Download or read book Multiferroic Materials written by Junling Wang and published by CRC Press. This book was released on 2016-10-14 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: "a very detailed book on multiferroics that will be useful for PhD students and researchers interested in this emerging field of materials science" —Dr. Wilfrid Prellier, Research Director, CNRS, Caen, France Multiferroics has emerged as one of the hottest topics in solid state physics in this millennium. The coexistence of multiple ferroic/antiferroic properties makes them useful both for fundamental studies and practical applications such as revolutionary new memory technologies and next-generation spintronics devices. This book provides an historical introduction to the field, followed by a summary of recent progress in single-phase multiferroics (type-I and type-II), multiferroic composites (bulk and nano composites), and emerging areas such as domain walls and vortices. Each chapter addresses potential technological implications. There is also a section dedicated to theoretical approaches, both phenomenological and first-principles calculations.
Download or read book Multiferroic Materials written by R. Saravanan and published by Materials Research Forum LLC. This book was released on 2023-02-15 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The magnetoelectric properties of multiferroic materials have a high potential for applications in the fields of data storage, spin valves, spintronics, memories, sensors and microelectronic devices. The book presents both a detailed literature review of the field, and the experimental results obtained from various characterization and analytical techniques performed on four series of lanthanum orthoferrite type multiferroics. These materials have been used in solid oxide fuel cells (SOFC), magneto-hydrodynamic power generation (MHD), capacitors and energy storage devices in microelectronics, non-volatile magnetic memory devices and ferroelectric random access memories (Fe-RAM). Keywords: Multiferroics, Lanthanum Orthoferrites, Ferromagnetism, Ferroelectricity, Electrical Conductivity, Thermal Stability, Dielectric Constant, Solid Oxide Fuel Cell (SOFC), Magneto-Hydrodynamic Power Generation (MHD), Capacitors, Energy Storage Devices, Magnetic Memory Devices, Ferroelectric Random Access Memories (Fe-RAM), Charge Density Measurements..
Download or read book Multiferroic Materials written by Junling Wang and published by CRC Press. This book was released on 2016-10-14 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "a very detailed book on multiferroics that will be useful for PhD students and researchers interested in this emerging field of materials science" —Dr. Wilfrid Prellier, Research Director, CNRS, Caen, France Multiferroics has emerged as one of the hottest topics in solid state physics in this millennium. The coexistence of multiple ferroic/antiferroic properties makes them useful both for fundamental studies and practical applications such as revolutionary new memory technologies and next-generation spintronics devices. This book provides an historical introduction to the field, followed by a summary of recent progress in single-phase multiferroics (type-I and type-II), multiferroic composites (bulk and nano composites), and emerging areas such as domain walls and vortices. Each chapter addresses potential technological implications. There is also a section dedicated to theoretical approaches, both phenomenological and first-principles calculations.
Download or read book Nanoscale Ferroelectric Multiferroic Materials for Energy Harvesting Applications written by Hideo Kimura and published by Elsevier. This book was released on 2019-02-22 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Ferroelectric-Multiferroic Materials for Energy Harvesting Applications presents the latest information in the emerging field of multiferroic materials research, exploring applications in energy conversion and harvesting at the nanoscale. The book covers crystal and microstructure, ferroelectric, piezoelectric and multiferroic physical properties, along with their characterization. Special attention is given to the design and tailoring of ferroelectric, magnetic and multiferroic materials and their interaction among ferroics. The fundamentals of energy conversion are incorporated, along with the requirements of materials for this process. Finally, a range of applications is presented, demonstrating the progression from fundamentals to applied science. This essential resource describes the link between the basic physical properties of these materials and their applications in the field of energy harvest. It will be a useful resource for graduate students, early career researchers, academics and industry professionals working in areas related to energy conversion. Bridges the gap between the fundamentals and applications of ferroelectric and multiferroic materials for energy harvesting Demonstrates how a range of nanomaterials play an important role in the creation of efficient energy harvesting systems Provides new solutions for the fabrication of electronic devices for various applications
Download or read book Ferrites and Multiferroics written by Gagan Kumar Bhargava and published by Springer Nature. This book was released on 2021-12-16 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the fundamentals of ferrites and multiferroic materials with special attention to their structure, types, and properties. It presents a comprehensive survey about ferrite and multiferroic materials, in areas significant to research and development in academia as well as in industry. The book discusses various types of methods applied for their synthesis and characterizations. This book is concerned with the fascinating class of materials with the promise for wide-ranging applications, including electromagnets, magnetic fluid hyperthermia, antenna applications, memory devices, switching circuits, bio-medical applications, actuators, magnetic field sensors and water purification, etc.
