Download or read book Multi Level Capacitated Lotsizing with Setup Carryover written by Lisbeth Buschkühl and published by Springer. This book was released on 2019-02-19 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lotsizing problems are found in every company, which produces various items on resources with scarce capacities. In general, the objective is to find production plans, which meet demand with the resources` given capacities and at minimal costs. However, there is a great variety of company-specific lotsizing problems due to the complexity of the underlying production processes. Both standard MRP-systems and modern Advanced Planning Systems fail to provide adequate solutions. Instead, they most often compute production plans, which are not feasible in practice. In this book new lotsizing models are presented for multi-stage production systems with general product structures, dynamic demand, setup times and lead times. They are extended to cover production on parallel machines. An iterative solution procedure is presented, which generates feasible production plans within seconds of computation time. Potential readership includes scholars of supply chain management and production planning, interested students in these areas as well as practitioners involved in production planning.
Download or read book Capacitated Lot Sizing Problems in Process Industries written by Ravi Ramya and published by Springer. This book was released on 2019-01-04 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the Capacitated Lot Sizing Problem (CLSP) in process industries. In almost all process industries, there are situations where products have short/long setup times, and the setup of the product and its subsequent production are carried over, across consecutive periods. The setup of a product is carried over across more than one successive period in the case of products having long setup times. A product having short setup has its setup time less than the capacity of the period in which it is setup. The setup is immediately followed by its production of the product and it may also be carried over, across successive time period(s). Many process industries require production of a product to occur immediately after its setup (without the presence of idle time between the setup and production of the product), and they also require the product to be continuously produced without any interruption. This book considers a single-machine, single-level and multiple-item CLSP problem. This book introduces the Capacitated Lot Sizing Problem with Production Carryover and Setup Crossover across periods (CLSP-PCSC). Mathematical models are proposed which are all encompassing that they can handle continuous manufacturing (as in process industries), and also situations where the setup costs and holding costs are product dependent and time independent/time dependent, with possible backorders, and with other appropriate adaptations. Comprehensive heuristics are proposed based on these mathematical models to solve the CLSP-PCSC. The performance of the proposed models and heuristics are evaluated using problem instances of various sizes. This book also covers mathematical models developed for the Capacitated Lot Sizing Problem with Production Carryover and Setup Crossover across periods, and with Sequence-Dependent Setup Times and Setup Costs (CLSP-SD-PCSC). These models allow the presence of backorders and also address real-life situations present in process industries such as production of a product starting immediately after its setup and its uninterrupted production carryover across periods, along with the presence of short/long setup times. Heuristics proposed for the CLSP-PCSC can be extended to address the CLSP problem with sequence dependent setup costs and setup times. All the models and heuristics proposed in this book address some real-life considerations present in process industries.
Download or read book Applications of Evolutionary Computation written by Cecilia Di Chio and published by Springer Science & Business Media. This book was released on 2010-03-25 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Workshops on the Applications of Evolutionary Computation, EvoApplications 2010, held in Istanbul, Turkey, in April 2010 colocated with the Evo* 2010 events. Thanks to the large number of submissions received, the proceedings for EvoApplications 2010 are divided across two volumes (LNCS 6024 and 6025). The present volume contains contributions for EvoCOMNET, EvoENVIRONMENT, EvoFIN, EvoMUSART, and EvoTRANSLOG. The 47 revised full papers presented were carefully reviewed and selected from a total of 86 submissions. This volume presents a careful selection of relevant EC examples combined with a thorough examination of the techniques used in EC. The papers in the volume illustrate the current state of the art in the application of EC and should help and inspire researchers and professionals to develop efficient EC methods for design and problem solving.
Download or read book Logistik Management written by Stefan Voß and published by Springer Science & Business Media. This book was released on 2009-08-21 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Globalisierung und Virtualisierung von Geschäftsbeziehungen vergrößert die Bedeutung und die Komplexität logistischer Herausforderungen. Das Management logistischer Netzwerke wird zu einem wesentlichen Wettbewerbsfaktor für Unternehmen. Das Buch wie die gleichnamige Tagung (September 2009) haben zum Ziel, den internationalen Gedankenaustausch und die Diskussion zwischen Wissenschaft und Praxis gezielt zu fördern, damit Strategien, Methoden und Werkzeuge entwickelt werden können, die es ermöglichen, den wachsenden Anforderungen gerecht zu werden.
Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.
