Download or read book Multi component VSP Analysis for Applied Seismic Anisotropy written by Colin MacBeth and published by Elsevier. This book was released on 2002 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vertical seismic profile, acquired with an array of 3C receivers and either a single source or several arranged in a multi-component configuration, provides an ideal high fidelity calibration tool for seismic projects involved in the application of seismic anisotropy. This book catalogues the majority of specialized tools necessary to work with P-P, P-S and S-S data from such VSP surveys at the acquisition design, processing and interpretation stages. In particular, it discusses 3C, 4C, 6C and 9C VSP, marine and land surveys with near and multiple offsets (walkways), azimuths (walkarounds) or a combination of both. These are considered for TIH or TIV flavours of seismic anisotropy arising from cracks, fractures, sedimentary layering, and shales. The anisotropic adaptation of familiar seismic methods for velocity analysis and inversion, reflected amplitude interpretation, are given together with more multi-component specific algorithms based upon the principles dictated by the vector convolutional model. Thus, multi-component methods are described that provide tests and compensation for source or receiver vector fidelity, tool rotation correction, layer stripping, near-surface correction, wavefield separation, and the Alford rotation with its variants. The work will be of interest to geophysicists involved in research or the application of seismic anisotropy using multi-component seismic.
Download or read book Seismology of Azimuthally Anisotropic Media and Seismic Fracture Characterization written by I. D. T︠S︡vankin and published by SEG Books. This book was released on 2011 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an analysis of seismic signatures for azimuthally anisotropic media and shows anisotropic inversion/processing methods for wide-azimuth reflection data and VSP surveys. The focus is kinematic parameter-estimation techniques; the prestack amplitudes section includes AVO and attenuation coefficients; field examples are included.
Download or read book Seismic Signatures and Analysis of Reflection Data in Anisotropic Media written by Ilya Tsvankin and published by SEG Books. This book was released on 2012 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides essential background on anisotropic wave propagation, introduces efficient notation for transversely isotropic (TI) and orthorhombic media, and identifies the key anisotropy parameters for imaging and amplitude analysis. Particular attention is given to moveout analysis and P-wave time-domain processing for VTI and TTI.
Download or read book Seismic Signatures and Analysis of Reflection Data in Anisotropic Media written by I. Tsvankin and published by Elsevier. This book was released on 2001-03-02 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the breakthrough in the last decade in identifying the key parameters for time and depth imaging in anisotropic media and developing practical methodologies for estimating them from seismic data, this title primarily focuses on the far reaching exploration benefits of anisotropic processing.This volume provides the first comprehensive description of reflection seismic signatures and processing methods in anisotropic media. It identifies the key parameters for time and depth imaging in transversely isotropic media and describes practical methodologies for estimating them from seismic data. Also, it contains a thorough discussion of the important issues of uniqueness and stability of seismic velocity analysis in the presence of anisotropy. The book contains a complete description of anisotropic imaging methods, from the theoretical background to algorithms to implementation issues. Numerous applications to synthetic and field data illustrate the improvements achieved by the anisotropic processing and the possibility of using the estimated anisotropic parameters in lithology discrimination.
Download or read book Anisotropy and Microseismics Theory and Practice written by Vladimir Grechka and published by SEG Books. This book was released on 2020-08-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes readers on a path of discovery of rarely examined wave phenomena and their possible usage. Chapters begin by formulating a question, followed by explanations of what is exciting about it, where the mystery might lie, and what could be the potential value of answering the question.
Download or read book The Relationship Between Damage and Localization written by Helen Lewis and published by Geological Society of London. This book was released on 2007 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The many kinds of porous geomaterials (rocks, soils, concrete, etc.) exhibit a range of responses when undergoing inelastic deformation. In doing so they commonly develop well-ordered fabric elements, forming fractures, shear bands and compaction bands, so creating the planar fabrics that are regarded as localization. Because these induced localization fabrics alter the bulk material properties (such as permeability, acoustic characteristics and strength), it is important to understand how and why localization occurs, and how it relates to its setting. The concept of damage (in several uses) describes both the precursor to localization and the context within which it occurs. A key theme is that geomaterials display a strong material evolution during deformation, revealing a close linkage between the damage and localization processes. This volume assembles perspectives from a number of disciplines, including soil mechanics, rock mechanics, structural geology, seismic anisotropy and reservoir engineering. The papers range from theoretical to observational, and include contributions showing how the deformed geomaterial's emergent bulk characteristics, like permeability and seismic anisotropy, can be predicted.
Download or read book Seismic While Drilling written by F.B Poletto and published by Elsevier. This book was released on 2022-08-13 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic While Drilling: Fundamentals of Drill-Bit Seismic for Exploration, 2nd edition, revised and extended gives a theoretical and practical introduction to seismic while drilling by using drill-bit noise. While drilling seismic methods using surface sources and downhole receivers are also analysed. The goal is to support the exploration geology with geophysical control of drilling, and to build a bridge between geophysicists involved in seismic while drilling, drillers and exploration geologists. This revised and extended edition includes new topics such as novel drilling technology, downhole communication, ground-force drill-bit measurement, SWD seismic interferometry, and fiber optic (DAS). A new section is dedicated to well placement and geosteering. Like the first edition, Seismic While Drilling, 2nd edition also includes examples of SWD analysis and application on real data. - Addresses fundamental knowledge on geophysical principles related to acoustics and seismic waves as well as basic borehole waves and drilling - Includes new technological and methodological developments since the publication of the first edition - Provides new examples for applications in geothermal and analysis of diffractions, offshore marine, and tunnel seismic while drilling (TSWD)
Download or read book Understanding Seismic Anisotropy in Exploration and Exploitation written by Leon Thomsen and published by SEG Books. This book was released on 2002 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: All rock masses are seismically anisotropic, but we generally ignore this in our seismic acquisition, processing, and interpretation. The anisotropy nonetheless does affect our data, in ways that limit the effectiveness with which we can use it, as long as we ignore it. This book, produced for use with the fifth SEG/EAGE Distinguished Instructor Short Course, helps us understand why this inconsistency between reality and practice has been so successful in the past and why it will be less successful in the future as we acquire better seismic data (especially including vector seismic data) and correspondingly higher expectations of it. This book helps us understand how we can modify our practice to more fully realize the potential inherent in our data through algorithms which recognize the fact of seismic anisotropy.
Download or read book Seismic Amplitude written by Rob Simm and published by Cambridge University Press. This book was released on 2014-04-17 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic amplitudes yield key information on lithology and fluid fill, enabling interpretation of reservoir quality and likelihood of hydrocarbon presence. The modern seismic interpreter must be able to deploy a range of sophisticated geophysical techniques, such as seismic inversion, AVO (amplitude variation with offset), and rock physics modelling, as well as integrating information from other geophysical techniques and well data. This accessible, authoritative book provides a complete framework for seismic amplitude interpretation and analysis in a practical manner that allows easy application - independent of any commercial software products. Deriving from the authors' extensive industry expertise and experience of delivering practical courses on the subject, it guides the interpreter through each step, introducing techniques with practical observations and helping to evaluate interpretation confidence. Seismic Amplitude is an invaluable day-to-day tool for graduate students and industry professionals in geology, geophysics, petrophysics, reservoir engineering, and all subsurface disciplines making regular use of seismic data.
Download or read book Seismic Waves and Rays in Elastic Media written by M.A. Slawinski and published by Elsevier. This book was released on 2003-08-04 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book seeks to explore seismic phenomena in elastic media and emphasizes the interdependence of mathematical formulation and physical meaning. The purpose of this title - which is intended for senior undergraduate and graduate students as well as scientists interested in quantitative seismology - is to use aspects of continuum mechanics, wave theory and ray theory to describe phenomena resulting from the propagation of waves.The book is divided into three parts: Elastic continua, Waves and rays, and Variational formulation of rays. In Part I, continuum mechanics are used to describe the material through which seismic waves propagate, and to formulate a system of equations to study the behaviour of such material. In Part II, these equations are used to identify the types of body waves propagating in elastic continua as well as to express their velocities and displacements in terms of the properties of these continua. To solve the equations of motion in anisotropic inhomogeneous continua, the high-frequency approximation is used and establishes the concept of a ray. In Part III, it is shown that in elastic continua a ray is tantamount to a trajectory along which a seismic signal propagates in accordance with the variational principle of stationary travel time.
