Download or read book Multipactor in Accelerating Cavities written by Valery D. Shemelin and published by Springer Nature. This book was released on 2020-08-10 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by two world-recognized experts in radio frequency (RF) systems for particle accelerators and is based on many years of experience in dealing with the multipactor phenomenon. The authors introduce and review multipactor in RF cavities for scientists and engineers working in the field of accelerator physics and technology. The multipactor phenomenon of unintended electron avalanches occurs in the RF cavities commonly and quite often is a performance-limiting factor. The book starts with an Introductory Overview which contains historical observations and brief description of most common aspects of the phenomenon. Part I deals with the multipactor in a flat gap. It starts with description of the dynamics of electrons, derivation of the stability condition and analyzing influence of several factors on the multipactor. Then, the initial considerations are extended to derive a generalized phase stability and finally a particular case, called ping-pong multipacting, is considered. The part one is concluded with a brief review of computer codes used in multipactor simulations. Part II is dedicated to the multipactor in crossed RF fields, the typical situation in accelerating cavities. Two cases of MP are considered: a two-point multipactor near the cavity equator in elliptical cavities and a one-point multipactor. Part III describes optimization of the cavity shapes geared toward designing multipactor-free structures. The book will serve as an importance reference on multipactor for those involved in developing and operating radio frequency cavities for particle accelerators.
Download or read book Electromagnetic and Multipactor Stresses on RF Windows in Drift Tube Linear Accelerators written by Thomas Wesley Hall and published by . This book was released on 2019 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio frequency (RF) particle accelerators are a key component to many scientific and industrial endeavors, so their reliable operation is of great concern. An obstacle to reliable operation has been the performance of the RF windows that act as barriers between the vacuum environment of the accelerating cavities and atmospheric conditions in the transmission line. Failures of these windows have a large impact on accelerator availability, and recovering from a window failure is a multiple day event. In order to mitigate these failures, an analysis of the stresses placed on the window has been performed. This dissertation presents simulations of the stresses placed on the window due to the electromagnetic environment and the multipactor effect with a discussion of how to minimize those stresses. The electromagnetic environment was first analyzed using the commercially available CST Microwave Studio software. An analysis of the window geometry in isolation from the accelerating cavity is performed first to minimize the stresses placed on it. Then the analysis of the whole system with the cavity present was performed using an approach that was developed to allow transient simulations of the highly resonant cavity. Simulations show how the signal develops over time, thus allowing adjustments to be made to the driving signal to minimize stresses. Simulations also demonstrate the effect of harmonics and their excitement of higher order modes, and the effect of an off-resonant cavity is briefly discussed. Multipactor is a parasitic phenomenon whereby large electron populations accumulate and is common to accelerator systems. The principles and simulation techniques of multipactor are first presented, and benchmarks are presented to illustrate the validity of the simulations. The conditions of both traveling and standing waves are examined for the effect on multipactor development and electron collisions with the window. The broad analysis of many standing wave conditions allows for mitigation of multipactor in consideration of the signal analyzed in the electromagnetic simulations. Effects of window material and charge accumulation on the window are discussed, and the consideration of the harmonics and higher order modes analyzed previously are shown to have negligible effect on multipactor.
Download or read book Vacuum and multipactor performance of the hadron electron ring accelerator 52 mhz cavities written by R. J. Burton and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Science ICCS 2002 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-01 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science is the scientific discipline that aims at the development and understanding of new computational methods and techniques to model and simulate complex systems. The area of application includes natural systems - such as biology environ mental and geo-sciences, physics, and chemistry - and synthetic systems such as electronics and financial and economic systems. The discipline is a bridge bet ween 'classical' computer science - logic, complexity, architecture, algorithm- mathematics, and the use of computers in the aforementioned areas. The relevance for society stems from the numerous challenges that exist in the various science and engineering disciplines, which can be tackled by advances made in this field. For instance new models and methods to study environmental issues like the quality of air, water, and soil, and weather and climate predictions through simulations, as well as the simulation-supported development of cars, airplanes, and medical and transport systems etc. Paraphrasing R. Kenway (R.D. Kenway, Contemporary Physics. 1994): 'There is an important message to scientists, politicians, and industrialists: in the future science, the best industrial design and manufacture, the greatest medical progress, and the most accurate environmental monitoring and forecasting will be done by countries that most rapidly exploit the full potential of computational science'. Nowadays we have access to high-end computer architectures and a large range of computing environments, mainly as a consequence of the enormous sti mulus from the various international programs on advanced computing, e.g.
Download or read book Studies of Superconducting Cavities for Heavy Ion Accelerators written by Peter Hutson Ceperley and published by . This book was released on 1972 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.