Download or read book A Novel Solution Approach to Capacitated Lot Sizing Problems with Setup Times and Setup Carry Over written by Hakan Fatih Karagul and published by . This book was released on 2012 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Modeling of Mechanical Systems II written by Mnaouar Chouchane and published by Springer. This book was released on 2015-03-24 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 6th International Congress on Design and Modeling of Mechanical Systems (CMSM’2015), held in Hammamet, Tunisia, from the 23rd to the 25th of March 2015. It reports on both recent research findings and innovative industrial applications in the fields of mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, and design and manufacturing of mechanical systems. Since its first edition in 2005, the CMSM Congress has been held every two years with the aim of bringing together specialists from universities and industry to present the state-of-the-art in research and applications, discuss the most recent findings and exchange and develop expertise in the field of design and modeling of mechanical systems. The CMSM Congress is jointly organized by three Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir; the Mechanical Laboratory of Sousse, part of the National Engineering School of Sousse; and the Mechanical, Modeling and Manufacturing Laboratory at the National Engineering School of Sfax.
Download or read book Capacitated Multi Item Multi Echelon Lot Sizing with Setup Carry Over Under Uncertain Demand written by Manuel Schlenkrich and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study focuses on the lot sizing problem with setup carry-over in multi-item multi-echelon capacitated production systems under uncertain customer demand. We investigate budget-uncertainty robust optimization and scenario-based stochastic programming, to address the uncertainty in customer demand. Three modeling strategies are proposed within the stochastic programming framework, exploring different decision stages for setup carry-over and production quantities. In our examination of the robust model, we explore different robustness parameters, specifically the uncertainty budget and the variation interval. Extensive numerical experiments are conducted to compare the average and worst case performance of the models on out-of-sample scenarios. We fit conditional inference trees to the evaluation results and predict the suitability of robust and stochastic approaches for the test instances based on their problem characteristics. The findings provide valuable managerial insights, enabling decision makers to estimate the most appropriate modeling approach for their lot sizing problem at hand. Moreover they highlight the importance of choosing appropriate robustness parameters for robust optimization models and emphasize the value of flexibility in carry-over and quantity decisions. Lastly, we analyze the production plans obtained by lot sizing models with different levels of flexibility according to their solution structures and investigate the resulting changes in setup patterns.
Download or read book Fix and optimize Heuristic and MP based Approaches for Capacitated Lot Sizing Problem with Setup Carryover Setup Splitting and Backlogging written by Cheng-Lung Chen and published by . This book was released on 2015 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, a single-level, multi-item capacitated lot sizing problem with setup carryover, setup splitting and backlogging is investigated. This problem is typically used in the tactical and operational planning stage, determining the optimal production quantities and sequencing for all the products in the planning horizon. Although the capacitated lot sizing problems have been investigated with many different features from researchers, the simultaneous consideration of setup carryover and setup splitting is relatively new. This consideration is beneficial to reduce costs and produce feasible production schedule. Setup carryover allows the production setup to be continued between two adjacent periods without incurring extra setup costs and setup times. Setup splitting permits the setup to be partially finished in one period and continued in the next period, utilizing the capacity more efficiently and remove infeasibility of production schedule.The main approaches are that first the simple plant location formulation is adopted to reformulate the original model. Furthermore, an extended formulation by redefining the idle period constraints is developed to make the formulation tighter. Then for the purpose of evaluating the solution quality from heuristic, three types of valid inequalities are added to the model. A fix-and-optimize heuristic with two-stage product decomposition and period decomposition strategies is proposed to solve the formulation. This generic heuristic solves a small portion of binary variables and all the continuous variables rapidly in each subproblem. In addition, the case with demand backlogging is also incorporated to demonstrate that making additional assumptions to the basic formulation does not require to completely altering the heuristic.The contribution of this thesis includes several aspects: the computational results show the capability, flexibility and effectiveness of the approaches. The average optimality gap is 6% for data without backlogging and 8% for data with backlogging, respectively. In addition, when backlogging is not allowed, the performance of fix-and-optimize heuristic is stable regardless of period length. This gives advantage of using such approach to plan longer production schedule. Furthermore, the performance of the proposed solution approaches is analyzed so that later research on similar topics could compare the result with different solution strategies.