Download or read book Multiferroics written by Andres Cano and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-06-21 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiferroics, materials with a coexistence of magnetic and ferroelectric order, provide an efficient route for the control of magnetism by electric fields. The authors cover multiferroic thin-film heterostructures, device architectures and domain/interface effects. They critically discuss achievements as well as limitations and assess opportunities for future applications.
Download or read book Magnetic Ferroelectric and Multiferroic Metal Oxides written by Biljana Stojanovic and published by Elsevier. This book was released on 2018-01-02 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic, Ferroelectric, and Multiferroic Metal Oxides covers the fundamental and theoretical aspects of ferroics and magnetoelectrics, their properties, and important technological applications, serving as the most comprehensive, up-to-date reference on the subject. Organized in four parts, Dr. Biljana Stojanovic leads expert contributors in providing the context to understand the material (Part I: Introduction), the theoretical and practical aspects of ferroelectrics (Part II: Ferroelectrics: From Theory, Structure and Preparation to Application), magnetic metal oxides (Part III: Magnetic Oxides: Ferromagnetics, Antiferromagnetics and Ferrimagnetics), multiferroics (Part IV: Multiferroic Metal Oxides) and future directions in research and application (Part V: Future of Metal Oxide Ferroics and Multiferroics). As ferroelectric materials are used to make capacitors with high dielectric constant, transducers, and actuators, and in sensors, reed heads, and memories based on giant magnetoresistive effects, this book will provide an ideal source for the most updated information. Addresses ferroelectrics, ferromagnetics and multiferroelectrics, providing a one-stop reference for researchers Provides fundamental theory and relevant, important technological applications Highlights their use in capacitors with high dielectric constant, transducers, and actuators, and in sensors, reed heads, and memories based on giant magnetoresistive effects
Download or read book Integrated Multiferroic Heterostructures and Applications written by Ming Liu and published by John Wiley & Sons. This book was released on 2019-04-03 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by well-known experts in the field, this first systematic overview of multiferroic heterostructures summarizes the latest developments, first presenting the fundamental mechanisms, including multiferroic materials synthesis, structures and mechanisms, before going on to look at device applications. The resulting text offers insight and understanding for scientists and students new to this area.
Download or read book Ferroic Materials Based Technologies written by Inamuddin and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: FERROIC MATERIALS-BASED TECHNOLOGIES The book addresses the prospective, relevant, and original research developments in the ferroelectric, magnetic, and multiferroic fields. Ferroic materials have sparked widespread attention because they represent a broad spectrum of elementary physics and are employed in a plethora of fields, including flexible memory, enormous energy harvesting/storage, spintronic functionalities, spin caloritronics, and a large range of other multi-functional devices. With the application of new ferroic materials, strong room-temperature ferroelectricity with high saturation polarization may be established in ferroelectric materials, and magnetism with significant magnetization can be accomplished in magnetic materials. Furthermore, magnetoelectric interaction between ferroelectric and magnetic orderings is high in multiferroic materials, which could enable a wide range of innovative devices. Magnetic, ferroelectric, and multiferroic 2D materials with ultrathin characteristics above ambient temperature are often expected to enable future miniaturization of electronics beyond Moore’s law for energy-efficient nanodevices. This book addresses the prospective, relevant, and original research developments in the ferroelectric, magnetic, and multiferroic fields. Audience The book will interest materials scientists, physicists, and engineers working in ferroic and multiferroic materials.
