Download or read book Multi Gigahertz Nyquist Analog to Digital Converters written by Athanasios T. Ramkaj and published by Springer Nature. This book was released on 2023-01-12 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes innovative circuit, architecture, and system solutions in deep-scaled CMOS and FinFET technologies, which address the challenges in maximizing the accuracy*speed/power of multi-GHz sample rate and bandwidth Analog-to-Digital Converters (ADC)s. A new holistic approach is introduced that first identifies the major error sources of a converter’ building blocks, and quantitatively analyzes their impact on the overall performance, establishing the fundamental circuit-imposed accuracy – speed – power limits. The analysis extends to the architecture level, by introducing a mathematical framework to estimate and compare the accuracy – speed – power limits of several ADC architectures and variants. To gain system-level insight, time-interleaving is covered in detail, and a framework is also introduced to compare key metrics of interleaver architectures quantitatively. The impact of technology is also considered by adding process effects from several deep-scaled CMOS technologies. The validity of the introduced analytical approach and the feasibility of the proposed concepts are demonstrated by four silicon prototype Integrated Circuits (IC)s, realized in ultra-deep-scaled CMOS and FinFET technologies. Introduces a new, holistic approach for the analysis and design of high-performance ADCs in deep-scaled CMOS technologies, from theoretical concepts to silicon bring-up and verification; Describes novel methods and techniques to push the accuracy – speed – power boundaries of multi-GHz ADCs, analyzing core and peripheral circuits’ trade-offs across the entire ADC chain; Supports the introduced analysis and design concepts by four state-of-the-art silicon prototype ICs, implemented in 28nm bulk CMOS and 16nm FinFET technologies; Provides a useful reference and a valuable tool for beginners as well as experienced ADC design engineers.

Download or read book Nyquist AD Converters Sensor Interfaces and Robustness written by Arthur H.M. van Roermund and published by Springer Science & Business Media. This book was released on 2012-11-26 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 presentations during the 21st workshop on Advances in Analog Circuit Design. Expert designers provide readers with information about a variety of topics at the frontier of analog circuit design, including Nyquist analog-to-digital converters, capacitive sensor interfaces, reliability, variability, and connectivity. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book Power Efficient High Speed Parallel Sampling ADCs for Broadband Multi carrier Systems written by Yu Lin and published by Springer. This book was released on 2015-05-07 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the challenges of designing high performance analog-to-digital converters (ADCs) based on the “smart data converters” concept, which implies context awareness, on-chip intelligence and adaptation. Readers will learn to exploit various information either a-priori or a-posteriori (obtained from devices, signals, applications or the ambient situations, etc.) for circuit and architecture optimization during the design phase or adaptation during operation, to enhance data converters performance, flexibility, robustness and power-efficiency. The authors focus on exploiting the a-priori knowledge of the system/application to develop enhancement techniques for ADCs, with particular emphasis on improving the power efficiency of high-speed and high-resolution ADCs for broadband multi-carrier systems.

Download or read book High Speed and Wide Bandwidth Delta Sigma ADCs written by Muhammed Bolatkale and published by Springer. This book was released on 2014-05-27 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes techniques for realizing wide bandwidth (125MHz) over-sampled analog-to-digital converters (ADCs) in nano meter-CMOS processes. The authors offer a clear and complete picture of system level challenges and practical design solutions in high-speed Delta-Sigma modulators. Readers will be enabled to implement ADCs as continuous-time delta-sigma (CT∆Σ) modulators, offering simple resistive inputs, which do not require the use of power-hungry input buffers, as well as offering inherent anti-aliasing, which simplifies system integration. The authors focus on the design of high speed and wide-bandwidth ΔΣMs that make a step in bandwidth range which was previously only possible with Nyquist converters. More specifically, this book describes the stability, power efficiency and linearity limits of ΔΣMs, aiming at a GHz sampling frequency.

