Download or read book Motion Kinematics for Series parallel Robots Using a Virtual Link Concept written by Deepak Shukla and published by . This book was released on 1991 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Parallel Robots written by Sébastien Briot and published by Springer. This book was released on 2015-06-22 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with a short recapitulation on basic concepts, common to any types of robots (serial, tree structure, parallel, etc.), that are also necessary for computation of the dynamic models of parallel robots. Then, as dynamics requires the use of geometry and kinematics, the general equations of geometric and kinematic models of parallel robots are given. After, it is explained that parallel robot dynamic models can be obtained by decomposing the real robot into two virtual systems: a tree-structure robot (equivalent to the robot legs for which all joints would be actuated) plus a free body corresponding to the platform. Thus, the dynamics of rigid tree-structure robots is analyzed and algorithms to obtain their dynamic models in the most compact form are given. The dynamic model of the real rigid parallel robot is obtained by closing the loops through the use of the Lagrange multipliers. The problem of the dynamic model degeneracy near singularities is treated and optimal trajectory planning for crossing singularities is proposed. Lastly, the approach is extended to flexible parallel robots and the algorithms for computing their symbolic model in the most compact form are given. All theoretical developments are validated through experiments.
Download or read book Dynamics of Parallel Robots written by Stefan Staicu and published by Springer. This book was released on 2018-09-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book establishes recursive relations concerning kinematics and dynamics of constrained robotic systems. It uses matrix modeling to determine the connectivity conditions on the relative velocities and accelerations in order to compare two efficient energetic ways in dynamics modeling: the principle of virtual work, and the formalism of Lagrange's equations. First, a brief fundamental theory is presented on matrix mechanics of the rigid body, which is then developed in the following five chapters treating matrix kinematics of the rigid body, matrix kinematics of the composed motion, kinetics of the rigid body, dynamics of the rigid body, and analytical mechanics. By using a set of successive mobile frames, the geometrical properties and the kinematics of the vector system of velocities and accelerations for each element of the robot are analysed. The dynamics problem is solved in two energetic ways: using an approach based on the principle of virtual work and applying the formalism of Lagrange's equations of the second kind. These are shown to be useful for real-time control of the robot's evolution. Then the recursive matrix method is applied to the kinematics and dynamics analysis of five distinct case studies: planar parallel manipulators, spatial parallel robots, planetary gear trains, mobile wheeled robots and, finally, two-module hybrid parallel robots.
Download or read book Advances in Robot Kinematics Motion in Man and Machine written by Jadran Lenarčič and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ?rst International Meeting of Advances in Robot Kinematics, ARK, occurred in September 1988, by invitation to Ljubljana, Slovenia, of a group of 20 int- nationally recognized researchers, representing six different countries from three continents. There were 22 lectures and approximately 150 attendees. This success of bringing together excellent research and the international community, led to the formation of a Scienti?c Committee and the decision to repeat the event biannually. The meeting was made open to all individuals with a critical peer review process of submitted papers. The meetings have since been continuously supported by the Jozef ? Stefan Institute and since 1992 have come under patronage of the Inter- tionalFederationforthePromotionofMechanismandMachineScience(IFToMM). Springer published the ?rst book of the series in 1991 and since 1994 Kluwer and Springer have published a book of the presented papers every two years. The papers in this book present the latest topics and methods in the kinem- ics, control and design of robotic manipulators. They consider the full range of - botic systems, including serial, parallel and cable driven manipulators, both planar and spatial. The systems range from being less than fully mobile to kinematically redundant to overconstrained. The meeting included recent advances in emerging areas such as the design and control of humanoids and humanoid subsystems, the analysis, modeling and simulation of human body motion, the mobility analysis of protein molecules and the development of systems which integrate man and - chine.
