Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Download or read book Multiaxial Fatigue and Fracture written by E. Macha and published by Elsevier. This book was released on 1999-09-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growth Most papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.
Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.
Download or read book Advances in Multiaxial Fatigue written by David L. McDowell and published by ASTM International. This book was released on 1993 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the ASTM Symposium on Multiaxial Fatigue, held in San Diego, November 1991, to communicate the most recent international advances in multiaxial cyclic deformation and fatigue research as well as applications to component analysis and design. The 24 papers are grouped into five ca
Download or read book Multiaxial Fatigue written by Keith John Miller and published by ASTM International. This book was released on 1985 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiaxial Fatigue and Fracture A Literature Review written by and published by . This book was released on 1984 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems often arise when attempting to determine the fatigue behaviour of structural components from laboratory data. A major reason for this lack of correlation is that most engineering components operate in stress environments significantly more complicated than uniaxial tension, the stress state in which most research studies are conducted. A review of the literature has shown that virtually all fatigue and fracture properties of metals and components are affected by multidirectional loading. In particular, variations in stress state compared with uniaxial tension produce the following effects: a) decreases in the fatigue limit by up to approximately 50%; b) increases or decreases in low-cycle fatigue life by factors of up to 20, depending on whether the stress in the second direction is tensile or compressive and is static or cyclic; c) out-of-phase loading also reduces the low-cycle fatigue life by a factor of up to 4 compared with in-phase loading; and d) acceleration and retardations of fatigue crack growth rates by factors of 3 to 4 depending on the nature of the transverse stress. It is also evident that multiaxial criteria used for design purposes can be non-conservative, especially under out-of-phase loading, and consequently can lead to unsafe estimates of the fatigue life of a component. Originator supplied keywords include: Multiaxial stress; Low cycle fatigue; Fracture properties; Fatigue tests; Crack propagation; Metal fatigue.
Download or read book Multiaxial Fatigue and Deformation Testing Techniques written by Sreeramesh Kalluri and published by ASTM International. This book was released on 1997 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourteen papers from the May 1995 symposium focus on the advances that new materials testing equipment and digital computers have made possible. Representative topics: testing facilities for multiaxial loading of tubular specimens, biaxial deformation experiments over multiple string regimes, charac
Download or read book Stochastic Modeling of Multiaxial Fatigue and Fracture written by Yongming Liu and published by . This book was released on 2006 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiaxial Fatigue and Deformation written by Sreeramesh Kalluri and published by ASTM International. This book was released on 2000 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from a May 1999 symposium, describing state-of-the-art multiaxial testing techniques and analytical methods for characterizing fatigue and deformation behaviors of engineering materials. Papers are classified into sections on multiaxial strength of materials, multiaxial deformation,
Download or read book Multiaxial Notch Fatigue written by Luca Susmel and published by Elsevier. This book was released on 2009-03-20 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal and composite components used in structural engineering not only contain geometrical features resulting in stress concentration phenomena, but they are also subjected to in-service multiaxial fatigue loading. To address the problem, structural engineers need reliable methodologies which allow for an adequate margin of safety. The book summarises methods devised by the author to design real components against multiaxial fatigue by taking full advantage not only of nominal but also of local stress-strain quantities.The book begins by reviewing definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment. The Modified Wöhler Curve Method is then explained in detail, by focusing attention on both the high- and the medium-cycle fatigue regime. The existing links between the multiaxial fatigue criterion and physical properties are also discussed. A procedure suitable for employing the method developed by the author to estimate fatigue damage both in notched and in welded components is explained. The Modified Manson-Coffin Curve method is investigated in depth, by reviewing those concepts playing a fundamental role in the so-called strain based approach. Lastly, the problem of performing the fatigue assessment of composite materials is addressed by considering design parameters influencing composite behaviour under complex cyclic loading paths and those criteria suitable for designing real components against multiaxial fatigue. The book also contains two appendices summarising experimental data from the technical literature. These appendices provide a unique and highly valuable resource for engineers. The appendices summarise around 100 values of the material characteristic length L, experimentally determined by testing specimens made of different engineering materials and about 4500 experimental fatigue results generated by testing plain, notched and welded specimens under constant-amplitude proportional and non-proportional multiaxial fatigue loading are listed. Summarises methods devised by the author to design real components against multiaxial fatigue Reviews definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment Includes an in-depth explanation of both the Modified Wöhler Curve and Modified Manson-Coffin Curve Method
Download or read book Mixed mode Fracture in Ductile Materials and Low cycle Multiaxial Fatigue Theory written by Yenkai Wang and published by . This book was released on 1998 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the sixth International Conference on Biaxial Multiaxial Fatigue Fracture written by International Conference on Biaxial, Multiaxial Fatigue and Fracture and published by . This book was released on 2001 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biaxial and Multiaxial Fatigue EGF 3 written by M. W. Brown and published by . This book was released on 1989 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 36 paper spresented in this volume were presented at the second international conference on biaxial/multiaxial fatigue.
Download or read book A Review of Multiaxial Fatigue and Fracture of Fibre reinforced Composites U written by Paul William Beaver and published by . This book was released on 1987 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of the limited number of papers in the literature on multiaxial fatigue and fracture of fibre-reinforced composites has shown that biaxial stress states can have a significant effect on both the fatigue and fracture properties of these materials. In addition, none of the presently available failure theories for composites agrees with the observed experimental results with sufficient accuracy to be confidently used for design purposes. Keywords: Multiaxial stress, Fracture strength, Fatigue life, Fatigue limit, Fibre reinforced composites, Australia.
Download or read book Biaxial multiaxial Fatigue and Fracture written by L. P. Pook and published by . This book was released on 2003 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Creep in Structures written by S. Murakami and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain 48 innovative papers consolidating the development of creep research since 1990 and discussing the new horizons in this fundamental field of applied mechanics in the coming century. This volume is useful for researchers and graduate course students in the relevant fields.
