Download or read book Multiharmonic Tuning Behavior of MOSFET RF Power Amplifiers written by Yucai Zhang and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates multiharmonic tuning of RF power amplifiers using power MOSFETs implemented in bulk silicon CMOS technology. The use of this technique may lead to the low-cost implementation of the RF power amplifier integrated on the same chip as the rest of the wireless transceiver. The work proposes a complete classification of multiharmonic tuning into four basic modes: both odd/even harmonics SHORT (SS), odd harmonics SHORT and even harmonics OPEN (SO), odd harmonics OPEN and even harmonics SHORT (OS), and both odd/even harmonics OPEN (OO). Conventional power amplifiers can then be characterized using these modes of operation in so far as multiharmonic tuning is concerned. A systematic multiharmonic tuning optimization procedure is introduced to find the optimal harmonic terminations. The newly proposed OO mode features a sinusoidal drain current waveform containing no harmonics, resulting in little or no energy wasted at harmonic frequencies and yielding high efficiency. To study the multiharmonic tuning behavior of MOSFET RF power amplifiers, power MOSFETs were implemented in a 0.25[mu]m silicon CMOS process. For power amplifiers using these MOSFETs, at 1.88GHz, the OO mode yields the highest efficiency (PAE = 61%) with a 23.3dBm output power at a 12dBm input power and at a 2.0V supply voltage.
Download or read book Multiharmonic Tuning Behavior of MOSFET RF Power Amplifiers written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF and Microwave Power Amplifier Design written by Andrei Grebennikov and published by McGraw Hill Professional. This book was released on 2004-09-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.
Download or read book Behavioral Modeling and Linearization of RF Power Amplifiers written by John Wood and published by Artech House. This book was released on 2014-06-01 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless voice and data communications have made great improvements, with connectivity now virtually ubiquitous. Users are demanding essentially perfect transmission and reception of voice and data. The infrastructure that supports this wide connectivity and nearly error-free delivery of information is complex, costly, and continually being improved. This resource describes the mathematical methods and practical implementations of linearization techniques for RF power amplifiers for mobile communications. This includes a review of RF power amplifier design for high efficiency operation. Readers are also provided with mathematical approaches to modeling nonlinear dynamical systems, which can be applied in the context of modeling the PA for identification in a pre-distortion system. This book also describes typical approaches to linearization and digital pre-distortion that are used in practice.
Download or read book Silicon RF Power MOSFETS written by B. Jayant Baliga and published by World Scientific. This book was released on 2005 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The world-wide proliferation of cellular networks has revolutionized telecommunication systems. The transition from Analog to Digital RF technology enabled substantial increase in voice traffic using available spectrum, and subsequently the delivery of digitally based text messaging, graphics and even streaming video. The deployment of digital networks has required migration to multi-carrier RF power amplifiers with stringent demands on linearity and efficiency. This book describes the physics, design considerations and RF performance of silicon power Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs) that are at the heart of the power amplifiers. The recent invention and commercialization of RF power MOSFETs based on the super-linear mode of operation is described in this book for the first time. In addition to the analytical treatment of the physics, extensive description of transistor operation is provided by using the results of numerical simulations. Many novel power MOSFET structures are analyzed and their performance is compared with those of the laterally-diffused (LD) MOSFET that are currently used in 2G and 3G networks."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved
Download or read book Distortion in RF Power Amplifiers written by Joel Vuolevi and published by Artech House. This book was released on 2003 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a thorough treatment of distortion in RF power amplifiers. This unique resource offers expert guidance in designing easily linearizable systems that have low memory effects. It offers you a detailed understanding of how the matching impedances of a power amplifier and other RF circuits can be tuned to minimize overall distortion. What's more, you see how to build models that can be used for distortion simulations.
