Download or read book Multi Stage Simultaneous Lot Sizing and Scheduling written by Florian Seeanner and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to a varying product demand (changing product mix) and different production speeds, bottlenecks may shift between the stages. In that case, a simultaneous lot-sizing and scheduling of these stages is recommendable. Hence, an improved version of the General Lot-Sizing and Scheduling Problem for Multiple production Stages (GLSPMS) was developed. Moreover, several reformulation techniques were applied to this model to solve it exactly. Besides, a new meta-heuristic which combines the principles of Variable Neighborhood Decomposition Search (VNDS) and Exchange was implemented to find good solutions, even for a real-world problem case. Finally, further model extensions, e.g., for scarce setup resources, were proposed.
Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.
Download or read book Deterministic Lot Sizing and Scheduling in Multi stage Production Systems written by Jamal Ouenniche and published by . This book was released on 1995 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Perspectives on Managerial Decision Making written by Herbert Dawid and published by Springer. This book was released on 2016-09-15 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects research papers addressing topical issues in economics and management with a particular focus on dynamic models which allow to analyze and foster the decision making of firms in dynamic complex environments. The scope of the contributions ranges from daily operational challenges firms face to strategic choices in dynamic industry environments and the analysis of optimal growth paths. The volume also highlights recent methodological developments in the areas of dynamic optimization, dynamic games and meta-heuristics, which help to improve our understanding of (optimal) decision making in a fast evolving economy.
Download or read book Multi Level Capacitated Lotsizing with Setup Carryover written by Lisbeth Buschkühl and published by Springer. This book was released on 2019-02-19 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lotsizing problems are found in every company, which produces various items on resources with scarce capacities. In general, the objective is to find production plans, which meet demand with the resources` given capacities and at minimal costs. However, there is a great variety of company-specific lotsizing problems due to the complexity of the underlying production processes. Both standard MRP-systems and modern Advanced Planning Systems fail to provide adequate solutions. Instead, they most often compute production plans, which are not feasible in practice. In this book new lotsizing models are presented for multi-stage production systems with general product structures, dynamic demand, setup times and lead times. They are extended to cover production on parallel machines. An iterative solution procedure is presented, which generates feasible production plans within seconds of computation time. Potential readership includes scholars of supply chain management and production planning, interested students in these areas as well as practitioners involved in production planning.
Download or read book The Multi product Multi stage Lot Sizing and Scheduling Problem in Flow Shops written by Jamal Ouenniche and published by . This book was released on 1995 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metaheuristics for Scheduling in Industrial and Manufacturing Applications written by Fatos Xhafa and published by Springer. This book was released on 2008-08-22 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decades scheduling has been among the most studied op- mization problemsanditisstillanactiveareaofresearch!Schedulingappears in many areas of science, engineering and industry and takes di?erent forms depending on the restrictions and optimization criteria of the operating en- ronments [8]. For instance, in optimization and computer science, scheduling has been de?ned as “the allocation of tasks to resources over time in order to achieve optimality in one or more objective criteria in an e?cient way” and in production as “production schedule, i. e. , the planning of the production or the sequence of operations according to which jobs pass through machines and is optimal with respect to certain optimization criteria. ” Although there is a standardized form of stating any scheduling problem, namely “e?cient allocation ofn jobs onm machines –which can process no more than one activity at a time– with the objective to optimize some - jective function of the job completion times”, scheduling is in fact a family of problems. Indeed, several parameters intervene in the problem de?nition: (a) job characteristics (preemptive or not, precedence constraints, release dates, etc. ); (b) resource environment (single vs. parallel machines, un- lated machines, identical or uniform machines, etc. ); (c) optimization criteria (minimize total tardiness, the number of late jobs, makespan, ?owtime, etc. ; maximize resource utilization, etc. ); and, (d) scheduling environment (static vs. dynamic,intheformerthenumberofjobstobeconsideredandtheirready times are available while in the later the number of jobs and their charact- istics change over time).
Download or read book Lotsizing and Scheduling for Production Planning written by Knut Haase and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Billions of dollars are tied up in the inventories of manufacturing companies which cause large (interest) costs. A small decrease of the inventory and/or production costs without reduction of the service level can increase the profit substantially. Especially in the case of scarce capacity, efficient production schedules are fundamental for short delivery time and on-time delivery which are important competitive priorities. To support decision makers by improving their manufacturing resource planning system with appropriate methods is one of the most of production planning. interesting challenges The following chapters contain new models and new solution strategies which may be helpful for decision makers and for further research in the areas of production planning and operations research. The main subject is on lotsizing and scheduling. The objectives and further characteristics of such problems can be inferred from practical need. Thus, before an outline is given, we consider the general objectives of lotsizing and scheduling and classify the most important characteristics of such problems in the following sections.