Download or read book Parallel Robots With Unconventional Joints written by Patrick Grosch and published by Springer. This book was released on 2019-03-20 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how, through certain geometric transformations, some of the standard joints used in parallel robots can be replaced with lockable or non-holonomic joints. These substitutions allow for reducing the number of legs, and hence the number of actuators needed to control the robot, without losing the robot's ability to bring its mobile platform to the desired configuration. The kinematics of the most representative examples of these new designs are analyzed and their theoretical features verified through simulations and practical implementations.
Download or read book Cable Driven Parallel Robots written by Tobias Bruckmann and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering presentations to the First International Conference on Cable-Driven Parallel Robots, this book covers classification and definition, kinematics, workspace analysis, cable modeling, hardware/prototype development, control and calibration and more.
Download or read book Smart Devices and Machines for Advanced Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2008-02-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of quality chapters on the state-of-the-art of research efforts in the area of smart devices and novel machine design, as well as their practical applications to enable advanced manufacturing. The first section presents a broad-based review of several key areas of research in smart devices and machines. The second section is focused on presenting an in-depth treatment of a particular device or machine. The book will be of interest to a broad readership.
Download or read book Robotics Spatial Mechanisms and Mechanical Systems written by Gary L. Kinzel and published by . This book was released on 1992 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parallel Kinematics written by Xin-Jun Liu and published by Springer Science & Business Media. This book was released on 2013-08-15 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Kinematics- Type, Kinematics, and Optimal Design presents the results of 15 year's research on parallel mechanisms and parallel kinematics machines. This book covers the systematic classification of parallel mechanisms (PMs) as well as providing a large number of mechanical architectures of PMs available for use in practical applications. It focuses on the kinematic design of parallel robots. One successful application of parallel mechanisms in the field of machine tools, which is also called parallel kinematics machines, has been the emerging trend in advanced machine tools. The book describes not only the main aspects and important topics in parallel kinematics, but also references novel concepts and approaches, i.e. type synthesis based on evolution, performance evaluation and optimization based on screw theory, singularity model taking into account motion and force transmissibility, and others. This book is intended for researchers, scientists, engineers and postgraduates or above with interests in robotics and advanced machine tools technology such as parallel kinematics machines (PKMs). Xinjun Liu and Jinsong Wang, professors, work at The Institute of Manufacturing Engineering, Department of Precision Instruments and Mechanology, Tsinghua University.
Download or read book Parallel Robotic Machine Tools written by Dan Zhang and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development of various parallel mechanism applications in engineering are now being performed more and more actively in every industrial field. Parallel robot based machine tools development is considered a key technology of robot applications in manufacturing industries. The material covered here describes the basic theory, approaches, and algorithms in the field of parallel robot based machine tools. In addition families of new alternative mechanical architectures which can be used for machine tools with parallel architecture are introduced. Given equal importance is the design of mechanism systems such as kinematic analysis, stiffness analysis, kinetostatic modeling, and optimization.
Download or read book Type Synthesis of Parallel Mechanisms written by Xianwen Kong and published by Springer. This book was released on 2007-10-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique monograph focuses on the systematic type synthesis of parallel mechanisms (PMs), a key issue in the creative design of a wide variety of innovative devices such as parallel manipulators, motion simulators, and haptic devices. Essential reading for researchers, developers, engineers and graduate students with interests in robotics, this book covers the classification of PMs as well as providing a large number of PMs ready to be used in practical applications.