Download or read book Seismic Amplitude Inversion in Reflection Tomography written by Yanghua Wang and published by Elsevier. This book was released on 2003-02-25 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book of its kind on seismic amplitude inversion in the context of reflection tomography. The aim of the monograph is to advocate the use of ray-amplitude data, separately or jointly with traveltime data, in reflection seismic tomography.The emphasis of seismic exploration is on imaging techniques, so that seismic section can be interpreted directly as a geological section. In contrast it is perhaps ironic that, in decades of industrial seismology, one major aspect of waveform data that potentially is easier to measure and analyse has generally been ignored. That is, the information content of seismic amplitudes. Perhaps the potential complexity has deterred most researchers from a more thorough investigation of the practical use of seismic amplitude data. The author of this volume presents an authoritative and detailed study of amplitude data, as used in conjunction with traveltime data, to provide better constraints on the variation of seismic wave speed in the subsurface.One of the fundamental problems in conventional reflection seismic tomography using only traveltime data is the possible ambiguity between the velocity variation and the reflector depth. The inclusion of amplitude data in the inversion may help to resolve this problem because the amplitudes and traveltimes are sensitive to different features of the subsurface model, and thereby provide more accurate information about the subsurface structure and the velocity distribution. An essential goal of this monograph is to make the amplitude inversion method work with real reflection seismic data.
Download or read book Quantitative Borehole Acoustic Methods written by X.M. Tang and published by Elsevier. This book was released on 2004-01-27 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic logging is a multidisciplinary technology involving basic theory, instrumentation, and data processing/interpretation methodologies. The advancement of the technology now allows for a broad range of measurements to obtain formation properties such as elastic wave velocity and attenuation, formation permeability, and seismic anisotropy that are important for petroleum reservoir exploration. With these advances, it is easier to detect and characterize formation fractures, estimate formation stress field, and locate/estimate petroleum reserves. The technology has evolved from the monopole acoustic logging into the multipole, including dipole, cross-dipole, and even quadrupole, acoustic logging measurements. The measurement process has developed from the conventional wireline logging into the logging-while-drilling stage. For such a fast developing technology with applications that are interesting to readers of different backgrounds, it is necessary to have systematic documentation of the discipline, including the theory, methods, and applications, as well as the technology's past, present, and near future development trends. Quantitative Borehole Acoustic Methods provides such documentation, with emphasis on the development over the past decade. Although considerable effort has been made to provide a thorough basis for the theory and methodology development, emphasis is placed on the applications of the developed methods. The applications are illustrated with field data examples. Many of the acoustic waveform analysis/processing methods described in the book are now widely used in the well logging industry.
Download or read book Waves And Rays In Elastic Continua written by Michael A Slawinski and published by World Scientific Publishing Company. This book was released on 2010-09-09 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book — which is the second, and significantly extended, edition of the textbook originally published by Elsevier Science — emphasizes the interdependence of mathematical formulation and physical meaning in the description of seismic phenomena. Herein, we use aspects of continuum mechanics, wave theory and ray theory to explain phenomena resulting from the propagation of seismic waves.The book is divided into three main sections: Elastic Continua, Waves and Rays and Variational Formulation of Rays. There is also a fourth part, which consists of appendices.In Elastic Continua, we use continuum mechanics to describe the material through which seismic waves propagate, and to formulate a system of equations to study the behaviour of such a material. In Waves and Rays, we use these equations to identify the types of body waves propagating in elastic continua as well as to express their velocities and displacements in terms of the properties of these continua. To solve the equations of motion in anisotropic inhomogeneous continua, we invoke the concept of a ray. In Variational Formulation of Rays, we show that, in elastic continua, a ray is tantamount to a trajectory along which a seismic signal propagates in accordance with the variational principle of stationary traveltime. Consequently, many seismic problems in elastic continua can be conveniently formulated and solved using the calculus of variations. In the Appendices, we describe two mathematical concepts that are used in the book; namely, homogeneity of a function and Legendre's transformation. This section also contains a list of symbols.