Download or read book Switchmode RF and Microwave Power Amplifiers written by Andrei Grebennikov and published by Academic Press. This book was released on 2012-06-28 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining solid theoretical discussions with practical design examples, this book is an essential reference on developing RF and microwave switchmode power amplifiers. With this book you will be able to: Design high-efficiency RF and microwave power amplifiers on different types of bipolar and field-effect transistors using well-known and novel theoretical approaches, nonlinear simulation tools, and practical design techniques Design any type of high-efficiency switchmode power amplifiers operating in Class D or E at lower frequencies and in Class E or F and their subclasses at microwave frequencies, with specified output power Understand the theory and practical implementation of load-network design techniques based on lumped and transmission-line elements Combine multi-stage Doherty architecture and switchmode power amplifiers to significantly increase efficiency of the entire radio transmitter Learn the different types of predistortion linearization techniques required to improve the quality of signal transmission in a nonlinear amplifying system New to this edition: Comprehensive overview of different Doherty architectures which are, and will be used in modern communication systems to save power consumption and reduce costs A new chapter on analog and digital predistortion techniques Coverage of broadband Class-F power amplifiers, high-power inverse Class-F power amplifiers for WCDMA systems, broadband Class-E techniques Unique focus on switchmode RF and microwave power amplifiers that are widely used in cellular/wireless, satellite and radar communication systems and which offer major power consumption savings Complete coverage of the new Doherty architecture which offers major efficiencies and savings on power consumption Balances theory with practical implementatation, avoiding a cookbook approach, enabling engineers to develop better designs Trusted content from leading figures in the field with a Foreword of endorsement by Zoya Popovic
Download or read book Microwave Heterostructure Device Characterization and Modeling for Their High power and Low noise Properties written by Shuo-Hung Hsu and published by . This book was released on 2003 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF CMOS Power Amplifiers written by Mona M. Hella and published by . This book was released on 2014-01-15 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical RF Amplifier Design and Performance Optimization with SPICE and Load and Source pull Techniques written by Amal Banerjee and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains and demonstrates with an exhaustive set of design examples, how common types of radio frequency(RF) amplifiers (classes A, B, AB, C, D, E, F, G and H) can be designed, and then have their performance characteristics evaluated and optimized with SPICE. The author demonstrates the transient analysis features of SPICE, along with industry-standard load- and source-pull techniques to simulate the steady-state, long-term time-domain behavior of any test RF amplifier.
Download or read book Switchmode RF Power Amplifiers written by Andrei Grebennikov and published by Newnes. This book was released on 2011-04-01 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: A majority of people now have a digital mobile device whether it be a cell phone, laptop, or blackberry. Now that we have the mobility we want it to be more versatile and dependable; RF power amplifiers accomplish just that. These amplifiers take a small input and make it stronger and larger creating a wider area of use with a more robust signal. Switching mode RF amplifiers have been theoretically possible for decades, but were largely impractical because they distort analog signals until they are unrecognizable. However, distortion is not an issue with digital signals—like those used by WLANs and digital cell phones—and switching mode RF amplifiers have become a hot area of RF/wireless design. This book explores both the theory behind switching mode RF amplifiers and design techniques for them. *Provides essential design and implementation techniques for use in cma2000, WiMAX, and other digital mobile standards *Both authors have written several articles on the topic and are well known in the industry *Includes specific design equations to greatly simplify the design of switchmode amplifiers
Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.
Download or read book Nonlinear Circuit Simulation and Modeling written by José Carlos Pedro and published by Cambridge University Press. This book was released on 2018-06-14 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, tutorial guide to the nonlinear methods and techniques needed to design real-world microwave circuits.
Download or read book Broadband RF and Microwave Amplifiers written by Andrei Grebennikov and published by CRC Press. This book was released on 2017-07-12 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.
Download or read book Handbook of RF and Microwave Power Amplifiers written by John L. B. Walker and published by Cambridge University Press. This book was released on 2012 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a one-stop guide for circuit designers and system/device engineers, covering everything from CAD to reliability.
Download or read book RF Power Amplifiers written by Mihai Albulet and published by SciTech Publishing. This book was released on 2001-06-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews developments in the following fields: RF power amplifiers, modulators and power transistors
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the application of ferroelectric devices to innovative systems. In particular, the use of these materials as varying capacitors, gyroscope, acoustics sensors and actuators, microgenerators and memory devices will be exposed, providing an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric devices.
