Download or read book Multiphase Flow and Heat Transfer in Materials Processing written by Clayton T. Crowe and published by . This book was released on 1994 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Multiphase Materials Processes written by Manabu Iguchi and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling Multiphase Materials Processes: Gas-Liquid Systems describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of fluid, high temperature, coupled heat and mass transfer, chemical reactions in some cases, and poor wettability of the reactor walls. Also discussed are: solutions based on experimental and numerical modeling of bubbling jet systems, recent advances in the modeling of nanoscale multi-phase phenomena and multiphase flows in micro-scale and nano-scale channels and reactors. Modeling Multiphase Materials Processes: Gas-Liquid Systems will prove a valuable reference for researchers and engineers working in mathematical modeling and materials processing.
Download or read book Basic Transport Phenomena in Materials Engineering written by Manabu Iguchi and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic theory and experimental techniques of transport phenomena in materials processing operations. Such fundamental knowledge is highly useful for researchers and engineers in the field to improve the efficiency of conventional processes or develop novel technology. Divided into four parts, the book comprises 11 chapters describing the principles of momentum transfer, heat transfer, and mass transfer in single phase and multiphase systems. Each chapter includes examples with solutions and exercises to facilitate students’ learning. Diagnostic problems are also provided at the end of each part to assess students’ comprehension of the material. The book is aimed primarily at students in materials science and engineering. However, it can also serve as a useful reference text in chemical engineering as well as an introductory transport phenomena text in mechanical engineering. In addition, researchers and engineers engaged in materials processing operations will find the material useful for the design of experiments and mathematical models in transport phenomena. This volume contains unique features not usually found in traditional transport phenomena texts. It integrates experimental techniques and theory, both of which are required to adequately solve the inherently complex problems in materials processing operations. It takes a holistic approach by considering both single and multiphase systems, augmented with specific practical examples. There is a discussion of flow and heat transfer in microscale systems, which is relevant to the design of modern processes such as fuel cells and compact heat exchangers. Also described are auxiliary relationships including turbulence modeling, interfacial phenomena, rheology, and particulate systems, which are critical to many materials processing operations.
Download or read book Multiphase Flow And Heat Transfer written by Xuejun Chen and published by CRC Press. This book was released on 1990-11-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: These essays present the latest international research results in the field of multiphase flow and heat transfer. They are based on papers presented at the "Second International Symposium on Multiphase Flow and Heat Transfer" conducted in China in 1989.
Download or read book Fundamentals of Multiphase Heat Transfer and Flow written by Amir Faghri and published by Springer Nature. This book was released on 2019-09-13 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a modern treatment of fundamentals of heat and mass transfer in the context of all types of multiphase flows with possibility of phase-changes among solid, liquid and vapor. It serves equally as a textbook for undergraduate senior and graduate students in a wide variety of engineering disciplines including mechanical engineering, chemical engineering, material science and engineering, nuclear engineering, biomedical engineering, and environmental engineering. Multiphase Heat Transfer and Flow can also be used to teach contemporary and novel applications of heat and mass transfer. Concepts are reinforced with numerous examples and end-of-chapter problems. A solutions manual and PowerPoint presentation are available to instructors. While the book is designed for students, it is also very useful for practicing engineers working in technical areas related to both macro- and micro-scale systems that emphasize multiphase, multicomponent, and non-conventional geometries with coupled heat and mass transfer and phase change, with the possibility of full numerical simulation.
Download or read book Multiphase Flow Dynamics 5 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2011-10-18 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present Volume 5 of the successful book package "Multiphase Flow Dynamics" is devoted to nuclear thermal hydraulics which is a substantial part of nuclear reactor safety. It provides knowledge and mathematical tools for adequate description of the process of transferring the fission heat released in materials due to nuclear reactions into its environment. It step by step introduces into the heat release inside the fuel, temperature fields in the fuels, the "simple" boiling flow in a pipe described using ideas of different complexity like equilibrium, non equilibrium, homogeneity, non homogeneity. Then the "simple" three-fluid boiling flow in a pipe is described by gradually involving the mechanisms like entrainment and deposition, dynamic fragmentation, collisions, coalescence, turbulence. All heat transfer mechanisms are introduced gradually discussing their uncertainty. Different techniques are introduced like boundary layer treatments or integral methods. Comparisons with experimental data at each step demonstrate the success of the different ideas and models. After an introduction of the design of the reactor pressure vessels for pressurized and boiling water reactors the accuracy of the modern methods is demonstrated using large number of experimental data sets for steady and transient flows in heated bundles. Starting with single pipe boiling going through boiling in the rod bundles the analysis of complete vessel including the reactor is finally demonstrated. Then a powerful method for nonlinear stability analysis of flow boiling and condensation is introduced. Models are presented and their accuracies are investigated for describing critical multiphase flow at different level of complexity. Basics of designing of steam generators, moisture separators and emergency condensers are presented. Methods for analyzing a complex pipe network flows with components like pumps, valves etc. are also presented. Methods for analysis of important aspects of the severe accidents like melt-water interactions, external cooling and cooling of layers of molten nuclear reactor material are presented. Valuable sets of thermo-physical and transport properties for severe accident analysis are presented for the following materials: uranium dioxide, zirconium dioxide, stainless steel, zirconium, aluminum, aluminum oxide, silicon dioxide, iron oxide, molybdenum, boron oxide, reactor corium, sodium, lead, bismuth, and lead-bismuth eutectic alloy. The emphasis is on the complete and consistent thermo dynamical sets of analytical approximations appropriate for computational analysis. Therefore the book presents a complete coverage of the modern Nuclear Thermal Hydrodynamics. This present second edition includes various updates, extensions, improvements and corrections. This present second edition includes various updates, extensions, improvements and corrections.
Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2012-04-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"
Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2010-04-21 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"
Download or read book Proceedings of the 1987 ASME JSME Thermal Engineering Joint Conference written by Thermal Engineering Joint Conference. 2, 1987, Honolulu, Hawaii and published by . This book was released on 1987 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Multiphase Flow and Heat Transfer written by Lixin Cheng and published by Bentham Science Publishers. This book was released on 2012 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"
Download or read book Transport Phenomena in Multiphase Systems written by Amir Faghri and published by Academic Press. This book was released on 2006 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering students in a wide variety of engineering disciplines from mechanical and chemical to biomedical and materials engineering must master the principles of transport phenomena as an essential tool in analyzing and designing any system or systems wherein momentum, heat and mass are transferred. This textbook was developed to address that need, with a clear presentation of the fundamentals, ample problem sets to reinforce that knowledge, and tangible examples of how this knowledge is put to use in engineering design. Professional engineers, too, will find this book invaluable as reference for everything from heat exchanger design to chemical processing system design and more. * Develops an understanding of the thermal and physical behavior of multiphase systems with phase change, including microscale and porosity, for practical applications in heat transfer, bioengineering, materials science, nuclear engineering, environmental engineering, process engineering, biotechnology and nanotechnology * Brings all three forms of phase change, i.e., liquid vapor, solid liquid and solid vapor, into one volume and describes them from one perspective in the context of fundamental treatment * Presents the generalized integral and differential transport phenomena equations for multi-component multiphase systems in local instance as well as averaging formulations. The molecular approach is also discussed with the connection between microscopic and molecular approaches * Presents basic principles of analyzing transport phenomena in multiphase systems with emphasis on melting, solidification, sublimation, vapor deposition, condensation, evaporation, boiling and two-phase flow heat transfer at the micro and macro levels * Solid/liquid/vapor interfacial phenomena, including the concepts of surface tension, wetting phenomena, disjoining pressure, contact angle, thin films and capillary phenomena, including interfacial balances for mass, species, momentum, and energy for multi-component and multiphase interfaces are discussed * Ample examples and end-of-chapter problems, with Solutions Manual and PowerPoint presentation available to the instructors
Download or read book Flow boiling and condensation in microscale channels written by Fabio Toshio Kanizawa and published by Springer Nature. This book was released on 2021-04-30 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers aspects of multiphase flow and heat transfer during phase change processes, focusing on boiling and condensation in microscale channels. The authors present up-to-date predictive methods for flow pattern, void fraction, pressure drop, heat transfer coefficient and critical heat flux, pointing out the range of operational conditions that each method is valid. The first four chapters are dedicated on the motivation to study multiphase flow and heat transfer during phase change process, and the three last chapters are focused on the analysis of heat transfer process during boiling and condensation. During the description of the models and predictive methods, the trends are discussed and compared with experimental findings.
