Download or read book MTBE Production from Crude C4s Cost Analysis MTBE E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl tert-Butyl Ether (MTBE) production from a crude C4s raffinate-1 stream and methanol The process examined is similar to UOP's Ethermax process for isobutylene etherification. In this process the etherification reaction is conducted in two steps, the first step being a conventional reactor and the second a reactive distillation column. Other established commercial etherification processes with similar configuration, like CBI's CDMTBE, Axens' MTBE Process and Evonik's MTBE Process may as well be represented by the economic analysis presented in this report. This report was developed based essentially on the following reference(s): Bertau, M., et al., 2014, Methanol: The Basic Chemical and Energy Feedstock of the Future, 1st edition Keywords: Etherification Reaction, Fluid Catalytic Cracking, Crude C4, Steam Cracking C4

Download or read book Isobutylene Production from Crude C4s Cost Analysis Isobutylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Isobutylene production from a crude C4s stream using an extraction process. The process examined is similar to Total Isobutylene Acid Extraction process. In this process sulfuric acid reacts with isobutylene to form an alcohol that is separated from the crude C4 raw material and through a dehydration step, isobutylene is recovered as the product. This report was developed based essentially on the following reference(s): Keywords: Extractive Distillation, Crude C4s

Download or read book Biodiesel Production from Soybean Oil Cost Analysis Biodiesel E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Biodiesel production from soybean oil. The process examined is a typical alkaline catalysis process. In this process, crude glycerol is generated as by-product. This report was developed based essentially on the following reference(s): (1) US Patent 8758457, issued to Petrobras in 2014 (2) US Patent 20050204612, issued to Connemann in 2005 Keywords: Fatty Acid Methyl Ester, FAME, Glycerin, Transesterification, Refined Vegetable Oil

Download or read book Renewable Diesel from Soybean Oil Cost Analysis Diesel E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Renewable Diesel production from soybean oil. The process examined is a typical hydroprocessing process. In this process, the Renewable Diesel plant is integrated with a plant for hydrogen production from natural gas. The process generates naphtha as by-product. This report was developed based essentially on the following reference(s): (1) US Patent 8822744, issued to ExxonMobil in 2014 (2) EP Patent 1693432, issued to Petrobras in 2009 Keywords: Fixed Bed, Hydrogenation, Green Diesel, Hydrotreatment, Refined Vegetable Oil

Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. Provides balanced coverage of fundamental and operational topics Includes spreadsheets and process simulators for showing trends and simulation case studies Relates processing to planning and management to give an integrated picture of refining

Download or read book Process Equipment and Plant Design written by Subhabrata Ray and published by Elsevier. This book was released on 2020-05-29 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Equipment and Plant Design: Principles and Practices takes a holistic approach towards process design in the chemical engineering industry, dealing with the design of individual process equipment and its configuration as a complete functional system. Chapters cover typical heat and mass transfer systems and equipment included in a chemical engineering curriculum, such as heat exchangers, heat exchanger networks, evaporators, distillation, absorption, adsorption, reactors and more. The authors expand on additional topics such as industrial cooling systems, extraction, and topics on process utilities, piping and hydraulics, including instrumentation and safety basics that supplement the equipment design procedure and help to arrive at a complete plant design. The chapters are arranged in sections pertaining to heat and mass transfer processes, reacting systems, plant hydraulics and process vessels, plant auxiliaries, and engineered safety as well as a separate chapter showcasing examples of process design in complete plants. This comprehensive reference bridges the gap between industry and academia, while exploring best practices in design, including relevant theories in process design making this a valuable primer for fresh graduates and professionals working on design projects in the industry. Serves as a consolidated resource for process and plant design, including process utilities and engineered safety Bridges the gap between industry and academia by including practices in design and summarizing relevant theories Presents design solutions as a complete functional system and not merely the design of major equipment Provides design procedures as pseudo-code/flow-chart, along with practical considerations

Download or read book Automobile Electrical and Electronic Systems written by Tom Denton and published by Routledge. This book was released on 2017-09-12 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook will help you learn all the skills you need to pass all Vehicle Electrical and Electronic Systems courses and qualifications. As electrical and electronic systems become increasingly more complex and fundamental to the workings of modern vehicles, understanding these systems is essential for automotive technicians. For students new to the subject, this book will help to develop this knowledge, but will also assist experienced technicians in keeping up with recent technological advances. This new edition includes information on developments in pass-through technology, multiplexing, and engine control systems. In full colour and covering the latest course specifications, this is the guide that no student enrolled on an automotive maintenance and repair course should be without. Designed to make learning easier, this book contains: Photographs, flow charts, quick reference tables, overview descriptions and step-by-step instructions. Case studies to help you put the principles covered into a real-life context. Useful margin features throughout, including definitions, key facts and ‘safety first’ considerations.

Download or read book Petroleum Refining Vol written by Jean-Pierre Wauquier and published by Editions OPHRYS. This book was released on with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this first volume, the reader will find, collected and condensed, the information needed to characterize, analyze, and evaluate crude oils from different origins and their corresponding petroleum cuts as well. The characteristics and specifications of all the petroleum products along with their simplified process flowsheets are reviewed.Contents: 1. Composition of crude oils and petroleum products. 2. Fractionation and elemental analysis of crude oils and petroleum cuts. 3. Characterization of crude oils and petroleum fractions. 4. Methods for the calculation of hydrocarbon physical properties. 5. Characteristics of petroleum products for energy use (motor fuels - heating fuels). 6. Characteristics of non-fuel petroleum products. 7. Standards and specifications of petroleum products. 8. Evaluation of crude oils. 9. Additives for motor fuels and lubricants. 10. Introduction to refining. Appendices: Principal characteristics of pure components. Principal standard test methods for petroleum products. References. Index.