Download or read book Nanostructured Multiferroics written by Raneesh Balakrishnan and published by John Wiley & Sons. This book was released on 2021-03-05 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the state of the art in multiferroic materials with this cutting-edge resource Nanostructured Multiferroics delivers an overview of recent research developments in the area of nanostructured multiferroics, along with their preparation, characterization, and applications. Covering single-phase and composite multiferroics, nanomultiferroics, and multiferroic composites, the book explains their physical properties, the underlying physical principles, and the technology and application aspects of the materials, including energy harvesting and spintronics. With multiferroics undergoing a renaissance of renewed interest and development in the past few years, and with promising new breakthroughs in areas like superconductivity, spintronics, and quantum computing, Nanostructured Multiferroics offers both experienced scientists and young researchers inspirational and informative resources likely to spark ideas for further research. Along with chapters discussing topics such as the specific heat and magnetocaloric properties of manganite-based multiferroics for cryo-cooling applications and the multiferroic properties of barium-doped BiFeO3 particles, further topics are: * A comprehensive discussion about the physical properties of multiferroic nanocomposites * An exploration of the basic theory underpinning a variety of multiferroic interactions * An in-depth analysis of the engineering functionality in nanomultiferroics * An introduction to nanostructured multiferroics accompanied by discussions of their synthesis, characterization, and common applications * A treatment of multiferroic materials, as well as single-phase and composite multiferroics * An examination of the use of nanostructured multiferroics in the field of spintronics Perfect for materials scientists, Nanostructured Multiferroics will also earn a place in the libraries of solid-state physicists and chemists who seek to improve their understanding of the fundamentals of, and recent advances made in, multiferroics. The information contained within will inform anyone working in areas involving superconductivity, quantum computing, and spintronics.
Download or read book Emerging Materials Technologies and Solutions for Energy Harvesting written by Mehta, Shilpa and published by IGI Global. This book was released on 2024-03-04 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an era dominated by electronic devices and interconnected technologies, the weak point of this technology remains the limited lifespan and lengthy maintenance of conventional batteries. The pervasive use of wireless sensor networks and Internet of Things (IoT) applications has accentuated the inadequacies of battery technology, which has not kept pace with the miniaturization of electronic devices. Frequent battery replacements for remote devices have become a critical bottleneck, hindering the seamless operation of devices that play a pivotal role in various industries. Addressing this universal challenge head-on, Emerging Materials, Technologies, and Solutions for Energy Harvesting emerges as a tool for innovation and sustainability. This book explores energy harvesting, a paradigm shift that transforms ambient energy sources such as thermal gradients, solar energy, radio frequency, and vibration energy into a viable and enduring power solution. By presenting innovative materials, technologies, and solutions, the book is the key to unlocking a future where devices can thrive on efficient, cost-effective, and compact energy harvesting systems, eliminating frequent battery replacements.
Download or read book Functional Materials written by S. Banerjee and published by Elsevier. This book was released on 2011-12-09 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional materials have assumed a very prominent position in several high-tech areas. Such materials are not being classified on the basis of their origin, nature of bonding or processing techniques but are classified on the basis of the functions they can perform. This is a significant departure from the earlier schemes in which materials were described as metals, alloys, ceramics, polymers, glass materials etc. Several new processing techniques have also evolved in the recent past. Because of the diversity of materials and their functions it has become extremely difficult to obtain information from single source. Functional Materials: Preparation, Processing and Applications provides a comprehensive review of the latest developments. Serves as a ready reference for Chemistry, Physics and Materials Science researchers by covering a wide range of functional materials in one book Aids in the design of new materials by emphasizing structure or microstructure – property correlation Covers the processing of functional materials in detail, which helps in conceptualizing the applications of them
Download or read book Materials Science written by Yitzhak Mastai and published by BoD – Books on Demand. This book was released on 2013-06-10 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today modern materials science is a vibrant, emerging scientific discipline at the forefront of physics, chemistry, engineering, biology and medicine, and is becoming increasingly international in scope as demonstrated by emerging international and intercontinental collaborations and exchanges. The overall purpose of this book is to provide timely and in-depth coverage of selected advanced topics in materials science. Divided into five sections, this book provides the latest research developments in many aspects of materials science. This book is of interest to both fundamental research and also to practicing scientists and will prove invaluable to all chemical engineers, industrial chemists and students in industry and academia.