Download or read book Closing the Gap Between Practice and Research in Industrial Engineering written by Elisabeth Viles and published by Springer. This book was released on 2017-08-17 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the XXII International Conference on Industrial Engineering and Operations Management, International IIE Conference 2016, and International AIM Conference 2016. This joint conference is a result of an agreement between ADINGOR (Asociación para el Desarrollo de la Ingeniería de Organización), ABEPRO (Associação Brasileira de Engenharia de Produção), AIM (European Academy for Industrial Management) and the IIE (Institute of Industrial Engineers), and took place at TECNUN-School of Engineering (San Sebastián, Spain) from July 13th to 15th, 2016. The book includes the latest research advances and cutting-edge analyses of real case studies in Industrial Engineering and Operations Management from diverse international contexts, while also identifying concrete business applications for the latest findings and innovations in operations management and the decisions sciences.
Download or read book 27th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2017-09-21 with total page 3064 pages. Available in PDF, EPUB and Kindle. Book excerpt: 27th European Symposium on Computer Aided Process Engineering, Volume 40 contains the papers presented at the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event held in Barcelona, October 1-5, 2017. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. Presents findings and discussions from the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event
Download or read book Lot Sizing and Scheduling for Flexible Flow Lines written by Daniel Quadt and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book considers the lot-sizing and scheduling problem for flexible flow line production facilities. Flexible flow lines are flow lines with parallel machines on some or all production stages. They can be found in a vast number of industries. A three-phased solution approach is presented that solves the integrated lot-sizing and scheduling problem in a hierarchical manner. The approach is able to handle several important features relevant in industrial practice, such as back-orders and setup carry-over. The developed solution procedures solve practically sized problems in a relatively short amount of time. One of the procedures is based on a novel mixed integer programming (MIP) model, which employs integer variables instead of binary variables. This makes it possible to find (near-)optimal solutions using standard algorithms such as CPLEX. Another procedure uses two nested Genetic Algorithms. An application of the framework in the semiconductor industry is given.
Download or read book Lot Sizing and Scheduling in Single and Multi stage Manufacturing Systems Survey and Analysis written by Boctor, Fayez F. (Fayez Fouad) and published by Québec : Université Laval, Direction de la recherche, Faculté des sciences de l'administration. This book was released on 1996 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Heuristic Lot sizing scheduling Methodology of a Multi stage Capacitated Production System by Using Load Families written by Woo Seok Chae and published by . This book was released on 1988 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Heuristic Lot sizing Scheduling Methodology of a Multi stage Capacited Production System by Using Load Families written by and published by . This book was released on 1993 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integer Programming and Related Areas written by Rabe v. Randow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fields of integer programming and combinatorial optimization continue to be areas of great vitality, with an ever increasing number of publications and journals appearing. A classified bibliography thus continues to be necessary and useful today, even more so than it did when the project, of which this is the fifth volume, was started in 1970 in the Institut fur Okonometrie und Operations Research of the University of Bonn. The pioneering first volume was compiled by Claus Kastning during the years 1970 - 1975 and appeared in 1976 as Volume 128 of the series Lecture Notes in Economics and Mathematical Systems published by the Springer Verlag. Work on the project was continued by Dirk Hausmann, Reinhardt Euler, and Rabe von Randow, and resulted in the publication of the second, third, and fourth volumes in 1978, 1982, and 1985 (Volumes 160, 197, and 243 of the above series). The present book constitutes the fifth volume of the bibliography and covers the period from autumn 1984 to the end of 1987. It contains 5864 new publications by 4480 authors and was compiled by Rabe von Randow. Its form is practically identical to that of the first four volumes, some additions having been made to the subject list.
Download or read book Beyond Manufacturing Resource Planning MRP II written by Andreas Drexl and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The logic of Manufacturing Resource Planning (MRP II) is im plemented in most commercial production planning software tools and is commonly accepted by practitioners. However, these peo ple are not satisfied with production planning and complain about long lead times, high work-in-process, and backlogging. As many researchers have pointed out, the reason for these shortcomings is inherent to the methods that are used. The research community is thus eager to find more sophisticated approaches. This book is an attempt to compile some state-of-the-art work in the field of production planning research. It includes mate rial that somehow dominates the existing MRP II concept. 15 ar ticles written by 36 authors from 10 countries cover many aspects related to MRP II. All papers went through a single-blind refere eing process before they were selected for being published in this book. When we received papers for this issue, we discovered that MRP II is a topic about which not only management scientists show interest. As the list of authors proves, industrial engineers, computer scientists, and-operations researchers from academia as well as practitioners have contributed to this book. This, we hope, makes the book of value for a broad audience. We thank all authors who submitted papers. And, we are in debted to Dr. Werner Muller from Springer for his support in this book project.
Download or read book The Multi product Multi stage Lot Sizing and Scheduling Problem in Flow Shops written by Jamal Ouenniche and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: