Download or read book Mullite Formations written by Akshoy Kumar Chakraborty and published by CRC Press. This book was released on 2021-11-30 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mullite is the most important crystalline phase in fired products belonging to the Al2O3–SiO2 mullite system, such as whiteware articles used in daily life (e.g., low- and high-temperature hard porcelain, sanitaryware, and structural clay products). Mullite has attracted increasing interest due to its excellent high-temperature strength and creep resistance, good chemical and thermal stability, low thermal expansion coefficient, and good dielectric properties. Mullitization has been a subject of extensive and controversial investigations. This book comprehensively covers the synthesis and six types of phase transformation of mullite. Part I reviews previous research on the synthesis of mullite gels, advantages and disadvantages of different chemical routes of synthesis, and phase transformation processes. Part II discusses the nature and characterization of spinel and mullite phases and different mechanisms of mullite formation, as conjectured by various researchers. Part III deals with the critical analysis of the spinel and mullite phases and evolution of mullite formation routes. Every chapter is accompanied by detailed diagrams and a comprehensive list of references.
Download or read book Mullite Formations written by Akshoy Kumar Chakraborty and published by . This book was released on 2021-11-30 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively covers the synthesis and six types of phase transformation of mullite. Part 1 reviews previous research on synthesis of mullite gels, advantages and disadvantages of different chemical routes of synthesis, and phase transformation processes.
Download or read book Mullite written by Hartmut Schneider and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book to provide a complete survey -- from the crystallographic fundamentals right up to recent high-tech applications in aerospace technology. Following a general introduction to the topic, the authors go on to cover the crystal chemistry of mullite and related phases, as well as its basic properties, phase equilibria and stability. One whole section is devoted to the synthesis and processing of mullite ceramics, while later ones cover mullite coatings, fibers and matrix composites. For materials scientists, solid state chemists and physicists, crystallographers and mineralogists.
Download or read book National Bureau of Standards Miscellaneous Publication written by and published by . This book was released on 1963 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Miscellaneous Publication National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1934 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Chemistry of Silicates and Other Oxide Systems Vysokotemperaturnaya Khimiya Silikatnykh I Drugikh Okisnykh Sistem B ico otem epat pha X m C ath ix p x O ch ix C ctem written by N. A. Toropov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ever-increasing importance of chemical reactions at high and superhigh temperatures in crystalline, amorphous, and semicrystalline SOlids, as well as the reactions of these solids with gases, prompted the authors of this book to examine critically the literature available in this field and to present a general review of the subject. In this monograph we discuss those chemical and physicochemical points which we consider to be most important for solving a series of problems in the preparation and use of new inorganic materials. We hope that this book will be of interest to the many specialists working on inorganic materials. N. A. Toropov PREFACE Modem technology demands ever more materials with high mechanical strength, heat and chemical re sistance, fire resistance, special electrical properties, particular behavior toward active radiations, etc. The search for such materials requires the study of various chemical compounds, metallic alloys, and other fused in organic systems, especially oxide systems. Materials based on oxides begin to assume increasing importance in many fields of the new technology. In this connection the investigation of oxides and systems consisting of two and more oxides is expanding greatly.
Download or read book Euro Ceramics VIII written by Hasan Mandal and published by Trans Tech Publications Ltd. This book was released on 2004-05-15 with total page 2560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 8th Conference and Exhibition of the European Ceramic Society, Istanbul, Turkey, June 29-July 3, 2003
Download or read book Whitewares and Materials written by William M. Carty and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Phase Transformation of Kaolinite Clay written by Akshoy Kumar Chakraborty and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book depicts comprehensive studies on thermal decomposition of Kaolinite by different physico-chemical methods carried out by various scientists in last 100 years and results of the studies conducted by author in past 33 years. It also provides a critical analysis of different views on Kaolinite–Mullite reaction series, characterization of controversial spinel phase in Kaolinite–Mullite reaction series and explanation of DTA events of Kaolinite. The book helps both researchers and students to realise the new mechanism of transformation of Kaolinite to Mullite. The new reaction processes discussed in the book also help ceramic experts to synthesize Mullite grains in commercial way for production of Mullite porcelain and Mullite refractory.
