Download or read book Motion Control Systems written by Asif Sabanovic and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion Control Systems is concerned with design methods that support the never-ending requirements for faster and more accurate control of mechanical motion. The book presents material that is fundamental, yet at the same time discusses the solution of complex problems in motion control systems. Methods presented in the book are based on the authors' original research results. Mathematical complexities are kept to a required minimum so that practicing engineers as well as students with a limited background in control may use the book. It is unique in presenting know-how accumulated through work on very diverse problems into a comprehensive unified approach suitable for application in high demanding, high-tech products. Major issues covered include motion control ranging from simple trajectory tracking and force control, to topics related to haptics, bilateral control with and without delay in measurement and control channels, as well as control of nonredundant and redundant multibody systems. Provides a consistent unified theoretical framework for motion control design Offers graduated increase in complexity and reinforcement throughout the book Gives detailed explanation of underlying similarities and specifics in motion control Unified treatment of single degree-of-freedom and multibody systems Explains the fundamentals through implementation examples Based on classroom-tested materials and the authors' original research work Written by the leading researchers in sliding mode control (SMC) and disturbance observer (DOB) Accompanying lecture notes for instructors Simulink and MATLAB® codes available for readers to download Motion Control Systemsis an ideal textbook for a course on motion control or as a reference for post-graduates and researchers in robotics and mechatronics. Researchers and practicing engineers will also find the techniques helpful in designing mechanical motion systems.
Download or read book Motion Control of Underactuated Mechanical Systems written by Javier Moreno-Valenzuela and published by Springer. This book was released on 2017-07-11 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the first to present a unified perspective on the control of underactuated mechanical systems. Based on real-time implementation of parameter identification, this book provides a variety of algorithms for the Furuta pendulum and the inertia wheel pendulum, which are two-degrees-of-freedom mechanical systems. Specifically, this work addresses and solves the problem of motion control via trajectory tracking in one joint coordinate while another joint is regulated. Besides, discussions on extensions to higher degrees-of-freedom systems are given. The book, aimed at control engineers as well as graduate students, ranges from the problem of parameter identification of the studied systems to the practical implementation of sophisticated motion control algorithms. Offering real-world solutions to manage the control of underactuated systems, this book provides a concise tutorial on recent breakthroughs in the field, original procedures to achieve bounding of the error trajectories, convergence and gain tuning guidelines.
Download or read book Industrial Motion Control written by Dr. Hakan Gurocak and published by John Wiley & Sons. This book was released on 2016-03-14 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion control is widely used in all types of industries including packaging, assembly, textile, paper, printing, food processing, wood products, machinery, electronics and semiconductor manufacturing. Industrial motion control applications use specialized equipment and require system design and integration. To design such systems, engineers need to be familiar with industrial motion control products; be able to bring together control theory, kinematics, dynamics, electronics, simulation, programming and machine design; apply interdisciplinary knowledge; and deal with practical application issues. The book is intended to be an introduction to the topic for senior level undergraduate mechanical and electrical engineering students. It should also be resource for system design engineers, mechanical engineers, electrical engineers, project managers, industrial engineers, manufacturing engineers, product managers, field engineers, and programmers in industry.
Download or read book Industrial Motion Control written by Dr. Hakan Gurocak and published by John Wiley & Sons. This book was released on 2015-10-19 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion control is widely used in all types of industries including packaging, assembly, textile, paper, printing, food processing, wood products, machinery, electronics and semiconductor manufacturing. Industrial motion control applications use specialized equipment and require system design and integration. To design such systems, engineers need to be familiar with industrial motion control products; be able to bring together control theory, kinematics, dynamics, electronics, simulation, programming and machine design; apply interdisciplinary knowledge; and deal with practical application issues. The book is intended to be an introduction to the topic for senior level undergraduate mechanical and electrical engineering students. It should also be resource for system design engineers, mechanical engineers, electrical engineers, project managers, industrial engineers, manufacturing engineers, product managers, field engineers, and programmers in industry.
