be foreseen for sometime to come to depend upon modeling of selected features of turbulence at various levels of sophistication dictated by perceived need and available capability.
Download or read book Chemically Reacting Flow written by Robert J. Kee and published by John Wiley & Sons. This book was released on 2017-09-27 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the theoretical underpinnings and practical applications of chemically reacting flow Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition combines fundamental concepts in fluid mechanics and physical chemistry while helping students and professionals to develop the analytical and simulation skills needed to solve real-world engineering problems. The authors clearly explain the theoretical and computational building blocks enabling readers to extend the approaches described to related or entirely new applications. New to this Second Edition are substantially revised and reorganized coverage of topics treated in the first edition. New material in the book includes two important areas of active research: reactive porous-media flows and electrochemical kinetics. These topics create bridges between traditional fluid-flow simulation approaches and transport within porous-media electrochemical systems. The first half of the book is devoted to multicomponent fluid-mechanical fundamentals. In the second half the authors provide the necessary fundamental background needed to couple reaction chemistry into complex reacting-flow models. Coverage of such topics is presented in self-contained chapters, allowing a great deal of flexibility in course curriculum design. • Features new chapters on reactive porous-media flow, electrochemistry, chemical thermodynamics, transport properties, and solving differential equations in MATLAB • Provides the theoretical underpinnings and practical applications of chemically reacting flow • Emphasizes fundamentals, allowing the analyst to understand fundamental theory underlying reacting-flow simulations • Helps readers to acquire greater facility in the derivation and solution of conservation equations in new or unusual circumstances • Reorganized to facilitate use as a class text and now including a solutions manual for academic adopters Computer simulation of reactive systems is highly efficient and cost-effective in the development, enhancement, and optimization of chemical processes. Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition helps prepare graduate students in mechanical or chemical engineering, as well as research professionals in those fields take utmost advantage of that powerful capability.
Download or read book Dimensional Psychopathology written by Massimo Biondi and published by Springer. This book was released on 2018-05-30 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an innovative approach to clinical assessment in psychiatry based on a number of psychopathological dimensions with a presumed underlying pathophysiology, that are related to fundamental phenomenological aspects and lie on a continuum from normality to pathology. It is described how the evaluation of these dimensions with a specific, validated rapid assessment instrument could easily integrate and enrich the classical diagnostic DSM-5 or ICD-10 assessment. The supplemental use of this dimensional approach can better capture the complexity underlying current categories of mental illness. The findings from a large patient sample suggest how this assessment could give a first glance at how variable and multifaceted the psychopathological components within a single diagnostic category can be, and thereby optimise diagnosis and treatment choices. Being short and easy to complete, this dimensional assessment can be done in a busy clinical setting, during an ordinary psychiatric visit, and in an acute clinical context, with limited effort by a minimally trained clinician. Therefore, it provides interesting and useful information without additional costs, and allows research work to be performed even in difficult settings.
Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties.Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications.With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. - Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties - Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying - Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft
Download or read book Tunnel Fire Testing and Modeling written by Fabio Borghetti and published by Springer. This book was released on 2016-11-25 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to cast light on all aspects of tunnel fires, based on experimental activities and theoretical and computational fluid dynamics (CFD) analyses. In particular, the authors describe a transient full-scale fire test (~15 MW), explaining how they designed and performed the experimental activity inside the Morgex North tunnel in Italy. The entire organization of the experiment is described, from preliminary evaluations to the solutions found for management of operational difficulties and safety issues. This fire test allowed the collection of different measurements (temperature, air velocity, smoke composition, pollutant species) useful for validating and improving CFD codes and for testing the real behavior of the tunnel and its safety systems during a diesel oil fire with a significant heat release rate. Finally, the fire dynamics are compared with empirical correlations, CFD simulations, and literature measurements obtained in other similar tunnel fire tests. This book will be of interest to all engineers and public officials who are concerned with the nature, prevention, and management of tunnel fires.
