Download or read book Multi scale Processing of Powder based Aluminum Alloys written by Jimmy J. Patel and published by . This book was released on 2011 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research work involves macro and micro scale processing of Al-alloys. At micro level, pillars were generated from AL-Sn-Mg powders and binder mixture. Both conventional and current activated sintering processes were investigated in order to do sintering. Two types of binders and solvent system were investigated. Paraffin wax (PW) and n-heptane was used with AL-Sn-Mg powders and polyethylene glycol (PEG) and water was used with Al-SN powders. Setup was designed and fabricated to generate pillars and for DC current activated sintering. Rolling technique and very low pressure was applied in this application. At macro level, press and sinter technique was investigated to compare the mechanical properties such as density, hardness and shrinkage of mechanically alloyed Al-Sn-Mg powders and unmilled powders. The result shows that the MA powders have higher mechanical properties compared to unmilled powders. However, unmilled powder compact sintered very nicely and used for further processing. Green pillars were successfully generated using both binder systems. For sintering, conventional sintering appeared more successful than current activated sintering.
Download or read book Rapidly Solidified Powder Aluminum Alloys written by Morris E. Fine and published by ASTM International. This book was released on 1986 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.
Download or read book Post Processing Techniques for Metal Based Additive Manufacturing written by Hao Wang and published by CRC Press. This book was released on 2023-09-04 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shares insights on post-processing techniques adopted to achieve precision-grade surfaces of additive manufactured metals including material characterization techniques and the identified material properties. Post-processes are discussed from support structure removal and heat treatment to the material removal processes including hybrid manufacturing. Also discussed are case studies on unique applications of additive manufactured metals as an exemplary of the considerations taken during post-processing design and selection. Addresses the critical aspect of post-processing for metal additive manufacturing Provides systematic introduction of pertinent materials Demonstrates post-process technique selection with the enhanced understanding of material characterization methods and evaluation Includes in-depth validation of ultra-precision machining technology Reviews precision fabrication of industrial-grade titanium alloys, steels, and aluminium alloys, with additive manufacturing technology The book is aimed at researchers, professionals, and graduate students in advanced manufacturing, additive manufacturing, machining, and materials processing.
Download or read book Advanced Materials and Manufacturing Processes written by Amar Patnaik and published by CRC Press. This book was released on 2021-10-14 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book High strength Powder Metallurgy Aluminum Alloys written by Michael J. Koczak and published by . This book was released on 1982 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical Processing of Aluminum Alloys written by James G. Morris and published by . This book was released on 1979 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.
Download or read book Advances in Processing of Lightweight Metal Alloys and Composites written by R. Vaira Vignesh and published by Springer Nature. This book was released on 2022-11-18 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important aspects of lightweight metal alloys including history, physical metallurgy, overview of production technologies, alloy development, compositing, post-processing (heat treatment, surface engineering, bulk-deformation), and joining methodologies. It discusses the microstructural evolution, fractography, morphology of corroded and worn surface to enable easy understanding of the mechanism. The topics covered in this book include lightweight metallic materials, instrumental characterization of light weight metal alloys and composites, severe plastic deformation processing of aluminum alloys, solid-state welding of aluminum alloys, aluminum metal matrix composite for automotive and aircraft applications, and heat treatment of aluminum metal matrix composites. The book is highly useful for students, researchers, academicians, scientists, and engineers working on lightweight materials.
Download or read book Metal Powder Based Additive Manufacturing written by Kun Zhou and published by John Wiley & Sons. This book was released on 2023-05-08 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Powder—Based Additive Manufacturing Highly comprehensive resource covering all key aspects of the current developments of metal powder—based additive manufacturing Metal Powder—Based Additive Manufacturing provides valuable knowledge and critical insights regarding the recent advances in various metal powder—based additive manufacturing techniques. This book also reviews typical powder preparation processes and highlights the significance of metal powder—based additive manufacturing for various industrial applications. The key features covered in this book: A rigorous overview of the underlying theories and practical applications of metal powder—based additive manufacturing techniques, including laser powder bed fusion, electron beam melting, laser-based directed energy deposition, and metal binder jetting. An expansive introduction of each technique and its significance pertaining to the printing processes, metallurgical defects, powder materials, equipment, and the microstructures and mechanical properties of the printed parts. A deep exploration of the preparation processes of metal powders for additive manufacturing and the effects of different processes on the powder properties. Comprehensive case studies of parts printed by metal powder—based additive manufacturing for various industrial applications. By providing extensive coverage of relevant concepts in the field of metal powder—based additive manufacturing, this book highlights its essential role in Industry 4.0 and serves as a valuable resource for scientists, engineers, and students in materials science, powder metallurgy, physics, and chemistry. The rich research experience of the authors in additive manufacturing ensures that the readers are provided with both an in-depth understanding and informative technical guidance of metal powder—based additive manufacturing.