Download or read book Structural Motion Engineering written by Jerome Connor and published by Springer. This book was released on 2014-06-26 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This innovative volume provides a systematic treatment of the basic concepts and computational procedures for structural motion design and engineering for civil installations. The authors illustrate the application of motion control to a wide spectrum of buildings through many examples. Topics covered include optimal stiffness distributions for building-type structures, the role of damping in controlling motion, tuned mass dampers, base isolation systems, linear control, and nonlinear control. The book's primary objective the satisfaction of motion-related design requirements such as restrictions on displacement and acceleration and seeks the optimal deployment of material stiffness and motion control devices to achieve these design targets as well as satisfy constraints on strength. The book is ideal for practicing engineers and graduate students.
Download or read book Precision Motion Control written by Kok Kiong Tan and published by Springer Science & Business Media. This book was released on 2007-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Precision Motion Control focuses on enabling technologies for precision engineering. It has been extensively edited and rewritten throughout with the following particular areas being expanded or added: • piezoelectric actuators • fine movement control • gantry-stage control • interpolation of quadrature encoder signals • geometrical error modeling for single-, dual- and general-XY-axis stages.
Download or read book Electrical Drives written by Jens Weidauer and published by John Wiley & Sons. This book was released on 2014-07-07 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the point of view of a user this book covers all aspects of modern electrical drives. It is aimed at both users, who wish to understand, design, use, and maintain electrical drives, as well as specialists, technicians, engineers, and students, who wish to gain a comprehensive overview of electrical drives. Jens Weidauer and Richard Messer describe the principles of electrical drives, their design, and application, through to complex automation solutions. In the process, they introduce the entire spectrum of drive solutions available and their main applications. A special aspect is the combination of multiple drives to form a drive system, as well as the integration of drives into automation solutions. In simple and clear language, and supported with many diagrams, complex relationships are described and presented in an easy-to-understand way. The authors deliberately avoid a comprehensive mathematical treatment of their subject and instead focus on a coherent description of the active principles and relationships. As a result, the reader will be in a position to understand electrical drives as a whole and to solve drive-related problems in everyday professional life.
Download or read book Drive Solutions written by Edwin Kiel and published by Springer Science & Business Media. This book was released on 2008-01-10 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly automated production and logistics facilities require mechatronic drive solutions. This book describes in which way the industrial production and logistics work and shows the structure of the drive solutions required for this purpose. The functionality of the mechanical and electronic elements of a drive system is described, and their basic dimensioning principles are explained. The authors also outline the engineering, reliability, and important aspects of the life cycle.
Download or read book Learning for Adaptive and Reactive Robot Control written by Aude Billard and published by MIT Press. This book was released on 2022-02-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods by which robots can learn control laws that enable real-time reactivity using dynamical systems; with applications and exercises. This book presents a wealth of machine learning techniques to make the control of robots more flexible and safe when interacting with humans. It introduces a set of control laws that enable reactivity using dynamical systems, a widely used method for solving motion-planning problems in robotics. These control approaches can replan in milliseconds to adapt to new environmental constraints and offer safe and compliant control of forces in contact. The techniques offer theoretical advantages, including convergence to a goal, non-penetration of obstacles, and passivity. The coverage of learning begins with low-level control parameters and progresses to higher-level competencies composed of combinations of skills. Learning for Adaptive and Reactive Robot Control is designed for graduate-level courses in robotics, with chapters that proceed from fundamentals to more advanced content. Techniques covered include learning from demonstration, optimization, and reinforcement learning, and using dynamical systems in learning control laws, trajectory planning, and methods for compliant and force control . Features for teaching in each chapter: applications, which range from arm manipulators to whole-body control of humanoid robots; pencil-and-paper and programming exercises; lecture videos, slides, and MATLAB code examples available on the author’s website . an eTextbook platform website offering protected material[EPS2] for instructors including solutions.