Download or read book European Particle Accelerator Conference Epac 94 In 3 Volumes written by Christine Petit-jean-genaz and published by World Scientific. This book was released on 1994-11-26 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings aim to provide a comprehensive overview of research, technology and applications in the field of accelerators. Contributions from the entire field of accelerators are presented, including low and high energy machines, and medical and industrial accelerators.
Download or read book Proceedings of the 1999 Particle Accelerator Conference written by and published by . This book was released on 1999 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances Of Accelerator Physics And Technologies written by Herwig Schopper and published by World Scientific. This book was released on 1993-03-12 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, consisting of articles written by experts with international repute and long experience, reviews the state of the art of accelerator physics and technologies and the use of accelerators in research, industry and medicine. It covers a wide range of topics, from basic problems concerning the performance of circular and linear accelerators to technical issues and related fields. Also discussed are recent achievements that are of particular interest (such as RF quadrupole acceleration, ion sources and storage rings) and new technologies (such as superconductivity for magnets and RF cavities).The book will interest not only researchers and engineers in the field of accelerator development but also users of accelerators in research and industry. Moreover, teachers giving courses on accelerators and their applications will profit by learning about the most recent achievements and future possibilities.
Download or read book Multipactor Physics Acceleration and Breakdown in Dielectric Loaded Accelerating Structures written by and published by . This book was released on 2016 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this 3-year program is to study the physics issues associated with rf acceleration in dielectric-loaded accelerating (DLA) structures, with a focus on the key issue of multipactor loading, which has been found to cause very significant rf power loss in DLA structures whenever the rf pulsewidth exceeds the multipactor risetime (~10 ns). The experiments are carried out in the X-band magnicon laboratory at the Naval Research Laboratory (NRL) in collaboration with Argonne National Laboratory (ANL) and Euclid Techlabs LLC, who develop the test structures with support from the DoE SBIR program. There are two main elements in the research program: (1) high-power tests of DLA structures using the magnicon output (20 MW @11.4 GHz), and (2) tests of electron acceleration in DLA structures using relativistic electrons from a compact X-band accelerator. The work during this period has focused on a study of the use of an axial magnetic field to suppress multipactor in DLA structures, with several new high power tests carried out at NRL, and on preparation of the accelerator for the electron acceleration experiments.
Download or read book Multipactor Discharge written by Ágúst Valfells and published by . This book was released on 2000 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers of Particle Beams written by and published by . This book was released on 1988 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.
Download or read book INIS Atomindex written by and published by . This book was released on 1994 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Accelerator Physics and Engineering written by Alexander Wu Chao and published by World Scientific. This book was released on 2013 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing more than 100 new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to the common formulae of previous compilations, hard-to-find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world''s most able practitioners of the art and science of accelerators.The eight chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities associated with the various interactions mentioned. A chapter on operational considerations includes discussions on the assessment and correction of orbit and optics errors, real-time feedbacks, generation of short photon pulses, bunch compression, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement and acceleration (both normal conducting and superconducting) receive detailed treatment in a subsystems chapter, beam measurement techniques and apparatus being treated therein as well. The closing chapter gives data and methods for radiation protection computations as well as much data on radiation damage to various materials and devices.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.
Download or read book Frontiers Of Accelerator Technology Proceedings Of The Joint Us cern japan International School written by Melvin Month and published by World Scientific. This book was released on 1996-10-25 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Topical course on Frontiers of Accelerator Technology, jointly organized by the CERN Accelerator School, the KEK Accelerator School and the US Particle Accelerator School. It was held at Maui, Hawaii, November 3-9, 1994. The purpose was to disseminate knowledge on the latest ideas and developments in the technology of particle accelerators by bringing together world known experts and younger scientists in the field. It was intended for individuals with professional interest in accelerator physics and technology, for graduate students, for post-docs and for those working in accelerator-based sciences.The motivation to conceive and build accelerators comes from a most fundamental need of man — to understand and control the world around us. With beams and their associated accelerators, scientists and engineers can gain understanding of the nature of matter and modify matter not possible by other means. Areas already influenced by the developments in accelerator technology are high energy and nuclear physics, atomic and molecular physics, condensed matter physics and the biological sciences. There is also a growing number of applications in medicine and industry. The program was as follows: lectures in superconductivity, magnets, RF, feedback, instrumentation, high power sources, beam stability and novel accelerator techniques; seminars on accelerator applications, the role of government and industry, and perspectives on future technology; round table: the high energy accelerator frontier; four short courses, each including 8 hours of lectures, problems and tutorials on superconducting magnets, superconducting rf, instrumentation and linacs.This book aims to summarize all the currently available knowledge on the technology driving the development of particle beams for science, medicine, and industry. It is the most up-to-date and unique collection of information on this technology presently available.