Download or read book Variants of Evolutionary Algorithms for Real World Applications written by Raymond Chiong and published by Springer Science & Business Media. This book was released on 2011-11-13 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evolutionary Algorithms (EAs) are population-based, stochastic search algorithms that mimic natural evolution. Due to their ability to find excellent solutions for conventionally hard and dynamic problems within acceptable time, EAs have attracted interest from many researchers and practitioners in recent years. This book “Variants of Evolutionary Algorithms for Real-World Applications” aims to promote the practitioner’s view on EAs by providing a comprehensive discussion of how EAs can be adapted to the requirements of various applications in the real-world domains. It comprises 14 chapters, including an introductory chapter re-visiting the fundamental question of what an EA is and other chapters addressing a range of real-world problems such as production process planning, inventory system and supply chain network optimisation, task-based jobs assignment, planning for CNC-based work piece construction, mechanical/ship design tasks that involve runtime-intense simulations, data mining for the prediction of soil properties, automated tissue classification for MRI images, and database query optimisation, among others. These chapters demonstrate how different types of problems can be successfully solved using variants of EAs and how the solution approaches are constructed, in a way that can be understood and reproduced with little prior knowledge on optimisation.
Download or read book Advances in Production Management Systems Sustainable Production and Service Supply Chains written by Vittal Prabhu and published by Springer. This book was released on 2013-09-05 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 414 and 415 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2013, held in University Park, PA, USA, in September 2013. The 133 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 4 parts: sustainable production, sustainable supply chains, sustainable services, and ICT and emerging technologies.
Download or read book Metaheuristics written by Luca Di Gaspero and published by Springer Nature. This book was released on 2023-02-22 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th International Conference on Metaheuristics, MIC 2022, held in Syracuse, Italy, in July 2022. The 48 full papers together with 17 short papers presented were carefully reviewed and selected from 72 submissions. The papers detail metaheuristic techniques. Chapter “Evaluating the Effects of Chaos in Variable Neighbourhood Search” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Time Continuity in Discrete Time Models written by Christopher Suerie and published by Springer Science & Business Media. This book was released on 2006-01-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production planning problems containing special characteristics from process industries are addressed in this book. The main subject is the development of mathematical programming models that allow to model production plans which are not disrupted by discretization of time. However, discrete time models are used as a basis and are subsequently enhanced to include aspects of time continuity. Their integration is achieved by different building blocks which may be combined freely according to the specific planning situation at hand. The primary area of application of these kinds of models are process industries.
Download or read book Lot Sizing and Scheduling for Flexible Flow Lines written by Daniel Quadt and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book considers the lot-sizing and scheduling problem for flexible flow line production facilities. Flexible flow lines are flow lines with parallel machines on some or all production stages. They can be found in a vast number of industries. A three-phased solution approach is presented that solves the integrated lot-sizing and scheduling problem in a hierarchical manner. The approach is able to handle several important features relevant in industrial practice, such as back-orders and setup carry-over. The developed solution procedures solve practically sized problems in a relatively short amount of time. One of the procedures is based on a novel mixed integer programming (MIP) model, which employs integer variables instead of binary variables. This makes it possible to find (near-)optimal solutions using standard algorithms such as CPLEX. Another procedure uses two nested Genetic Algorithms. An application of the framework in the semiconductor industry is given.
Download or read book Multi Stage Production Planning and Inventory Control written by Sven Axsäter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper treats a two-echelon inventory system. The higher echelon is a single location reffered to as the depot, which places orders for supply of a single com modity. The lower echelon consists of several points, called the retailers, which are supplied by shipments from the depot, and at which random demands for the item occur. Stocks are reviewed and decisions are made periodically. Orders and/or shipments may each require a fixed lead time before reaching their respective desti nations. Section II gives a short literature review of distribution research. Section III introduces the multi-echelon distribution system together with the underlying as sumptions and gives a description of how this problem can be viewed as a Markovian Decision Process. Section IV discusses the concept of cost modifications in a distribution context. Section V presents the test-examples together with their optimal solutions and also gives the characteristic properties of these optimal solutions. These properties then will be used in section VI to give adapted ver sions of various heuristics which were used in assembly experiments previously and which will be tested against the test-examples.
Download or read book A Note on Capacitated Lot Sizing with Setup Carry over written by D. Briskorn and published by . This book was released on 2004 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reverse Logistics written by Rommert Dekker and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses decision making in reverse logistics, which concerns the integration of used and obsolete products back into the supply chain as valuable resources. It covers a wide range of aspects, related to distribution, production and inventory management, and supply chain management. For each topic, it highlights key managerial issues in real-life examples and explains which quantitative models are available for addressing them. By treating a broad range of issues in a unified way, the book offers the reader a comprehensive view on the field of reverse logistics.