Download or read book Precision Motion Control written by Kok K. Tan and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision manufacturing is a development that has been gathering momentum over the last century and accelerating over the last 25 years in terms of research, development, and application to product innovation. The driving force in this development arises from requirements for much higher performance of products, higher reliability, longer life, lower cost, and miniaturization. This development is widely known as precision engineering and, today, it is generally defined as manufacturing to tolerances which are better than one part in 105. Applications are abound and can be found in various semiconductor processes (e.g., lithography, wafer probing, inspection), Coordinate Measuring Machines (CMMs) and precision metrology systems (e.g., Scanning Probe Microscopy (SPM)), and robot/machine tools to carry out micro-assembly (e.g., MEMS) and delicate short wavelength laser processes. As an enabling technology for precision engineering, precision instrumentation and measurement, geometrical calibration and compensation, and motion control are directly important issues to be addressed in the overall system design and realization. This book is focused on these aspects of precision engineering. It is a compilation of the major results and publications from a major project which develop a state-of-the-art high-speed, ultra-precision robotic system. A comprehensive and thorough treatment of the subject matter is provided in a manner that is amenable to a broad base of readers, ranging from the academics to the practitioners, by providing detailed experimental verifications of the developed materials.
Download or read book NASA Tech Briefs written by and published by . This book was released on 1986 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulics and Pneumatics written by Jagadeesha T. and published by . This book was released on 2015-11-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive treatment of the principles of hydraulics and pneumatics. The main objective is to provide a clear understanding of the concepts underlying hydraulics and pneumatics. Solved question papers and numerical examples are given to aid understanding.
Download or read book Digital Control of Electrical Drives written by Slobodan N. Vukosavic and published by Springer Science & Business Media. This book was released on 2007-08-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides broad insights into problems of coding control algorithms on a DSP platform. - Includes a set of Simulink simulation files (source codes) which permits readers to envisage the effects of control solutions on the overall motion control system. -bridges the gap between control analysis and industrial practice.
Download or read book Handbook of Marine Craft Hydrodynamics and Motion Control written by Thor I. Fossen and published by John Wiley & Sons. This book was released on 2021-04-16 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of MARINE CRAFT HYDRODYNAMICS AND MOTION CONTROL The latest tools for analysis and design of advanced GNC systems Handbook of Marine Craft Hydrodynamics and Motion Control is an extensive study of the latest research in hydrodynamics, guidance, navigation, and control systems for marine craft. The text establishes how the implementation of mathematical models and modern control theory can be used for simulation and verification of control systems, decision-support systems, and situational awareness systems. Coverage includes hydrodynamic models for marine craft, models for wind, waves and ocean currents, dynamics and stability of marine craft, advanced guidance principles, sensor fusion, and inertial navigation. This important book includes the latest tools for analysis and design of advanced GNC systems and presents new material on unmanned underwater vehicles, surface craft, and autonomous vehicles. References and examples are included to enable engineers to analyze existing projects before making their own designs, as well as MATLAB scripts for hands-on software development and testing. Highlights of this Second Edition include: Topical case studies and worked examples demonstrating how you can apply modeling and control design techniques to your own designs A Github repository with MATLAB scripts (MSS toolbox) compatible with the latest software releases from Mathworks New content on mathematical modeling, including models for ships and underwater vehicles, hydrostatics, and control forces and moments New methods for guidance and navigation, including line-of-sight (LOS) guidance laws for path following, sensory systems, model-based navigation systems, and inertial navigation systems This fully revised Second Edition includes innovative research in hydrodynamics and GNC systems for marine craft, from ships to autonomous vehicles operating on the surface and under water. Handbook of Marine Craft Hydrodynamics and Motion Control is a must-have for students and engineers working with unmanned systems, field robots, autonomous vehicles, and ships. MSS toolbox: https://github.com/cybergalactic/mss Lecture notes: https://www.fossen.biz/wiley Author’s home page: https://www.fossen.biz
Download or read book NASA Tech Briefs written by and published by . This book was released on 2000 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonanalytical Methods For Motor Control written by Dejan Popovic and published by World Scientific. This book was released on 1995-11-15 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes non-conventional methods of control of human extremities, emphasizing the fact that conventional approaches used in robotics are limited when used in humans for restoration of reaching and grasping (goal-oriented movements), and standing and locomotion (cyclic movements). The use of artificial neural networks, inductive learning, skill-based expert systems and finite-state representation of movements is the base of this non-conventional control theory. A specific number of realized applications are included in the book to illustrate how these computer techniques can improve the function of assistive systems in physically challenged humans. The theory presented is applicable to the control of robots and industrial manipulators.
Download or read book Intelligent Motion Control written by and published by . This book was released on 1990 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