Download or read book Fluid Flow Heat Transfer and Boiling in Micro Channels written by L. P. Yarin and published by Springer Science & Business Media. This book was released on 2008-09-19 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of the book is uid dynamics and heat transfer in micro-channels. This problem is important for understanding the complex phenomena associated with single- and two-phase ows in heated micro-channels. The challenge posed by high heat uxes in electronic chips makes thermal management a key factor in the development of these systems. Cooling of mic- electronic components by new cooling technologies, as well as improvement of the existing ones, is becoming a necessity as the power dissipation levels of integrated circuits increases and their sizes decrease. Miniature heat sinks with liquid ows in silicon wafers could signi cantly improve the performance and reliability of se- conductor devices. The improvements are made by increasing the effective thermal conductivity, by reducing the temperature gradient across the wafer, by reducing the maximum wafer temperature, and also by reducing the number and intensity of localized hot spots. A possible way to enhance heat transfer in systems with high power density is to change the phase in the micro-channels embedded in the device. This has motivated a number of theoretical and experimental investigations covering various aspects of heat transfer in micro-channel heat sinks with phase change. The ow and heat transfer in heated micro-channels are accompanied by a n- ber of thermohydrodynamic processes, such as liquid heating and vaporization, bo- ing, formation of two-phase mixtures with a very complicated inner structure, etc., which affect signi cantly the hydrodynamic and thermal characteristics of the co- ing systems.
Download or read book Proceedings of the ASME Summer Heat Transfer Conference 2009 Combustion fire and reacting flow Heat transfer in multiphase systems Heat transfer in transport phenomena in manufacturing and materials processing Heat and mass transfer in biotechnology Low temperature heat transfer Environmental heat transfer Heat transfer education Visualization of heat transfer written by and published by . This book was released on 2009 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 104 full-length, peer-reviewed technical papers. It covers such topics as: Combustion, Fire and Reacting Flow; Heat Transfer in Multiphase Systems; Heat Transfer in Transport Phenomena in Manufacturing and Materials Processing; Heat and Mass Transfer in Biotechnology; Heat Transfer Education; and, Visualization of Heat Transfer.
Download or read book Multiphase Flow Handbook Second Edition written by Efstathios Michaelides and published by CRC Press. This book was released on 2016-10-26 with total page 1559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.
Download or read book Multiphase Flow Dynamics 4 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear thermal hydraulic is the science providing knowledge about the physical processes occurring during the transferring the fission heat released in structural materials due to nuclear reactions into its environment. Along its way to the environment the thermal energy is organized to provide useful mechanical work or useful heat or both. Chapter 1 contains introductory information about the heat release in the re- tor core, the thermal power and thermal power density in the fuel, structures and moderator, the influence of the thermal power density on the coolant temperature, the spatial distribution of the thermal power density. Finally some measures are introduced for equalizing of the spatial distribution of the thermal power density. Chapter 2 gives the methods for describing of the steady and of the transient temperature fields in the fuel elements. Some information is provided regarding influence of the cladding oxidation, hydrogen diffusion and of the corrosion pr- uct deposition on the temperature fields. Didactically the nuclear thermal hydraulic needs introductions at different level of complexity by introducing step by step the new features after the previous are clearly presented. The followed two Chapters serve this purpose. Chapter 3 describes mathematically the “simple” steady boiling flow in a pipe. The steady mass-, momentum- and energy conservation equations are solved at different level of complexity by removing one after the other simplifying assu- tions. First the idea of mechanical and thermodynamic equilibrium is introduced.
Download or read book CFD Modeling and Simulation in Materials Processing written by Laurentiu Nastac and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15, 2012
