Download or read book MouldMaking and Casting written by Nick Brooks and published by Crowood. This book was released on 2013-12-21 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mouldmaking and Casting is a technical manual of the many techniques of this ancient craft and art form. With step-by-step illustrations, it explains the materials required and the processes involved to create reproductions of a range of pieces. The book covers traditional techniques as well as today's more advanced technical methods.
Download or read book The Essential Guide to Mold Making Slip Casting written by Andrew Martin and published by Sterling Publishing Company. This book was released on 2006 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: For potters, mold making is invaluable because it allows them to slip-cast identical multiples of their work-and this newly revised, now in color edition of Andrew Martin's classic is the definitive guide to the craft. No other volume has shown the processes in such how-to detail. It's overflowing with hundreds of photos, key techniques, projects, master artist profiles, and troubleshooting tips. A thorough introduction addresses materials and tools, and presents Martin's simple, unique template method for making clay prototypes. Create easy one-piece molds to make tiles, bowls, and platters, or multi-piece molds for more complex forms. An extensive overview covers slip formulation, while offering highly desired slip recipes for low-, mid-, and high-fire clay bodies. This will be the standard reference in every ceramist's library.
Download or read book Modeller s Guide to Mould Making and Resin Casting written by Alex Hornor and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in depth manual for modellers that takes the reader through all of the practical aspects of mouldmaking, using materials such as latex and RTV. There is extensive coverage of casting, too, enabling the modeller to produce perfect duplicates from their original pattern. While the text is aimed at mouldmaking and resin casting, covering both simple one and two part moulds, there are other casting materials covered in the book for the modelmaker who wishes to explore other media, including spin casting. There is even a chapter on vacuum forming, with details of how to build and run a 'kitchen sink' vacuum forming operation, showing how to make vaccuum forming something even the beginner can undertake with confidence.
Download or read book Mould Making for Glass written by Angela Thwaites and published by Herbert Press. This book was released on 2019-06-11 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly all glass makers (unless they are blowing glass) need moulds which can go in the kiln, as part of the process of creating their work. Currently glass students and makers get their expertise and recipes from lots of different sources, picking out the relevant bits and pieces which they need from other glass and ceramic books. This book aims to introduce all the mould-making techniques for casting glass, with detailed information on materials, recipes for mould mixes, methods and applications. It helps the student to learn which methods are appropriate for different types of work, and covers all the basics of how to make your mould. It also includes practical information on sourcing, storing, using and recycling materials, and how to develop your own recipes and methods for particular projects. It also covers where to start with writing programmes for kiln firings including annealing and cooling. It also contains images from well-known artists working in cast glass throughout.
Download or read book Advanced Mouldmaking and Casting written by Nick Brooks and published by Crowood Press (UK). This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope and potential of mouldmaking and casting is fascinating. Its opportunities have been developed and expanded further by a range of new methods and materials only recently made available to the domestic market. This book provides a guide to more advanced techniques in mouldmaking and casting.
Download or read book Fine Art Metal Casting written by Richard Rome and published by . This book was released on 2003 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mould making and the lost wax casting of metals for fine art are long-established techniques, which involve both artistic and material science considerations. The methods described in Fine Art Metal Casting cross a broad range of disciplines, from ceramics and glass through to jewellery and areas of conservation, archaeology, and palaeontology, where replicas must be made. This book provides a unique, all-encompassing, visually-based demonstrative source which will prove invaluable for art-, craft-, and design-based practitioners, art historians and curators, scientists and conservators, and researchers and students.
Download or read book The Prop Builder s Molding Casting Handbook written by Thurston James and published by Betterway Books. This book was released on 1989-11-15 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Prop Builder's Molding & Casting Handbook &break;&break;This is the first book to contain, in one comprehensive volume, every molding and casting procedure of use to the theater props builder (no matter what his or her level or proficiency). The author demonstrates the techniques involved in using more than thirty different materials ranging from papier-mache to breakaway glass. &break;&break;While the use of some materials–plaster and polyester resins, for example–is covered to some extent in other publications, information on the selection and use of rubber materials (latex, neoprene, silicone, and the urethanes) and the procedure for making breakaway windows and bottles is available only in The Prop Builder's Molding & Casting Handbook. &break;&break;Written in an easy, conversational style, the book will be useful to anyone involved with theater properties, puppetry, and costuming (as professionals or amateurs). It will also serve admirably the needs of students taking classes in those subjects. &break;&break;Completing the book is a special section on designing and building a vacuum forming machine suitable for use in constructing theater props. More than 450 photographs illustrate the step-by-step procedures explained throughout the entire text.