Download or read book Nuclear Magnetic Resonance written by K.-J. Dunn and published by Elsevier. This book was released on 2002-01-25 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The applications of nuclear magnetic resonance (NMR) to petroleum exploration and production have become more and more important in recent years. The development of the NMR logging technology and the NMR applications to core analysis and formation evaluation have been very rapid and extensive.The scope of this book covers a wide range of NMR related petrophysical measurements on cores including brief descriptions of recent applications of Magic Angle Spinning (MAS) NMR and the basics of NMR imaging of cores. In the discussion of NMR logging applications various schemes of using NMR logs to obtain necessary information for formation evaluation are outlined, such as irreducible water saturation determination, hydrocarbon typing, oil viscosity estimation, and permeability prediction. The principles of these applications are discussed using schematic diagrams for illustration.A unique aspect of the book is that it provides a detailed account of the basic principles of spin diffusion and relaxation in porous media. Another important area that is covered is the inversion of NMR data into a distribution of amplitudes associated with relaxation time which provides the basic information needed to interpret the NMR measurements obtained from logging.
Download or read book Waves And Rays In Elastic Continua Fourth Edition written by Michael A Slawinski and published by World Scientific. This book was released on 2020-09-24 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismology, as a branch of mathematical physics, is an active subject of both research and development. Its reliance on computational and technological advances continuously motivates the developments of its underlying theory. The fourth edition of Waves and Rays in Elastic Continua responds to these needs.The book is both a research reference and a textbook. Its careful and explanatory style, which includes numerous exercises with detailed solutions, makes it an excellent textbook for the senior undergraduate and graduate courses, as well as for an independent study. Used in its entirety, the book could serve as a sole textbook for a year-long course in quantitative seismology. Its parts, however, are designed to be used independently for shorter courses with different emphases. The book is not limited to quantitive seismology; it can serve as a textbook for courses in mathematical physics or applied mathematics.
Download or read book Basic Theory in Reflection Seismology written by J.K. Costain and published by Elsevier. This book was released on 2004-10-27 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material in this volume provides the basic theory necessary to understand the principles behind imaging the subsurface of the Earth using reflection and refraction seismology. For reflection seismology, the end product is a "record section" from a collection of "wiggly traces" that are recorded in the field from which information about the properties of subsurface structure and rock can be derived. For the most part, the principles of imaging are the same regardless of the depth to the target; the same mathematical background is necessary for targeting a shallow water table as for investigating the base of the earth's continental "crust" at a depth of 30-50 km.
Download or read book Introduction to Petroleum Seismology second edition written by Luc T. Ikelle and published by SEG Books. This book was released on 2018-03-26 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Petroleum Seismology, second edition (SEG Investigations in Geophysics Series No. 12) provides the theoretical and practical foundation for tackling present and future challenges of petroleum seismology especially those related to seismic survey designs, seismic data acquisition, seismic and EM modeling, seismic imaging, microseismicity, and reservoir characterization and monitoring. All of the chapters from the first edition have been improved and/or expanded. In addition, twelve new chapters have been added. These new chapters expand topics which were only alluded to in the first edition: sparsity representation, sparsity and nonlinear optimization, near-simultaneous multiple-shooting acquisition and processing, nonuniform wavefield sampling, automated modeling, elastic-electromagnetic mathematical equivalences, and microseismicity in the context of hydraulic fracturing. Another major modification in this edition is that each chapter contains analytical problems as well as computational problems. These problems include MatLab codes, which may help readers improve their understanding of and intuition about these materials. The comprehensiveness of this book makes it a suitable text for undergraduate and graduate courses that target geophysicists and engineers as well as a guide and reference work for researchers and professionals in academia and in the petroleum industry.