Download or read book Integrated Analog To Digital and Digital To Analog Converters written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog-to-digital (A/D) and digital-to-analog (D/A) converters provide the link between the analog world of transducers and the digital world of signal processing, computing and other digital data collection or data processing systems. Several types of converters have been designed, each using the best available technology at a given time for a given application. For example, high-performance bipolar and MOS technologies have resulted in the design of high-resolution or high-speed converters with applications in digital audio and video systems. In addition, high-speed bipolar technologies enable conversion speeds to reach the gigaHertz range and thus have applications in HDTV and digital oscilloscopes. Integrated Analog-to-Digital and Digital-to-Analog Converters describes in depth the theory behind and the practical design of these circuits. It describes the different techniques to improve the accuracy in high-resolution A/D and D/A converters and also special techniques to reduce the number of elements in high-speed A/D converters by repetitive use of comparators. Integrated Analog-to-Digital and Digital-to-Analog Converters is the most comprehensive book available on the subject. Starting from the basic elements of theory necessary for a complete understanding of the design of A/D and D/A converters, this book describes the design of high-speed A/D converters, high-accuracy D/A and A/D converters, sample-and-hold amplifiers, voltage and current reference sources, noise-shaping coding and sigma-delta converters. Integrated Analog-to-Digital and Digital-to-Analog Converters contains a comprehensive bibliography and index and also includes a complete set of problems. This book is ideal for use in an advanced course on the subject and is an essential reference for researchers and practicing engineers.

Download or read book Advanced Data Converters written by Gabriele Manganaro and published by Cambridge University Press. This book was released on 2011-11-17 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Need to get up to speed quickly on the latest advances in high performance data converters? Want help choosing the best architecture for your application? With everything you need to know about the key new converter architectures, this guide is for you. It presents basic principles, circuit and system design techniques and associated trade-offs, doing away with lengthy mathematical proofs and providing intuitive descriptions upfront. Everything from time-to-digital converters to comparator-based/zero-crossing ADCs is covered and each topic is introduced with a short summary of the essential basics. Practical examples describing actual chips, along with extensive comparison between architectural or circuit options, ease architecture selection and help you cut design time and engineering risk. Trade-offs, advantages and disadvantages of each option are put into perspective with a discussion of future trends, showing where this field is heading, what is driving it and what the most important unanswered questions are.

Download or read book Analog to Digital Conversion written by Marcel J.M. Pelgrom and published by Springer Science & Business Media. This book was released on 2012-12-12 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is appropriate for use in graduate-level curricula in analog to digital conversion, as well as for practicing engineers in need of a state-of-the-art reference on data converters. It discusses various analog-to-digital conversion principles, including sampling, quantization, reference generation, nyquist architectures and sigma-delta modulation. This book presents an overview of the state-of-the-art in this field and focuses on issues of optimizing accuracy and speed, while reducing the power level. This new, second edition emphasizes novel calibration concepts, the specific requirements of new systems, the consequences of 22-nm technology and the need for a more statistical approach to accuracy. Pedagogical enhancements to this edition include more than twice the exercises available in the first edition, solved examples to introduce all key, new concepts and warnings, remarks and hints, from a practitioner’s perspective, wherever appropriate. Considerable background information and practical tips, from designing a PCB, to lay-out aspects, to trade-offs on system level, complement the discussion of basic principles, making this book a valuable reference for the experienced engineer.

Download or read book Low Power High Resolution Analog to Digital Converters written by Amir Zjajo and published by Springer Science & Business Media. This book was released on 2010-10-29 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the fast advancement of CMOS fabrication technology, more and more signal-processing functions are implemented in the digital domain for a lower cost, lower power consumption, higher yield, and higher re-configurability. This has recently generated a great demand for low-power, low-voltage A/D converters that can be realized in a mainstream deep-submicron CMOS technology. However, the discrepancies between lithography wavelengths and circuit feature sizes are increasing. Lower power supply voltages significantly reduce noise margins and increase variations in process, device and design parameters. Consequently, it is steadily more difficult to control the fabrication process precisely enough to maintain uniformity. The inherent randomness of materials used in fabrication at nanoscopic scales means that performance will be increasingly variable, not only from die-to-die but also within each individual die. Parametric variability will be compounded by degradation in nanoscale integrated circuits resulting in instability of parameters over time, eventually leading to the development of faults. Process variation cannot be solved by improving manufacturing tolerances; variability must be reduced by new device technology or managed by design in order for scaling to continue. Similarly, within-die performance variation also imposes new challenges for test methods. In an attempt to address these issues, Low-Power High-Resolution Analog-to-Digital Converters specifically focus on: i) improving the power efficiency for the high-speed, and low spurious spectral A/D conversion performance by exploring the potential of low-voltage analog design and calibration techniques, respectively, and ii) development of circuit techniques and algorithms to enhance testing and debugging potential to detect errors dynamically, to isolate and confine faults, and to recover errors continuously. The feasibility of the described methods has been verified by measurements from the silicon prototypes fabricated in standard 180nm, 90nm and 65nm CMOS technology.

Download or read book Calibration Techniques in Nyquist A D Converters written by Hendrik van der Ploeg and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses different A/D-converter architectures with an emphasis on the maximum achievable power efficiency. It also provides an accessible overview of the state-of-the art in calibration techniques for Nyquist A/D converters. The calibration techniques presented are applicable to other analog-to-digital systems, such as those applied in integrated receivers. They allow implementation without introducing a speed or power penalty.

Download or read book Incremental Data Converters for Sensor Interfaces written by Chia-Hung Chen and published by John Wiley & Sons. This book was released on 2023-11-03 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive resource discussing operating principles, available architectures, and design of micropower incremental analog-to-digital converters (IADCs) Incremental Data Converters for Sensor Interfaces describes the motivation for using incremental analog-to-digital converters (IADCs), including the theoretical foundations of their operation, the trade-offs in their use, and the practical issues in the circuit analysis and design of IADCs. The text covers core foundational knowledge such as the key algorithms used, circuits for single-stage and multi-stage IADCs, the design of the digital post filters for single- and multi-stage IADCs, IADC applications in measurement and instrumentation, medicine, imagers, and IoT, and comparison of delta-sigma (D-S) and incremental ADCs (IADCs) in terms of accuracy, latency, and multiplexed operation. To aid in reader comprehension and serve as an excellent classroom learning resource, Incremental Data Converters for Sensor Interfaces includes in-text problems and homework for graduate studies, along with helpful computer codes in MATLAB and Simulink. Additional topics covered in Incremental Data Converters for Sensor Interfaces include: Sensors and sensor interfaces, mixed-mode (analog–digital) communication and consumer signal chains, and ADC algorithms Quantization errors vs. quantization noise, and performance parameters and figures of merit, including resolution, linearity, accuracy, bandwidth, latency, and power dissipation Nyquist-rate and oversampling data converters, noise-shaping ADCs, and basic architectures for IADCs, including single- and multi-stage designs and discrete vs. continuous-time operation Loop filter design, D/A converter design, dynamic element matching and digital calibration, and quantizer design With comprehensive coverage of foundational knowledge surrounding the subject, various real-world examples, and helpful learning aids, Incremental Data Converters for Sensor Interfaces is an essential resource for graduate students in electronics programs, along with industrial circuit design professionals.

Download or read book Time interleaved Analog to Digital Converters written by Simon Louwsma and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-interleaved Analog-to-Digital Converters describes the research performed on low-power time-interleaved ADCs. A detailed theoretical analysis is made of the time-interleaved Track & Hold, since it must be capable of handling signals in the GHz range with little distortion, and minimal power consumption. Timing calibration is not attractive, therefore design techniques are presented which do not require timing calibration. The design of power efficient sub-ADCs is addressed with a theoretical analysis of a successive approximation converter and a pipeline converter. It turns out that the first can consume about 10 times less power than the latter, and this conclusion is supported by literature. Time-interleaved Analog-to-Digital Converters describes the design of a high performance time-interleaved ADC, with much attention for practical design aspects, aiming at both industry and research. Measurements show best-inclass performance with a sample-rate of 1.8 GS/s, 7.9 ENOBs and a power efficiency of 1 pJ/conversion-step.