Download or read book Secrets of Expert Mold Making and Resin Casting written by Karl K. Juelch and published by Createspace Independent Pub. This book was released on 2013-10-14 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to make professional quality molds, then use those molds to make precise, flawless castings. Reproduce virtually any three dimensional object once, twice, dozens or even hundreds of times. Informative text and over 100 highly detailed line drawings guide the reader from the basics to very advanced procedures. Emphasis is on low cost materials and equipment ideally suited to the individual artisan or small business owner. A very wide range of artists, crafts and trades people, design professionals and entrepreneurs can use these techniques to increase their productivity and profits. This book is the result of years of research, experimentation and daily use in a professional shop environment.
Download or read book Mold Making for Ceramics written by Donald E. Frith and published by A & C Black. This book was released on 1992 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference and practical book demonstrating the craft of making and using all types of moulds whether they are made of plaster, Styrofoam or wood. Step-by-step directions and photographs illustrate their use and two calculators - one of volume and mix and another a shrinkage compensating devise - accompany the book.
Download or read book The Prop Building Guidebook written by Eric Hart and published by Taylor & Francis. This book was released on 2016-12-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experienced prop maker Eric Hart walks readers through techniques used in historical and contemporary prop making and demonstrates how to apply them to a variety of materials. Hundreds of full-color photographs illustrate the tools and techniques used by professional prop makers throughout the entertainment industry. New features to the second edition include: Updated information on the latest tools and materials used in prop making Both metric and standard measuring units Step-by-step photos on common techniques such as upholstery, mold making, and faux finishing Expanded coverage of thermoplastics, foam, and water-based coatings
Download or read book Slipcasting written by Sasha Wardell and published by University of Pennsylvania Press. This book was released on 2007-08-02 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: A straightforward, practical guide for those interested in the boundless possibilities of this ceramic technique. The book contains more than one hundred color illustrations, diagrams, and slip formulas, plus examples of the slipcast work of contemporary ceramicists from around the world.
Download or read book Portrait Sculpting written by Philippe Faraut and published by Pcf Studios. This book was released on 2004-01-01 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step techniques for modeling the portrait in clay, firing meethods and mold making.
Download or read book Glass Casting written by Amy Whittingham and published by The Crowood Press. This book was released on 2019-06-24 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass casting is an exciting and versatile process involving chunks of molten glass melted into a mould, where it solidifies. This practical book explains the glass casting process, from the initial search for inspiration through to simple and then more complex casting. With step-by-step instructions and supporting photographs, it is an accessible and thorough account of this challenging and beautiful process. Topics covered include: advice on kilns and studio equipment; step-by-step projects in open casting, lost-wax casting, part-mould making, burn-out moulds and core casting; ideas for experimentation to increase the scale of your work, explore surface pattern and use other materials; instruction on de-moulding and finishing, and further tips on reusing materials in the studio. Of great interest to glass designers, glass blowers, craftsmen, jewellers, sculptors and interior designers, it is superbly illustrated with 184 colour photographs. Amy Whittingham is a glass artist and sculpture who specializes in mouldmaking.
Download or read book Plaster Mold and Model Making written by Charles Chaney and published by Van Nostrand Reinhold. This book was released on 1978-07-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mould Core Material for the Steel Foundry written by A. D. Sarkar and published by Elsevier. This book was released on 2014-06-28 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mould and Core Materials for Steel Foundry covers the significant progress in the development of various types of mould and core materials for steel founding. This book is composed of 17 chapters, and begins with the presentation of the testing procedures for the materials’ properties such as green and dry strengths, permeability, amount of gas evolved, shatter index together with hardness of rammed moulds. The next chapters provide the testing procedures and routine control of sand, silica, non-siliceous materials, binders, and clay bond. These topics are followed by discussions on sand preparation, shell mould, and other core materials, such as furanes. This book describes some steel foundry processes, including heat extraction, casting, and hot tear. The final chapters deal with the reconditioning and reclamation of sand, casting and scab defects, evaluation of high temperature properties, and the technical control of raw materials to ensure conformation to the specified standards.
Download or read book Science and Technology of Casting Processes written by Malur Srinivasan and published by BoD – Books on Demand. This book was released on 2012-09-26 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various science and technology factors that need careful consideration in producing a casting. It consists of 11 chapters contributed by experts in their respective fields. The topics include simulation of continuous casting process, control of solidification of continuous castings, influence of mold flux in continuous casting, segregation in strip casting of steel, developments in shell and solid investment mold processes, innovative pressure control during filling of sand molds, fracture toughness specifically of castings, permanent molding of cast iron, wear resistant castings and improvement of accuracy in estimating graphite nodularity in ductile iron castings.
Download or read book The Casting of Angels written by David E. Parvin, A.L.I. and published by Lulu.com. This book was released on 2015 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of over sixty informative articles on the business of art, sculpting, life casting, equipment and modeling that have appeared in the Art Casting Journal, Sculpture Journal and the ArtMolds Journal from the years 2003 to 2014