Download or read book Parallel Robots written by Hamid D. Taghirad and published by CRC Press. This book was released on 2013-02-20 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel structures are more effective than serial ones for industrial automation applications that require high precision and stiffness, or a high load capacity relative to robot weight. Although many industrial applications have adopted parallel structures for their design, few textbooks introduce the analysis of such robots in terms of dynamics and control. Filling this gap, Parallel Robots: Mechanics and Control presents a systematic approach to analyze the kinematics, dynamics, and control of parallel robots. It brings together analysis and design tools for engineers and researchers who want to design and implement parallel structures in industry. Covers Kinematics, Dynamics, and Control in One Volume The book begins with the representation of motion of robots and the kinematic analysis of parallel manipulators. Moving beyond static positioning, it then examines a systematic approach to performing Jacobian analysis. A special feature of the book is its detailed coverage of the dynamics and control of parallel manipulators. The text examines dynamic analysis using the Newton-Euler method, the principle of virtual work, and the Lagrange formulations. Finally, the book elaborates on the control of parallel robots, considering both motion and force control. It introduces various model-free and model-based controllers and develops robust and adaptive control schemes. It also addresses redundancy resolution schemes in detail. Analysis and Design Tools to Help You Create Parallel Robots In each chapter, the author revisits the same case studies to show how the techniques may be applied. The case studies include a planar cable-driven parallel robot, part of a promising new generation of parallel structures that will allow for larger workspaces. The MATLAB® code used for analysis and simulation is available online. Combining the analysis of kinematics and dynamics with methods of designing controllers, this text offers a holistic introduction for anyone interested in designing and implementing parallel robots.
Download or read book Advances in Robot Kinematics written by Jadran Lenarčič and published by Springer. This book was released on 2014-05-19 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics addressed in this book cover the whole range of kinematic analysis, synthesis and design and consider robotic systems possessing serial, parallel and cable driven mechanisms. The robotic systems range from being less than fully mobile to kinematically redundant to over constrained. The fifty-six contributions report the latest results in robot kinematics with emphasis on emerging areas such as design and control of humanoids or humanoid subsystems. The book is of interest to researchers wanting to bring their knowledge up to date regarding modern topics in one of the basic disciplines in robotics, which relates to the essential property of robots, the motion of mechanisms.
Download or read book Proceedings of the Japan U S A Symposium on Flexible Automation written by and published by . This book was released on 1992 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Balancing of Mechanisms and Synthesizing of Parallel Robots written by Dan Zhang and published by Springer. This book was released on 2015-10-20 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state-of-the-art technologies in dynamic balancing of mechanisms with minimum increase of mass and inertia. The synthesis of parallel robots based on the Decomposition and Integration concept is also covered in detail. The latest advances are described, including different balancing principles, design of reactionless mechanisms with minimum increase of mass and inertia, and synthesizing parallel robots. This is an ideal book for mechanical engineering students and researchers who are interested in the dynamic balancing of mechanisms and synthesizing of parallel robots. This book also: · Broadens reader understanding of the synthesis of parallel robots based on the Decomposition and Integration concept · Reinforces basic principles with detailed coverage of different balancing principles, including input torque balancing mechanisms · Reviews exhaustively the key recent research into the design of reactionless mechanisms with minimum increase of mass and inertia, such as the design of reactionless mechanisms with auxiliary parallelograms, the design of reactionless mechanisms with flywheels, and the design of reactionless mechanisms by symmetrical structure design.
Download or read book Cable Driven Parallel Robots written by Marc Gouttefarde and published by Springer. This book was released on 2022-06-02 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of cable robots, as presented by leading international researchers and engineers at the 5th International Conference on Cable-Driven Parallel Robots (CableCon 2021), held as virtual event on July 7-9, 2021. It covers the theory and applications of cable-driven parallel robots, including their classification, kinematics and singularity analysis, workspace, statics and dynamics, cable modeling and technologies, control and calibration, design methodologies, hardware development, experimental evaluation and prototypes, as well as application reports and new application concepts. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Intelligent Robotics and Applications written by Xianmin Zhang and published by Springer. This book was released on 2014-11-15 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNAI 8917 and 8918 constitutes the refereed proceedings of the 7th International Conference on Intelligent Robotics and Applications, ICIRA 2014, held in Guangzhou, China, in December 2014. The 109 revised full papers presented were carefully reviewed and selected from 159 submissions. The papers aim at enhancing the sharing of individual experiences and expertise in intelligent robotics with particular emphasis on technical challenges associated with varied applications such as biomedical applications, industrial automations, surveillance, and sustainable mobility.