Download or read book Advanced X ray Techniques in Research and Industry written by Ashok Kumar Singh and published by IOS Press. This book was released on 2005 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the seminar held in Defence Metallurgical Research Laboratory, Hyderabad India in 2003.
Download or read book High Temperature Oxides written by Allen Alper and published by Elsevier. This book was released on 2012-12-02 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Oxides: Refractory Glasses, Glass-Ceramics, and Ceramics is the fourth part of a series of four books on high temperature oxides. This book is divided into nine chapters that cover refractory glasses and glass-ceramics, alumina-containing compounds, zinc oxide, tungsten oxide compounds, and slip-casting of ceramics. The first chapters of the book deal with the fabrication, characterization, and application of refractory glasses and glass-ceramics. These topics are followed by considerable chapters on the preparation, properties, and application of mullite, oxide spinels, oxides containing tungsten, and zinc oxide. A chapter on slip-cast ceramics and refractories approaches slip-casting from a scientific point of view of this complex process. Included also in this text are the advances in sintered and fusion-cast glass-contact refractories, such as zirconium oxide-silica-alumina. The concluding chapter deals with the quantitative calculations of the magnitudes of the physical properties of glasses and the variation of these properties with temperature. This book is of great value to ceramic and glass researchers and scientists.
Download or read book 18th Annual Conference on Composites and Advanced Ceramic Materials B Volume 15 Issue 5 written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book TMS 2011 140th Annual Meeting and Exhibition Materials Fabrication Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the most up-to-date information on the state of Materials Fabrication, Properties, Characterization, and Modeling. It's a great mix of practical applied technology and hard science, which is of invaluable benefit to the global industry.
Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites VII Volume 33 Issue 2 written by Dileep Singh and published by John Wiley & Sons. This book was released on 2012-11-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of 33 papers deals with mechanical behaviors associated with systems ranging from diamond reinforced silicon carbide to rare earth pyrosilicates. Presented at The Mechanical Behavior and Performance of Ceramics & Composites Symposium in January 2012 during the 36th International Conference on Advanced Ceramics and Composites (ICACC), it offers researchers from around the world the opportunity to explore new and emerging issues in all aspects of the field.
Download or read book High Performance Structures and Materials Engineering written by Mark Zhou and published by Trans Tech Publications Ltd. This book was released on 2011-03-30 with total page 1951 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed paper from 2011 First International Conference on High Performance Structures and Materials Engineering (ICHPSM 2011) in May 5-6, Beijing, China, 2011
Download or read book Ceramic Materials for Electronics written by Relva C. Buchanan and published by CRC Press. This book was released on 2018-10-08 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Edition of Ceramic Materials for Electronics studies a wide range of ceramic materials, including insulators, conductors, piezoelectrics, and ferroelectrics, through detailed discussion of their properties, characterization, fabrication, and applications in electronics. The author summarizes the latest trends and advancements in the field, and explores important topics such as ceramic thin film, functional device technology, and thick film technology. Edited by a leading expert on the subject, this new edition includes more than 150 pages of new information; restructured reference materials, figures, and tables; as well as additional device application-oriented segments.
Download or read book Effect of Fly Ash on the Physical Properties of Illite Based Ceramics written by Tomáš Húlan and published by Materials Research Forum LLC. This book was released on 2022-10-05 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book investigates the potential use of fly ash as a secondary raw material. Emphasis is placed on the effects of the admixture of power plant fly ash from lignite combustion on the properties of ceramic bodies in the building industry. Keywords: Illite-Based Ceramics, Power Plant Fly Ash, Drying Process, Particle Size, Particle Morphology, Heavy Metals, Mineral Compositions, Microstructure, Differential Thermal Analysis, XRD Analysis, Bulk Density, Water Absorption, Porosity, Pore Distribution, Thermal Diffusivity, Internal Friction, Hardness, Mechanical Strength, Flexural Strength.
