Download or read book Reeds Vol 12 Motor Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by A&C Black. This book was released on 2012-12-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to compliment Volume 8 (General Engineering Knowledge) and work as an examination guide for the requirements of the IMO's Engineering Knowledge under regulation III/2, covering the syllabuses followed by Chief Engineers and 2nd Engineers, this book helps officer cadets working toward the STCW Officer of the Watch qualification or equivalent academic award. Starting with the theoretical and practical thermodynamic operating cycles, the book is structured to give a description of the engines and components used to extract energy from fossil fuels and achieve high levels of productivity. The book covers areas that have the potential to affect engine efficiency and emissions including new electronic control systems, fuel injection and efficient turbocharging. It also looks at waste heat recovery, an important development area for improving the environmental impact of ocean going vessels. It also considers new technology and individual components within the engine which means that more energy, left over from the combustion process, can be extracted and used to improve the total thermal efficiency. The book evaluates issues of safety and environment, highlighting why the new technology must work correctly at all times and why it is necessary that engineering staff onboard understand its operation as well the consequences of any malfunction. This key textbook takes into account the varying needs of students studying motor engineering, recognising recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, including National diplomas, Higher National Diploma and degree courses.
Download or read book Reeds Vol 12 Motor Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2018-09-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol 8 (General Engineering for Marine Engineers), this indispensable textbook comprehensively covers the motor engineering syllabus for marine engineering officer cadets. Starting with the theoretical and practical thermodynamic operating cycles, the book is structured to give a description of the engines and components used to extract energy from fossil fuels and achieve high levels of efficiency. Accessibly written and clearly illustrated, this book is the only guide available for marine engineering students focusing on the knowledge needed for passing the motor engineering certificate of Competency (CoC) examinations. This new edition reflects all developments within the discipline and includes updates and additions on, amongst other things: · Engine emissions and control engineering · Fuel injection · Starting and reversing · Ancillary supply systems · Safety and the environment Plus updates to many of the technical engineering drawings.
Download or read book Reed s Motor Engineering Knowledge for Marine Engineers written by Thomas D. Morton and published by . This book was released on 1978 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reeds Vol 12 written by Leslie Jackson and published by Thomas Reed. This book was released on 2009-10-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book is a companion to Volume 8 in the same series and is a specific examination guide for the syllabuses of Motor Engineering Knowledge for the Second and First Class Marine Engineers' Motor Certificates and Endorsements. Subjects covered include basic cycles, indicator diagrams, starting and reversing systems, cylinders, pistons, crankshafts and deflections, medium speed diesel engines, governors, control, waste heat systems, and crankcase explosions. Also included are typical exam questions for practice.
Download or read book Motor Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by A&C Black. This book was released on 2013-01-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to modern equipment found in merchant ships focusing on 'motor' propulsion for marine engineers.
Download or read book Reeds Vol 8 General Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2018-09-06 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol 12 (Motor Engineering for Marine Engineers), this textbook is key for all marine engineering officer cadets. Accessibly written and clearly illustrated, General Engineering Knowledge for Marine Engineers takes into account the varying needs of students studying 'general' marine engineering, recognising recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career. It includes the latest equipment, practices and trends in marine engineering, as well as incorporating the 2010 Manila Amendments, particularly relating to management. It is an essential buy for any marine engineering student. This new edition reflects all developments within the discipline and includes updates and additions on, amongst other things: · Corrosion, water treatments and tests · Refrigeration and air conditioning · Fuels, such as LNG and LPG · Insulation · Low sulphur fuels · Fire and safety Plus updates to many of the technical engineering drawings.
Download or read book Reeds Vol 8 General Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by A&C Black. This book was released on 2013-07-22 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol. 12 (Motor Engineering for Marine Engineers), this textbook is key for all marine engineering officer cadets. This new edition has been extensively updated to include the latest equipment, practices and trends in marine engineering, as well as incorporating the 2010 Manila Amendments, particularly relating to Management. Accessibly written and clearly illustrated, this book is the core guide focusing on the knowledge needed for passing the engineering certificate of Competency (CoC) examinations. This key textbook takes into account the varying needs of students studying motor engineering, recognising recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, including National diplomas, Higher National Diploma and degree courses. An essential buy for any marine engineering student.