Download or read book Handbook of Industrial Hydrocarbon Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2010-12-24 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. Flow diagrams and descriptions of more than 250 leading-edge process technologies An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials Properties, availability and environmental impact of various raw materials used in hydrocarbon processing

Download or read book The Biodiesel Handbook written by Gerhard Knothe and published by Elsevier. This book was released on 2015-08-13 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this invaluable handbook covers converting vegetable oils, animal fats, and used oils into biodiesel fuel. The Biodiesel Handbook delivers solutions to issues associated with biodiesel feedstocks, production issues, quality control, viscosity, stability, applications, emissions, and other environmental impacts, as well as the status of the biodiesel industry worldwide. Incorporates the major research and other developments in the world of biodiesel in a comprehensive and practical format Includes reference materials and tables on biodiesel standards, unit conversions, and technical details in four appendices Presents details on other uses of biodiesel and other alternative diesel fuels from oils and fats

Download or read book A Second Course in Business Statistics written by William Mendenhall and published by Macmillan College. This book was released on 1981-01-01 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Quality of Water Sediment and Fish in Mountain Creek Lake Dallas Texas 1994 97 written by and published by . This book was released on 2003 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petroleum Refining Vol 3 Conversion Processes written by Pierre Leprince and published by Editions TECHNIP. This book was released on 2001-01-01 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the characteristics of processes used in petroleum refining: upgrading light fractions (reforming and isomerization), converting distillates (catalytic cracking, hydrocracking, and associated equipment), converting residues (visbreaking, coking hydroconversion), and reducing air and water pollution (white product sweetening, acid gas, stack gas, and waste water treatment). This book is available in French Under the title "le raffinage du pétrole. Tome 3. Procédés de transformation". Contents : 1. Introduction. 2. Basic principles governing chemical changes. 3. Industrial catalysts. 4. Catalytic reforming. 5. Catalytic cracking. 6. Isomerization of light paraffins. 7. Aliphatic alkylation. 8. Olefin etherification. 9. Oligomerization. 10. Hydrocracking. 11. Visbreaking of residues. 12. Coking. 13. Residue hydroconversion. 14. Hydrogen production. 15. White products refining by sweetening. 16. Hydrotreating. 17. Acid gas treatment. 18. Desulfurization of stack gases. 19. Water treatment. References. Index.

Download or read book 7th International Conference on Practical Applications of Agents and Multi Agent Systems PAAMS 09 written by Yves Demazeau and published by Springer Science & Business Media. This book was released on 2009-03-08 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: PAAMS, the International Conference on Practical Applications of Agents and Multi-Agent Systems is an evolution of the International Workshop on Practical Applications of Agents and Multi-Agent Systems. PAAMS is an international yearly tribune to present, to discuss, and to disseminate the latest developments and the most important outcomes related to real-world applications. It provides a unique opportunity to bring multi-disciplinary experts, academics and practitioners together to exchange their experience in the development of Agents and Multi-Agent Systems. This volume presents the papers that have been accepted for the 2009 edition. These articles capture the most innovative results and this year’s trends: Assisted Cognition, E-Commerce, Grid Computing, Human Modelling, Information Systems, Knowledge Management, Agent-Based Simulation, Software Development, Transports, Trust and Security. Each paper has been reviewed by three different reviewers, from an international committee composed of 64 members from 20 different countries. From the 92 submissions received, 35 were selected for full presentation at the conference, and 26 were accepted as posters.

Download or read book Petroleum Refining Crude oil petroleum products process flowsheets written by Jean-Pierre Wauquier and published by Editions TECHNIP. This book was released on 1995 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this first volume, the reader will find, collected and condensed, the information needed to characterize, analyze, and evaluate crude oils from different origins and their corresponding petroleum cuts as well. The characteristics and specifications of all the petroleum products along with their simplified process flowsheets are reviewed.Contents: 1. Composition of crude oils and petroleum products. 2. Fractionation and elemental analysis of crude oils and petroleum cuts. 3. Characterization of crude oils and petroleum fractions. 4. Methods for the calculation of hydrocarbon physical properties. 5. Characteristics of petroleum products for energy use (motor fuels - heating fuels). 6. Characteristics of non-fuel petroleum products. 7. Standards and specifications of petroleum products. 8. Evaluation of crude oils. 9. Additives for motor fuels and lubricants. 10. Introduction to refining. Appendices: Principal characteristics of pure components. Principal standard test methods for petroleum products. References. Index.

Download or read book Drinking Water Contaminant Candidate List written by and published by . This book was released on 1998 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Management Science written by Wayne L. Winston and published by South Western Educational Publishing. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text takes an active-learning approach, providing numerous examples and problems so students can practice extensively with a concept before moving on. Four types of problems -- skill-building, skill-extending, modeling, and cases are graded within sections and chapters to help instructors assign homework. Another important feature is the way that the text integrates modeling into all functional areas of business: finance, marketing, operations management using real examples and real data. The text emphasizes modeling over algebraic formulations and memorization of particular models. Shell files are also provided so that instructors can give students as much or as little information as they need.