Download or read book Age hardenable Aluminium Alloys written by István Kovács and published by . This book was released on 1987 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents more than 60 papers on various topics of current interest, concerning the development of new types of alloys, trace elements, analytical techniques, the physics of the decomposition process, dislocation structure and technological applications.
Download or read book Recommended Values of Thermophysical Properties for Selected Commercial Alloys written by K. C. Mills and published by Woodhead Publishing. This book was released on 2002 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Powder Metallurgy Aluminum Alloys an Overview written by M. J. Koczak and published by . This book was released on 1989 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The historic development of aluminum powder metallurgy dates back to the early 1900's with initial flake powder production and has matured to the present day production of viable aerospace alloys. Primary powder production and processing techniques, such as atomization and mechanical alloying are reviewed. Processing-microstructure-property relationships in four classes of high performance powder metallurgy (P/M) aluminum alloys are considered. These are (Aluminum-Iron-Cobalt, Aluminum-Iron-Nickel) high strength alloys (Aluminum-Zinc-Magnesium, copper-cobalt); high specific modulus alloys (Aluminum-Lithium-Copper); high temperature alloys (Aluminium-Iron-Cobalt, Aluminum-Iron-Nickel); mechanically alloyed material (Aluminum-Magnesium) and composite alloys. Direct property comparisons with counterpart ingot metallurgy alloys are presented where ever appropriate. Aluminum powder metallurgy alloy development is now at a mature stage of growth where commercial and aerospace application are being sought and developed in competition with traditional aluminum ingot metallurgy, titanium and composite structures. The future growth and development of these alloy systems is vested in reliable economic processing. Keywords: Alloys, High performance powder metallurgy, Production techniques, Microstructures, Processing. (JG).
Download or read book Machine Learning for Powder Based Metal Additive Manufacturing written by Gurminder Singh and published by Elsevier. This book was released on 2024-09-04 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Learning for Powder-based Metal Additive Manufacturing outlines machine learning (ML) methods for additive manufacturing (AM) of metals that will improve product quality, optimize manufacturing processes, and reduce costs. The book combines ML and AM methods to develop intelligent models that train AM techniques in pre-processing, process optimization, and post-processing for optimized microstructure, tensile and fatigue properties, and biocompatibility for various applications. The book covers ML for design in AM, ML for materials development and intelligent monitoring in metal AM, both geometrical deviation and physics informed machine learning modeling, as well as data-driven cost estimation by ML. In addition, optimization for slicing and orientation, ML to create models of materials for AM processes, ML prediction for better mechanical and microstructure prediction, and feature extraction by sensing data are all covered, and each chapter includes a case study. - Covers machine learning (ML) methods for additive manufacturing (AM) of metals that will improve product quality, optimize manufacturing processes, and reduce costs - Combines ML and AM methods to develop intelligent models that train AM techniques in pre-processing, process optimization, and post-processing for optimized microstructure, tensile and fatigue properties, and biocompatibility for various applications - Discusses algorithm development of ML for metal AM, metal AM process modeling and optimization, mathematical and simulation studies of metal AM, and pre- and post-processing smart methods for metal AM
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.
Download or read book Semi Solid Processing of Aluminum Alloys written by Shahrooz Nafisi and published by Springer. This book was released on 2018-06-16 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in great detail the semi-solid processing of aluminum alloys. The authors examine the fundamentals of semi-solid metal processing, provide guidelines for research, illustrate the tools that are employed, and explain the measured parameters for semi-solid processing characterization.