Download or read book Neutron Scattering Magnetic and Quantum Phenomena written by and published by Elsevier. This book was released on 2015-11-29 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neutron Scattering - Magnetic and Quantum Phenomena provides detailed coverage of the application of neutron scattering in condensed matter research. The book's primary aim is to enable researchers in a particular area to identify the aspects of their work where neutron scattering techniques might contribute, conceive the important experiments to be done, assess what is required to carry them out, write a successful proposal for one of the major user facilities, and perform the experiments under the guidance of the appropriate instrument scientist. An earlier series edited by Kurt Sköld and David L. Price, and published in the 1980s by Academic Press as three volumes in the series Methods of Experimental Physics, was very successful and remained the standard reference in the field for several years. This present work has similar goals, taking into account the advances in experimental techniques over the past quarter-century, for example, neutron reflectivity and spin-echo spectroscopy, and techniques for probing the dynamics of complex materials of technological relevance. This volume complements Price and Fernandez-Alonso (Eds.), Neutron Scattering - Fundamentals published in November 2013. Covers the application of neutron scattering techniques in the study of quantum and magnetic phenomena, including superconductivity, multiferroics, and nanomagnetism Presents up-to-date reviews of recent results, aimed at enabling the reader to identify new opportunities and plan neutron scattering experiments in their own field Provides a good balance between theory and experimental techniques Provides a complement to Price and Fernandez-Alonso (Eds.), Neutron Scattering - Fundamentals published in November 2013
Download or read book Thin Film Metal Oxides written by Shriram Ramanathan and published by Springer Science & Business Media. This book was released on 2009-12-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Film Metal-Oxides provides a representative account of the fundamental structure-property relations in oxide thin films. Functional properties of thin film oxides are discussed in the context of applications in emerging electronics and renewable energy technologies. Readers will find a detailed description of deposition and characterization of metal oxide thin films, theoretical treatment of select properties and their functional performance in solid state devices, from leading researchers. Scientists and engineers involved with oxide semiconductors, electronic materials and alternative energy will find Thin Film Metal-Oxides a useful reference.
Download or read book Nanostructured Multiferroics written by Raneesh Balakrishnan and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the state of the art in multiferroic materials with this cutting-edge resource Nanostructured Multiferroics delivers an overview of recent research developments in the area of nanostructured multiferroics, along with their preparation, characterization, and applications. Covering single-phase and composite multiferroics, nanomultiferroics, and multiferroic composites, the book explains their physical properties, the underlying physical principles, and the technology and application aspects of the materials, including energy harvesting and spintronics. With multiferroics undergoing a renaissance of renewed interest and development in the past few years, and with promising new breakthroughs in areas like superconductivity, spintronics, and quantum computing, Nanostructured Multiferroics offers both experienced scientists and young researchers inspirational and informative resources likely to spark ideas for further research. Along with chapters discussing topics such as the specific heat and magnetocaloric properties of manganite-based multiferroics for cryo-cooling applications and the multiferroic properties of barium-doped BiFeO3 particles, further topics are: * A comprehensive discussion about the physical properties of multiferroic nanocomposites * An exploration of the basic theory underpinning a variety of multiferroic interactions * An in-depth analysis of the engineering functionality in nanomultiferroics * An introduction to nanostructured multiferroics accompanied by discussions of their synthesis, characterization, and common applications * A treatment of multiferroic materials, as well as single-phase and composite multiferroics * An examination of the use of nanostructured multiferroics in the field of spintronics Perfect for materials scientists, Nanostructured Multiferroics will also earn a place in the libraries of solid-state physicists and chemists who seek to improve their understanding of the fundamentals of, and recent advances made in, multiferroics. The information contained within will inform anyone working in areas involving superconductivity, quantum computing, and spintronics.
Download or read book Multiferroics written by Andres Cano and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-06-21 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiferroics, materials with a coexistence of magnetic and ferroelectric order, provide an efficient route for the control of magnetism by electric fields. The authors cover multiferroic thin-film heterostructures, device architectures and domain/interface effects. They critically discuss achievements as well as limitations and assess opportunities for future applications.