Download or read book A Josephson Junction Analog to Digital Converter with Multi gigahertz Bandwidth written by David Andrew Petersen and published by . This book was released on 1989 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS Single Chip Fast Frequency Hopping Synthesizers for Wireless Multi Gigahertz Applications written by Taoufik Bourdi and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors outline detailed design methodology for fast frequency hopping synthesizers for RF and wireless communications applications. There is great emphasis on fractional-N delta-sigma based phase locked loops from specifications, system analysis and architecture planning to circuit design and silicon implementation. The developed techniques in the book can help in designing very low noise, high speed fractional-N frequency synthesizers.

Download or read book High Speed Analog to Digital Conversion written by Michael J. Demler and published by Elsevier. This book was released on 2012-12-02 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the theory and applications of high-speed analog-to-digital conversion. An analog-to-digital converter takes real-world inputs (such as visual images, temperature readings, and rates of speed) and transforms them into digital form for processing by computer. This book discusses the design and uses of such circuits, with particular emphasis on improving the speed of the conversion process and the accuracy of its output--how well the output is a corresponding digital representation of the output*b1input signal. As computers become increasingly interfaced to the outside world, "ADC" techniques will become ever more important.

Download or read book Superconducting Flash type Analog to digital Converters with Multi gigahertz Performance written by Howard Cam Luong and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reference Free CMOS Pipeline Analog to Digital Converters written by Michael Figueiredo and published by Springer Science & Business Media. This book was released on 2012-08-24 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows that digitally assisted analog to digital converters are not the only way to cope with poor analog performance caused by technology scaling. It describes various analog design techniques that enhance the area and power efficiency without employing any type of digital calibration circuitry. These techniques consist of self-biasing for PVT enhancement, inverter-based design for improved speed/power ratio, gain-of-two obtained by voltage sum instead of charge redistribution, and current-mode reference shifting instead of voltage reference shifting. Together, these techniques allow enhancing the area and power efficiency of the main building blocks of a multiplying digital-to-analog converter (MDAC) based stage, namely, the flash quantizer, the amplifier, and the switched capacitor network of the MDAC. Complementing the theoretical analyses of the various techniques, a power efficient operational transconductance amplifier is implemented and experimentally characterized. Furthermore, a medium-low resolution reference-free high-speed time-interleaved pipeline ADC employing all mentioned design techniques and circuits is presented, implemented and experimentally characterized. This ADC is said to be reference-free because it precludes any reference voltage, therefore saving power and area, as reference circuits are not necessary. Experimental results demonstrate the potential of the techniques which enabled the implementation of area and power efficient circuits.

Download or read book CMOS Telecom Data Converters written by Angel Rodríguez-Vázquez and published by Springer Science & Business Media. This book was released on 2004-01-31 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Telecom Data Converters compiles the latest achievements regarding the design of high-speed and high-resolution data converters in deep submicron CMOS technologies. The four types of analog-to-digital converter architectures commonly found in this arena are covered, namely sigma-delta, pipeline, folding/interpolating and flash. For all these types, latest achievements regarding the solution of critical architectural and circuital issues are presented, and illustrated through IC prototypes with measured state-of-the-art performances. Some of these prototypes are conceived to be employed at the chipset of newest generation wireline modems (ADSL and ADSL+). Others are intended for wireless transceivers. Besides analog-to-digital converters, the book also covers other functions needed for communication systems, such as digital-to-analog converters, analog filters, programmable gain amplifiers, digital filters, and line drivers.