Download or read book Motor Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by . This book was released on 2012 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Motor Engineering Knowledge for Marine Engineers written by Thomas D. Morton and published by A & C Black. This book was released on 1994-10 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a specific examination guide based on the syllabuses of Motor Engineering Knowledge for Class 2 and Class 1 Marine Engineer Motor Certificates and Motor Endorsements. There is also a selection of questions of the type set in the exams for First and Second Class Engineers.
Download or read book Reed s Motor Engineering Knowledge for Marine Engineers written by Thomas Dunn Morton and published by . This book was released on 1975 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book General Engineering Knowledge written by H D McGeorge and published by Routledge. This book was released on 2012-09-10 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the general engineering knowledge required by candidates for the Department of Transport's Certificates of Competency in Marine Engineering, Class One and Class Two. The text is updated throughout in this third edition, and new chapters have been added on production of fresh water and on noise and vibration. Reference is also provided to up-to-date papers and official publications on specialized topics. These updates ensure that this little volume will continue to be a useful pre-examination and revision text. - Marine Engineers Review, January 1992
Download or read book Introduction to Marine Engineering written by D A Taylor and published by Elsevier. This book was released on 2014-05-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Marine Engineering explains the operation of all the ship's machinery, with emphasis on correct, safe operating procedures and practices at all times. Organized into 17 chapters, this book begins with an overall look at the ship. Subsequent chapters describe the various ship machineries, including diesel engines, steam turbines, boilers, feed systems, pumps, auxiliaries, deck machinery, hull equipment, shafting, propellers, steering gear, and electrical equipment. Other aspects of marine engineering, particularly, fuel oils, lubricating oils, refrigeration, air conditioning, ventilation, firefighting and safety, watchkeeping, and equipment operation, are also described. This book will be useful to anyone with an interest in ships' machinery or a professional involvement in the shipping business.
Download or read book General Engineering Knowledge written by H D McGeorge and published by Routledge. This book was released on 2012-09-10 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the general engineering knowledge required by candidates for the Department of Transport's Certificates of Competency in Marine Engineering, Class One and Class Two. The text is updated throughout in this third edition, and new chapters have been added on production of fresh water and on noise and vibration. Reference is also provided to up-to-date papers and official publications on specialized topics. These updates ensure that this little volume will continue to be a useful pre-examination and revision text. - Marine Engineers Review, January 1992
Download or read book Reed s Motor Engineering Knowledge for Marine Engineers written by Thomas Dunn Morton and published by A&C Black. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a companion to Volume 8 of the same series (General Engineering Knowledge) and is written as a specific examination guide based on the syllabuses of Motor Engineering Knowledge for the Second and First Class Marine Engineers Motor Certificates and Motor Endorsements. In particular, the illustrations are simple diagrammatic line sketches which the student should find easy to follow. Subjects covered include: Basic cycles, indicator diagrams, starting and reversing systems, cylinders, pistons, crankshafts and deflections, medium speed diesel engines, governors, control, waste heat systems, crankcase explosions. Book jacket.
Download or read book Engineering Knowledge Motor for Marine Engineers written by Ritinkar Sen and published by Gwasg y Bwthyn. This book was released on 2015 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Marine Electrical Equipment and Practice written by H D MCGEORGE and published by Butterworth-Heinemann. This book was released on 2014-06-28 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Caters for marine engineer candidates for Department of Transport Certification as Marine Engineer Class One and Class Two. It covers the various items of ships' electrical equipment and explains operating principles. David McGeorge is a former lecturer in Marine Engineering at the College of Maritime Studies, Warsash, Southampton. He is the author of General Engineering Knowledge.
Download or read book Reeds Vol 2 Applied Mechanics for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2021-12-09 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the principal topics in applied mechanics for professional trainees studying Merchant Navy Marine Engineering Certificates of Competency (CoC) as well as the core syllabi in applied mechanics for undergraduates studying for BSc, BEng and MEng degrees in marine engineering, naval architecture and other marine technology related programmes. This new edition has been fully updated to reflect the recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, specifically the increased emphasis that has been placed on colleges and universities now responsible for the academic requirements for those studying for a career in marine engineering. In particular this means the book has been updated to include more information about the general principles and applications of the exercises in the practical world of marine engineering. Each chapter has fully worked examples interwoven into the text, with test examples set at the end of each chapter. Other revisions include examples reflecting modern machines and practice, current legislation and current syllabi.
